forks forks forks....
forks forks forks....
ok i have a whole rc51 front end and i was wondering if it would bolt up to my f4i????
i am also selling some 06 636 forks, triples, calipers, rotors, and front wheel that has a wobble in it but i believe it is fixable.
i am also selling some 06 636 forks, triples, calipers, rotors, and front wheel that has a wobble in it but i believe it is fixable.
Re: forks forks forks....
Nope the RC51 front won't fit......sell it to me.
954/929 triples and RC51 everything else.....awesome match for the F4i.
Re: forks forks forks....
The Neck Is Different, But The Diameter Of The Forks Will Slid Into 929/954 Triples. The Forks Are Short Though, So It Will Dip The Bike Down In The Front.
Most People Put Their Clipons On Top Of The 929/954 Triples, So The Forks Are Slid Down About 2 Inches. You Wont Be Able To Do That With The Shorter Rc51 Forks. Also, You'll Need Front Wheel, Disks, Calipers, Etc. From The Rc. Its Easier To Find 929/954 Wheels Disks Etc.
Most People Put Their Clipons On Top Of The 929/954 Triples, So The Forks Are Slid Down About 2 Inches. You Wont Be Able To Do That With The Shorter Rc51 Forks. Also, You'll Need Front Wheel, Disks, Calipers, Etc. From The Rc. Its Easier To Find 929/954 Wheels Disks Etc.
Re: forks forks forks....
The Neck Is Different, But The Diameter Of The Forks Will Slid Into 929/954 Triples. The Forks Are Short Though, So It Will Dip The Bike Down In The Front.
Most People Put Their Clipons On Top Of The 929/954 Triples, So The Forks Are Slid Down About 2 Inches. You Wont Be Able To Do That With The Shorter Rc51 Forks. Also, You'll Need Front Wheel, Disks, Calipers, Etc. From The Rc. Its Easier To Find 929/954 Wheels Disks Etc.
Most People Put Their Clipons On Top Of The 929/954 Triples, So The Forks Are Slid Down About 2 Inches. You Wont Be Able To Do That With The Shorter Rc51 Forks. Also, You'll Need Front Wheel, Disks, Calipers, Etc. From The Rc. Its Easier To Find 929/954 Wheels Disks Etc.
nice work
Re: forks forks forks....
How about SC 57 (05 1000rr) front end on 02 F4i? Will it fit without mods?
And how much would you give for a complete set (triples, brake lines and calipers, front wheel witch brake discs) ?
And how much would you give for a complete set (triples, brake lines and calipers, front wheel witch brake discs) ?
Re: forks forks forks....
oh yea,you wont to move it to where the stop hits right before the fork hits the frame
Re: forks forks forks....
If it has the same bearings as a 954 you need to switch the races out.
F4/F4i/929 = Ball Bearings and matching races
954 = Pin bearings and matching races
You can swap all of the above to pin or ball.
F4/F4i/929 = Ball Bearings and matching races
954 = Pin bearings and matching races
You can swap all of the above to pin or ball.
Re: forks forks forks....
Thread
Thread Starter
Forum
Replies
Last Post
C-Dub
Stunt Discussion
3
Jul 16, 2013 11:02 AM








