Question about making a 06 cbr 600rr streetfighter....

Thread Tools
 
Search this Thread
 
Old Aug 15, 2007 | 02:36 PM
  #1  
Juar3z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 686
From: Las Cruces, NM, USA
Juar3z is a decent person
Question about making a 06 cbr 600rr streetfighter....

this has prolly alrdy been answered but the search is a POS!!!! k well can i make my bike streetfighter and can i just take the gauge off and leave it off? or do i have to have it on my bike? and how can i leave the side fairings on? and does any1 have Acerbis Diamond Headlight for sale? a black 1

Last edited by Juar3z; Aug 15, 2007 at 02:41 PM.
Old Aug 15, 2007 | 02:41 PM
  #2  
VerticalLimits's Avatar
Registered User
 
Joined: Jul 2006
Posts: 1,470
From: St. Augustine, FL
VerticalLimits is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

there is only one way to find out..... TRY IT...... but yes
Old Aug 15, 2007 | 02:41 PM
  #3  
SIC J's Avatar
Registered User
 
Joined: Aug 2003
Posts: 2,198
From: O'side, CA
SIC J is an unknown quantity at this point
Re: Question about making a 06 cbr 600rr streetfighter....

yea you can ride it without the guages. and just dont unbolt the side fairings. it has a bolt right in the middle of the bike that holds the side fairing.

personally i think leavin the side fairings on looks more dumb than takin it off.
Old Aug 15, 2007 | 02:59 PM
  #4  
Juar3z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 686
From: Las Cruces, NM, USA
Juar3z is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

where do i hide my wires?
Old Aug 15, 2007 | 03:01 PM
  #5  
VerticalLimits's Avatar
Registered User
 
Joined: Jul 2006
Posts: 1,470
From: St. Augustine, FL
VerticalLimits is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

where they can't be seen




























and they won't get pinched or broken.....
Old Aug 15, 2007 | 03:10 PM
  #6  
theguy386's Avatar
Registered User
 
Joined: Jan 2006
Posts: 1,052
From: Los Angeles, CA
theguy386 is an unknown quantity at this point
Re: Question about making a 06 cbr 600rr streetfighter....

just zip-tie your gauges anywhere you have room... as for the Acerbis headlight you can get them at either Warped Toys or HAI
Old Aug 15, 2007 | 03:50 PM
  #7  
Juar3z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 686
From: Las Cruces, NM, USA
Juar3z is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

yeah i figured to get it at hai.... and since the search os broken can any1 point me in teh right direction on how to disable my tip sensor
Old Aug 15, 2007 | 05:05 PM
  #8  
SIC J's Avatar
Registered User
 
Joined: Aug 2003
Posts: 2,198
From: O'side, CA
SIC J is an unknown quantity at this point
Re: Question about making a 06 cbr 600rr streetfighter....

some people just switch 2 of the wires around (dont know which colors they are off had). i cut you tip sensor open (the lower part where its a half circle), poor the water out and take out that piece that swivels. that way you dont ever have to worry about the wires that you butt-connected pullin out on you or anything else goin wrong.
Old Aug 15, 2007 | 06:48 PM
  #9  
DaHammer's Avatar
haters are your best fans
 
Joined: May 2006
Posts: 849
From: Fort Campbell,KY
DaHammer is an unknown quantity at this point
Re: Question about making a 06 cbr 600rr streetfighter....

for the wires. i ziptied mine up nicely and stuffed em into the intake and it worked fine

for the tip over sensor. cut the red and green wires and tie em together

also, id suggest not cutting up ur wiring harness for the headlight. dont make the same mistake i did. just run it to a switch and hide it behind the acerbis headlight
Old Aug 15, 2007 | 10:12 PM
  #10  
Juar3z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 686
From: Las Cruces, NM, USA
Juar3z is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

my bad!!! double post

Last edited by Juar3z; Aug 15, 2007 at 10:49 PM.
Old Aug 15, 2007 | 10:13 PM
  #11  
Juar3z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 686
From: Las Cruces, NM, USA
Juar3z is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

Originally Posted by DaHammer
for the wires. i ziptied mine up nicely and stuffed em into the intake and it worked fine

for the tip over sensor. cut the red and green wires and tie em together

also, id suggest not cutting up ur wiring harness for the headlight. dont make the same mistake i did. just run it to a switch and hide it behind the acerbis headlight
k thanx so i tie the red and green wires together and thats it...?
Old Aug 15, 2007 | 10:27 PM
  #12  
Josh Faught's Avatar
Registered User
 
Joined: Sep 2005
Posts: 4,150
From: Georgetown,tx...THE OC
Josh Faught is an unknown quantity at this point
Re: Question about making a 06 cbr 600rr streetfighter....

