ok today i was wiring up some hotbodies flush mount turn signals, i hooked up the neg. to the neg. & the running light wire & t. signal wire together to the possitive. turned on the power & the t.signal indicators on the gage were both light up & the fricking turn signals dont do ****,,any ideas??

 

here is an idea, you wired it wrong. trial and error my friend. there are only so many ways you can wire it up. just keep re-wiring and trying until you get it. the worst that will happen is you will blow some fuses. good luck.

 

http://www.600rr.net/vb/showthread.php?t=46853

 

i thing that will help,,i'll try it in the morning. thanks man:YEAH

 

Actually you probally have them wired 100% right you need to get a "load equalizer" its an led signal and the bike is wired for regular bulbs wich use about 10x the power of an LED this is probally about the cheapest youll get.

http://www.kuryakyn.com/products.asp?bn=metric&ci=2974

 

... or use a resistor you can buy from radio shack like he said =P in that write up =P

 

i got a 20watt 8 oms resistor & now they work great, thanks for the help guys.