well then. that should be easy. now ill ust have to measure the differences in the lengths and then apply that to give a similar trail.

 

iv got inverted 750 forks on my 600 gsxr..

has anyone went that route besides me?

I like my forks.. they seem to have not blown tho my left side is about to go.. and i put it through a world of hurt..

Inverted to Non-inverted what you guys like better??

I havent really ridden my f4i enough to compare the front ends from eachother but overall the bikes iv ridden i like the 750 forks !

 

inverted are better. they are more rigid.

 

Somebody around here used 03/04 636 forks with 954 triples on F4I. He had to make shims for the lower triple because they're smaller at that point. The front end tweaked real easy because of the shims and he ended up putting stock F4I back on

 

what do you mean tweaked? its shouldnt do that as long as everything is tight. sounds like the shims were to thin

 

not as easy as you are thinking...

think about it... just because kawi forks slide into 954 triples... which RIM are you going to use... the 954 will have the right width/spacing but most likely has a different size axle... the 636 rim is probably no the exact same width and the rotor spacing might be off, and the spacers will most likey be off... AND you still have that axle issue cause you are trying to use a kawi axle with honda fork spacing...

50mm doesnt mean everything else is the same...

like roger said, anything is DOABLE... custom spacers/bearing/axle/etc... is it WORTH it or is it easy enough that it's worth doing...

just some more info for you to think about... keep at it if you really want it you will find a way...

 

oh but for what its worth, with some thinker fork oil and maybe a spring i have seen stock F4i forks work well and roll consistant 500+ ft stoppies... might be WAY easier than frankensteining a kawi front end on...

 

eh too much work.

im actually just gonna do the fork fluid thing. easy and cheap is the name of the game when youre laid off for the winter. lol


how about i get the 636 frame welded and ride it instead of the f4i. lol.

 

i put a 1000 gsxr front end on my gsxr 600. very doable with a gsxr.:YEAH

 

the 750 and 1000 forks are the same right. i know there different from the 600

 

the 1000 and 750 are both inverted. but my bike wasnt in my posseion when the forks were done.. so i dont know the specd

I do know that i was talking about having 1000 forks on my 600 and everyone told me i was a idiot and there 750 forks. So id put my money on that they are different

wild guess.. just a diff tree- forks etc and its ez as lego's

late edit..

do all the 1000's have gold forks?

 

04 and up have gold forks for every size