FIDDY TECH: Help, How-to, Parts & Mods Have a technical question? Looking for the best parts? Want to share some info on new fiddy parts you bought or have seen? Post it up here!

Foam Pit??

Old Dec 14, 2003 | 07:56 PM
  #1  
matt's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 26
From: ShaVegas Wi
matt is an unknown quantity at this point
Foam Pit??

I want to build my own foam pit any ideas where to get the foam they use? That or maybe we will have to learn backflips into snow banks!
Old Dec 14, 2003 | 09:38 PM
  #2  
smoothkustard's Avatar
Regular StuntLifer
 
Joined: Feb 2003
Posts: 510
From: Erie, PA
smoothkustard is an unknown quantity at this point
look in the phone book under foam. there is a place near me that all they do is sell foam. or check local gymnastic places and ask them where they get their foam
Old Dec 16, 2003 | 02:16 AM
  #3  
NickIF's Avatar
Registered User
 
Joined: Jun 2003
Posts: 1,692
From: Chicago, IL
NickIF is an unknown quantity at this point
**** is expensive
Old Dec 16, 2003 | 10:51 AM
  #4  
Registered User
 
Joined: Jul 2003
Posts: 762
From: Michigan
Natedogg is an unknown quantity at this point
I heard it cost a dollar for each square foot.... I don't know how many you need but it will cost a lot..
Old Dec 19, 2003 | 01:34 AM
  #5  
HB wetland mxer's Avatar
Registered User
 
Joined: Nov 2003
Posts: 28
From: huntington beach, CA
HB wetland mxer is an unknown quantity at this point
I heard its like a$1.50 per block and you need something like 2,000 of em....
Old Oct 13, 2006 | 04:46 PM
  #6  
P Fiddy Combs's Avatar
Registered User
 
Joined: Jul 2006
Posts: 46
From: Marlboro<New Yawk>USA
P Fiddy Combs is an unknown quantity at this point
Re: Foam Pit??

diY FOAM PIT....

(1) BACKHOE/BULLDOZER
(2) WAREHOUSE/SHIPPING/RECIEVING
(3) CALL THEM AND ASK FOR SCRAP PACKING FOAM
- STYRAFOAM, FOAM RUBBER, PACKING PEANUTS, BUBBLEWRAP, EGGCRATE, CARDBOARD BOXES
(4) THROW ALL THAT sH*T IN THE BIG HOLE YOU JUST DUG WITH YOUR BACKHOE
(5) CREATE A LAUNCH RAMP
(6 ) BREAK YO SELF FOOL!
Old Oct 13, 2006 | 11:03 PM
  #7  
rufryda921's Avatar
Registered User
 
Joined: Oct 2004
Posts: 178
From: rocky point ny
rufryda921 is an unknown quantity at this point
Re: Foam Pit??

lol find like alot of busses ad rip apart the seats
Old Oct 14, 2006 | 12:43 AM
  #8  
Registered User
 
Joined: May 2006
Posts: 44
From: Queens,NY
evan1342 is an unknown quantity at this point
Re: Foam Pit??

find some old sofas
Old Oct 14, 2006 | 01:22 AM
  #9  
old man roger's Avatar
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: Foam Pit??

most furniture stores remove old couches when you buy anew one if they deliver they probably just throw them away and carpet stores always take the old padding under the carpet but i think that stuff is reallllllly flamible
Old Oct 15, 2006 | 03:11 AM
  #10  
turboglenn's Avatar
Registered User
 
Joined: Jan 2005
Posts: 732
From: omaha
turboglenn is an unknown quantity at this point
Re: Foam Pit??

foam is easy to come by, if you're up for scavenging local stores and ****,...then jus build a ramp and a big box for hte foam
Old Oct 15, 2006 | 03:17 AM
  #11  
old man roger's Avatar
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: Foam Pit??

aloooooooooooooooot of foam
Old Jan 7, 2007 | 07:37 AM
  #12  
thumpy's Avatar
Registered User
 
