Vortex Clip-ons???
Registered User
Joined: Jun 2004
Posts: 3,289
From: Toronto
Re: Vortex Clip-ons???
Originally Posted by TEACH C6
HOW is pvm better? woodcraft looks the same - you can take the actual clipon on and off withougt removing the triple...
and 50+ bucks for the bar?? thing better have my name in gold flake on each bar!!!
heli makes ones with risers, dunno about sportbikes though
and 50+ bucks for the bar?? thing better have my name in gold flake on each bar!!!
heli makes ones with risers, dunno about sportbikes though
Registered User
Joined: Apr 2003
Posts: 2,965
From: J.ville, N.Carolina
Re: Vortex Clip-ons???
Originally Posted by JohnnyP
A few companies do but it depends how much you wanna sepnd and if you want adjustable or fixed position.......You need 50mm for the 636
Heres a pic of some so you get an idea of whats available
Not or 636 but you get the idea
http://www.helibars.com/proddetail.php?prod=HB2603
red ones are raisers
http://www.spieglerusa.com/cfm/clipon.cfm?type=offset
adjustable risers
http://www.twobros.com/Perf_Products...Handlebars.htm
these are nice lots of adjustabbility
http://www.convertibars.com/Photos.cfm
The gilles are pimp too
http://www.gillestooling.com/en/prod...b/ausleger.php
You should get the idea
Heres a pic of some so you get an idea of whats available
Not or 636 but you get the idea
http://www.helibars.com/proddetail.php?prod=HB2603
red ones are raisers
http://www.spieglerusa.com/cfm/clipon.cfm?type=offset
adjustable risers
http://www.twobros.com/Perf_Products...Handlebars.htm
these are nice lots of adjustabbility
http://www.convertibars.com/Photos.cfm
The gilles are pimp too
http://www.gillestooling.com/en/prod...b/ausleger.php
You should get the idea
Registered User
Joined: Jun 2004
Posts: 3,289
From: Toronto
Re: Vortex Clip-ons???
No problem 
These are expensive but imagine the all the possible bar positions
http://www.convertibars.com/images/P...sakiZX6RRa.jpg
These are expensive but imagine the all the possible bar positions
http://www.convertibars.com/images/P...sakiZX6RRa.jpg
Gas'er!!
Joined: Oct 2002
Posts: 6,272
From: from the East to the West
Re: Vortex Clip-ons???
Originally Posted by JohnnyP
PVM have adjustable bar down angle Woodcraft are fixed angle at 7 degrees I believe.......Thats why you can only use PVM replacement bars on PVM clipons they are machined specially at the end of the bar to fit the PVM clipon as you rotate the bar the angle changes.
good info...i'll stick with my woodcraft because the price is right and the quality is there.
300 bucks for clipons is a LOT to pay, and for how much gain?
Registered User
Joined: Jun 2004
Posts: 3,289
From: Toronto
Re: Vortex Clip-ons???
Originally Posted by TEACH C6
good info...i'll stick with my woodcraft because the price is right and the quality is there.
300 bucks for clipons is a LOT to pay, and for how much gain?
300 bucks for clipons is a LOT to pay, and for how much gain?
You get what you pay for those bars require machine work where regular bars are just cut to lenght........And Im sure the machining of the clipons are also more comlicated, so the high price is justified but if its worth it or not is up to the buyer.
Woodcraft stuff is real good quality I bought their engine cover because for the money you get the best out there with the built in replacable slider and all. I also have their full rearset kit on its way, took your advice on that purchase and Im sure I'll be happy with them aswell. I would have went with the Woodcraft clipons if it wasnt for FI offereing them with no angle......But if I decide I dont like the FI's Woodcrafts are next for sure.
Registered User
Joined: Jul 2004
Posts: 1,045
From: Harrisburg, PA
Re: Vortex Clip-ons???
