bored today so I made this for a 636. . . . .
happy day. 
Registered User
Joined: Jun 2004
Posts: 3,289
From: Toronto
Re: bored today so I made this for a 636. . . . .
Your upper section looks just like mine, but your lower section looks to have no extra headlight mounts....Which SUCKS! Because that is the weakest point, the 636 stays need better headlight mounting or your not fixing the problem
Also I sell mine for $250 because they are made of 6061 billet aluminum plate and tube, which is very expensive. Also I TIG weld and CNC water jet cut my parts....If I made them out of steel without the CNC maching and TIG welding they would be much much cheaper...So I think you need to recalculate your price...People complain mine are expensive but my material and machinging cost is more then half the cost of the stay....I spend about 4-5hours on each stay and my profit is maybe $50, therefore I do it more for fun as I get payed $25 an hour at my day job and only $10 or so makin stays...
Its good to have options though as before I started makin them there was nothing but 905, and we all know those are CRAP! Im very interested to see your production model....
Also I sell mine for $250 because they are made of 6061 billet aluminum plate and tube, which is very expensive. Also I TIG weld and CNC water jet cut my parts....If I made them out of steel without the CNC maching and TIG welding they would be much much cheaper...So I think you need to recalculate your price...People complain mine are expensive but my material and machinging cost is more then half the cost of the stay....I spend about 4-5hours on each stay and my profit is maybe $50, therefore I do it more for fun as I get payed $25 an hour at my day job and only $10 or so makin stays...
Its good to have options though as before I started makin them there was nothing but 905, and we all know those are CRAP! Im very interested to see your production model....
Last edited by JohnnyP; Jun 25, 2007 at 12:00 PM.
I Chose to No Longer Post
Joined: Apr 2004
Posts: 37,827
Re: bored today so I made this for a 636. . . . .
Thread Starter
Naarden Bike Super Store
Joined: Feb 2006
Posts: 1,992
From: WWW.NAARDEN.BIZ ~ Sportbike Super Store
Re: bored today so I made this for a 636. . . . .
Your upper section looks just like mine, but your lower section looks to have no extra headlight mounts....Which SUCKS! Because that is the weakest point, the 636 stays need better headlight mounting or your not fixing the problem
Also I sell mine for $250 because they are made of 6061 billet aluminum plate and tube, which is very expensive. Also I TIG weld and CNC water jet cut my parts....If I made them out of steel without the CNC maching and TIG welding they would be much much cheaper...So I think you need to recalculate your price...People complain mine are expensive but my material and machinging cost is more then half the cost of the stay....I spend about 4-5hours on each stay and my profit is maybe $50, therefore I do it more for fun as I get payed $25 an hour at my day job and only $10 or so makin stays...
Its good to have options though as before I started makin them there was nothing but 905, and we all know those are CRAP! Im very interested to see your production model....
Also I sell mine for $250 because they are made of 6061 billet aluminum plate and tube, which is very expensive. Also I TIG weld and CNC water jet cut my parts....If I made them out of steel without the CNC maching and TIG welding they would be much much cheaper...So I think you need to recalculate your price...People complain mine are expensive but my material and machinging cost is more then half the cost of the stay....I spend about 4-5hours on each stay and my profit is maybe $50, therefore I do it more for fun as I get payed $25 an hour at my day job and only $10 or so makin stays...
Its good to have options though as before I started makin them there was nothing but 905, and we all know those are CRAP! Im very interested to see your production model....
$
$Naarden will be offering contingency for our american made products$$ 
I also need someone to support my dirty stripper habbits
and SI makes the round bar. we typically only make one-off kinds of items for riders looking for something a little different then already available, unless they are a sponsered rider then they get what they need.
Last edited by NAARDEN INC; Jun 27, 2007 at 12:05 AM.
Registered User
Joined: Oct 2005
Posts: 3,139
From: TLstunts.com
Re: bored today so I made this for a 636. . . . .
faring stay worked great especially since my headlight was a busted up to no end before i had the stay. so this stay killed it. I put my full weight on it and it literally worked like a champ.
Thread Starter
Naarden Bike Super Store
Joined: Feb 2006
Posts: 1,992
From: WWW.NAARDEN.BIZ ~ Sportbike Super Store
Re: bored today so I made this for a 636. . . . .
05-06 636 SuperMegaPro - StuntStay is done, i need an F4i upper fairing now and some chocolate chip cookies.
Registered User
Joined: Sep 2003
Posts: 1,277
From: bristol, patheticut
Re: bored today so I made this for a 636. . . . .
I want a 636 stay .
but i'm currently broke
jonnyp's stays are the dope ****
I must get some loot together to get one soon.
someday jonny someday
I got a 905 stay on my stunt bike (had to have it welded a bunch of times already. Is it me or does 905 purposley use cheap steel on al of there products?? theres a huge pile of twisted 905 cages in my garage lol!
think im gonna try a sick inovations next everyone saying there good.
I dunno
but i'm currently broke
jonnyp's stays are the dope ****
I must get some loot together to get one soon.
someday jonny someday
I got a 905 stay on my stunt bike (had to have it welded a bunch of times already. Is it me or does 905 purposley use cheap steel on al of there products?? theres a huge pile of twisted 905 cages in my garage lol!
think im gonna try a sick inovations next everyone saying there good.
I dunno
Thread Starter
Naarden Bike Super Store
Joined: Feb 2006
Posts: 1,992
From: WWW.NAARDEN.BIZ ~ Sportbike Super Store
www.TheXtremeShow.com
Joined: Feb 2005
Posts: 1,563
From: Daytona Beach, Fl
Re: bored today so I made this for a 636. . . . .
I want a 636 stay .
but i'm currently broke
jonnyp's stays are the dope ****
I must get some loot together to get one soon.
someday jonny someday
I got a 905 stay on my stunt bike (had to have it welded a bunch of times already. Is it me or does 905 purposley use cheap steel on al of there products?? theres a huge pile of twisted 905 cages in my garage lol!
think im gonna try a sick inovations next everyone saying there good.
I dunno
but i'm currently broke
jonnyp's stays are the dope ****
I must get some loot together to get one soon.
someday jonny someday
I got a 905 stay on my stunt bike (had to have it welded a bunch of times already. Is it me or does 905 purposley use cheap steel on al of there products?? theres a huge pile of twisted 905 cages in my garage lol!
think im gonna try a sick inovations next everyone saying there good.
I dunno
Sick Innovations makes good cages over all but no upper stays.....
Naarden is really the Man with this shizzle:YEAH
Later Bro!
www.TheXtremeShow.com
Joined: Feb 2005
Posts: 1,563
From: Daytona Beach, Fl