Dont run out of gas if you run no gauges especially if your in a whoolie
Old Aug 15, 2007 | 10:54 PM
  #13  
burnfreestyle's Avatar
Registered User
 
Joined: Dec 2006
Posts: 787
From: Pensacola, FL
burnfreestyle is an unknown quantity at this point
Re: Question about making a 06 cbr 600rr streetfighter....

Originally Posted by PODIZZLE
Dont run out of gas if you run no gauges especially if your in a whoolie
+1 running out of gas mid whoolie definitely sucks......i check my gas about every 30 minutes depending on what i'm doing
Old Aug 15, 2007 | 11:02 PM
  #14  
Juar3z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 686
From: Las Cruces, NM, USA
Juar3z is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

i was on the highway rocking a wheelie and as soon as i brought it down i ran out of gas and i had the cluster.,... i forgot since i dented my tank the fuel sensor thought it had more gas then it did.... lol
Old Aug 16, 2007 | 01:06 AM
  #15  
VerticalLimits's Avatar
Registered User
 
Joined: Jul 2006
Posts: 1,470
From: St. Augustine, FL
VerticalLimits is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

Originally Posted by Juar3z
i was on the highway rocking a wheelie and as soon as i brought it down i ran out of gas and i had the cluster.,... i forgot since i dented my tank the fuel sensor thought it had more gas then it did.... lol

you my friend are retarded....... a dented tank has nothing to do with what the sensor reads........ it doesn't go off of mileage, just what fuel is in the tank, and that's at the bottom of the tank, not the top where the dent should be..... almost sounded cool though.....
Old Aug 16, 2007 | 01:25 AM
  #16  
spoondogg's Avatar
Registered User
 
Joined: Feb 2007
Posts: 678
From: willows,CA
spoondogg is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

Originally Posted by Juar3z
where do i hide my wires?
i got all mine zip tied to the frame above the spark plugs,behind the radiator,under the tank. in that little open area.....
Old Aug 16, 2007 | 01:26 AM
  #17  
binder929rr's Avatar
back in the saddle again
 
Joined: Apr 2003
Posts: 7,322
From: terre haute, IN
binder929rr is an unknown quantity at this point
Re: Question about making a 06 cbr 600rr streetfighter....

Originally Posted by VerticalLimits
there is only one way to find out..... TRY IT...... but yes
thank god i'm not the only one thinking that **** when i read it.

you can make your ugly *** streetfighter whatever the **** you want it. the plastics only come off if you have the IQ higher than brittany spears, so i guess that's up to you to determine if you can do that....judging by the fact that you are asking all of us this question, i think the answer is NO.

you ever seen a stuntbike before? there's your answer.
Old Aug 16, 2007 | 01:27 AM
  #18  
spoondogg's Avatar
Registered User
 
Joined: Feb 2007
Posts: 678
From: willows,CA
spoondogg is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

Originally Posted by spoondogg
i got all mine zip tied to the frame above the spark plugs,behind the radiator,under the tank. in that little open area.....
for the wires. i ziptied mine up nicely and stuffed em into the intake and it worked fine
sorry i didn't read the whole thing
Old Aug 16, 2007 | 01:28 AM
  #19  
binder929rr's Avatar
back in the saddle again
 
Joined: Apr 2003
Posts: 7,322
From: terre haute, IN
binder929rr is an unknown quantity at this point
Re: Question about making a 06 cbr 600rr streetfighter....

Originally Posted by VerticalLimits
you my friend are retarded....... a dented tank has nothing to do with what the sensor reads........ it doesn't go off of mileage, just what fuel is in the tank, and that's at the bottom of the tank, not the top where the dent should be..... almost sounded cool though.....
BURN!!! HAHA


damn, i love when squids try to talk big people talk and sound cool.

and ****, who's checking their tank every 30 minutes? your bike must be running REALLY rich! i put gas in it and i know that i can ride for quite a while before i burn off 2.5 gallons.
Old Aug 16, 2007 | 01:33 AM
  #20  
VerticalLimits's Avatar
Registered User
 
Joined: Jul 2006
Posts: 1,470
From: St. Augustine, FL
VerticalLimits is a decent person
Re: Question about making a 06 cbr 600rr streetfighter....

your freaking killing me man, long night at work huh....



All times are GMT -4. The time now is 07:14 PM.