Originally Posted by JohnnyP
Not much gain for you or me but if the adjustability it what you need then thats what its gonna cost......
You get what you pay for those bars require machine work where regular bars are just cut to lenght........And Im sure the machining of the clipons are also more comlicated, so the high price is justified but if its worth it or not is up to the buyer.
Woodcraft stuff is real good quality I bought their engine cover because for the money you get the best out there with the built in replacable slider and all. I also have their full rearset kit on its way, took your advice on that purchase and Im sure I'll be happy with them aswell. I would have went with the Woodcraft clipons if it wasnt for FI offereing them with no angle......But if I decide I dont like the FI's Woodcrafts are next for sure.
You get what you pay for those bars require machine work where regular bars are just cut to lenght........And Im sure the machining of the clipons are also more comlicated, so the high price is justified but if its worth it or not is up to the buyer.
Woodcraft stuff is real good quality I bought their engine cover because for the money you get the best out there with the built in replacable slider and all. I also have their full rearset kit on its way, took your advice on that purchase and Im sure I'll be happy with them aswell. I would have went with the Woodcraft clipons if it wasnt for FI offereing them with no angle......But if I decide I dont like the FI's Woodcrafts are next for sure.
Registered User
Joined: Apr 2003
Posts: 2,965
From: J.ville, N.Carolina
Re: Vortex Clip-ons???
Originally Posted by JohnnyP
No problem
These are expensive but imagine the all the possible bar positions
http://www.convertibars.com/images/P...sakiZX6RRa.jpg
These are expensive but imagine the all the possible bar positions
http://www.convertibars.com/images/P...sakiZX6RRa.jpg
Wow!!! almost can make it a chopper
Wheelie Ninja!
Joined: May 2004
Posts: 4,755
From: Las Vegas NV
Re: Vortex Clip-ons???
I had the woodcraft before on both my GSXR and 636... i liked em they were much better than stock.
i recently switched to the Vortex and wow.. I really like them. in my opinion much higher quality than the woodcrafts that I had prior (keep in mind the woodcraft that i had were an older model) and the benefits of clip ons are pnenominal!! i would ride stock ever again...
-Kane
i recently switched to the Vortex and wow.. I really like them. in my opinion much higher quality than the woodcrafts that I had prior (keep in mind the woodcraft that i had were an older model) and the benefits of clip ons are pnenominal!! i would ride stock ever again...
-Kane
Registered User
Joined: May 2005
Posts: 99
From: columbus ohio
Re: Vortex Clip-ons???
just orderd converti bars let uknow how they are little pricey but they come with all new cables longr and 3 inch longer braided speigler brake lines fully adjustable from 1 inch below stock up to 6 inches above they look pimp so well see need to get them so ican get used to them plan on entering longest stoppie as stunt wars hope to meet all u cats down there onone in the house TEAMONONE.COM what up teach and kane hopefully we get to kick it in florida were also bringing are wheelie machine latr justin convertibars.com
Registered User
Joined: Jul 2004
Posts: 159
From: Cincinnati, Ohio
Re: Vortex Clip-ons???
Harris Performance Clip-ons
Stock setting & High Rise=$130.00 shipped
Vortex=$130.00 shipped
www.cincystunters.com
www.hondaoffairfield.com
:YEAH
Stock setting & High Rise=$130.00 shipped
Vortex=$130.00 shipped
www.cincystunters.com
www.hondaoffairfield.com
:YEAH
Brap
Joined: Jul 2004
Posts: 10,417
From: Scottsdale, AZ
Re: Vortex Clip-ons???
So I guess I just read the Woodcraft are 7 degree. I was trying to look this up cause I wanted to check out the F.I 0 degree ones. I picked up some woodcrafts for $105 shipped. I try these for awhile I guess.
Thread
Thread Starter
Forum
Replies
Last Post
AnabolicPrimate
Stunting Help and Advice
0
Feb 13, 2014 05:03 PM
