Quick question guys......Is there anything I should do on my '04 636 as for as motor mods for stuntin'......an oil pickup or anything I can do to help[ save the motor or is this thing ready to go out of the box????

 

the airbox mod but its a ***** kane did it to his which ended up drillin a hole inthe top cover all kindsa bs. find the thread on here and you'll see

 

Unless you plan on doing bar tricks i wouldn't worry about it

 

agreed.

 

there's tons of 636 info on here, just do a search

crankcase vent mod is only necessary if you do bar tricks


get a cage and go rock out!

 

I dont even have a bar but when I scrape my subframe/passenger seat or even do long wheelies on the highway I dump oil in the air box.....So its not just for bar trickers, Id do the mod just to be safe.....

 

after not running a bar for this long i would recommend grabbin a round bar that way the $$$ tail stays somewhat ok and a cage i rock a powers on mine its virtually indestructible with the rear axle spools you'll virtually never brake a rear set. I would however invest in the woodcraft they have been awesome for me and numerous other riders i know.

 

+1 on the woodcrafts

 

woodcrafts??

 

Woodcraft is a company that makes aftermarket rear sets. I used to break rearsets alot. I switched to them i havent broke any yet.

 

i also have a 636...crankcase vent mod? oil goes into the airbox...does it cause the FI(fuel injection) light to come on bc just recently mine came on?

 

your fi light prob came on because you put a aftermarket pipe on **** it take the gauges off you dont need them

 

A friend blew his motor learnin slow stuff due to the airbox/crankcase problem. I would highly recomend the mod.

 

do the airbox mod,I ran a hose from the case up on the side of the frame and it comes out on the right side and rest on my radiator with a filter on it(no probs).rearsets brake so go d dam n easy it makes me mad just thinking about it now.stock clip-ons must be strong cause i'm still running my originals.subframe bent kinda easy back when i was doing bar tricks.I had to put a new camchain in it cause it was stretched to the max.My frame broke 2 weeks ago in all sorts of places and just got all that welded up (not from crashing either!)its a real good bike but sh it breaks easy on it.been through selveral radiators too.

 

ohh.......my motor has been sounding like its going to blow up any second for the last 6 months or so.......get a manual camchain tensioner!!!!!!!!!!!!

 

u'll this kit also

 

I have a manual CCT (never used) and a radiator 4 sale if anyone is interested 03-04 636, along with some forks PC3 and some other things

 

i used to alot of chain saws but it blew the big end so i would not recomend them at all thanks for all the advice on here though is cool to get all the latest

 

do you have a frame?

 

I have a 905 dual caliper rear brake set up for an 03-04. It comes with the plate and one caliper. It's never even been mounted. All you need is the line and master.

pm me if you want it