Joined: Oct 2006
Posts: 1
From: australia
thumpy is an unknown quantity at this point
Re: Foam Pit??

fill a quarter of it with tyres them put chicken wire over them and then put foam on the top
Old Jan 25, 2007 | 10:37 PM
  #13  
racerx82989's Avatar
Registered User
 
Joined: Aug 2006
Posts: 18
From: Racine
racerx82989 is an unknown quantity at this point
Re: Foam Pit??

lots of pillows!
Old Feb 20, 2007 | 10:55 PM
  #14  
Ryan14250F's Avatar
Registered User
 
Joined: Nov 2006
Posts: 168
From: Nashville ,TN
Ryan14250F is an unknown quantity at this point
Re: Foam Pit??

get a neck brace while ur at it too lol
Old Feb 20, 2007 | 10:57 PM
  #15  
GSWITCH33's Avatar
Senior Moderators
 
Joined: Jun 2005
Posts: 4,291
From: Alexandria, MN
GSWITCH33 is a glorious beacon of lightGSWITCH33 is a glorious beacon of lightGSWITCH33 is a glorious beacon of lightGSWITCH33 is a glorious beacon of lightGSWITCH33 is a glorious beacon of light
Re: Foam Pit??

Most pits use furniture foam. And yes it is hella expensive!
Old Feb 20, 2007 | 11:30 PM
  #16  
D. STUNTER's Avatar
Registered User
 
Joined: Jan 2005
Posts: 439
From: Houston , TX
D. STUNTER is an unknown quantity at this point
Re: Foam Pit??

Originally Posted by old man roger
that stuff is reallllllly flamible

this is and article from transworld motocross....

Foam Pit Fire at Metzger's

Who said that flipping into foam pits was safe? Garth Milan just phoned in to let us in on some breaking news...

While out at Mike Metzger's house today, a Japanese rider was making use of Mike's foam pit to work on his back flips. Unfortunately he crashed, and while still laying in the pit, his bike was leaking gas a considerable amount of gas, and…well, you can probably guess the rest. Garth said that in short order, someone noticed smoke, and shortly after that the foam pit was fully engulfed in flames that were running 200-300 feet high. The resulting mushroom cloud could be seen for miles around.

The bad news was that there weren't any fire extinguishers around, which might have helped them avoid the situation before it got out of control. The good news is, the rider was extracted before the fire got too serious, and it didn't appear any other structures were threatened.
Old Feb 20, 2007 | 11:39 PM
  #17  
GSWITCH33's Avatar
Senior Moderators
 
Joined: Jun 2005
Posts: 4,291
From: Alexandria, MN
GSWITCH33 is a glorious beacon of lightGSWITCH33 is a glorious beacon of lightGSWITCH33 is a glorious beacon of lightGSWITCH33 is a glorious beacon of lightGSWITCH33 is a glorious beacon of light
Re: Foam Pit??

I remember reading about that, that japanese guy came all the way to the US with his only dirtbike and loses it in that fire.....That had to suck.






Good luck ever getting home owner insurance with a foam pit
Old Feb 20, 2007 | 11:44 PM
  #18  
D. STUNTER's Avatar
Registered User
 
Joined: Jan 2005
Posts: 439
From: Houston , TX
D. STUNTER is an unknown quantity at this point
Re: Foam Pit??

http://www.transworldmotocross.com/m...630808,00.html

foam pit fire! holy ****
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jacob Payne
Newbie Welcome Center
0
Sep 23, 2015 01:54 PM
razorgang
XR50 & Minibike Forums
4
Jan 27, 2014 02:19 AM
ASM13
Stunt Bike Videos and Reviews
0
Jul 22, 2013 06:53 PM
kjm5200
Everything Else
0
Feb 23, 2013 04:03 PM
ducKhunt
XR50 & Minibike Forums
0
Dec 12, 2012 04:44 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:53 PM.