I have an 02 R6, carbed. I can get my hands on a full 03 R6 fuel injection setup for pretty cheap. Would I be able to adapt it to my '02 R6? How much work would it involve. I think it would be worth the work if it will adapt. TIA

~ick

 

Ttt Ttt

 

No one knowledgable about this?

Nick

 

are you keeping the same motor if then i have no idea if your going with the 03 motor i would guess you would have to swap all electrics

 

Yea, the plan is to keep the 02 motor. I have the FI and engine wire harness from an 03. Just wondering if there is anyone that knows any info on this so im not doing it blindfolded.

Thanks,
Nick

 

dahdahdahdumdedumdum

 

bump...

 

maybe I'll just make this my own personal thread and write things to myself come awwwwn, no gear heads out there?

 

look at the '03 harness and see where all the connections go. more then likely (almost positively) there are gonna be more connections on the '03 harness then you can make on the '02 motor. things like a cam or crank sensor aren't neccessary on a carbed bike, but neccessary on a FI bike. there's probably a few other sensors that are necesary for a '03 that you won't find on an '02. either you're gonna end up with an '02/'03 hybrid motor or a no go on anything. your best bet is to get a '03 service manual, see where everything goes and then see where you stand. but you'll more then likely end up spending alot more then just on the FI.

 

yaaa, someone's input :YEAH haha, thats what I was thinking, also wondering how the bolt pattern is, if its the same. Will 03 motors fit in a 02 frame(r6's)?

 

goto r6rider.com maybe someone there can help u more

 

the only way i'd do it is if you swapped an entire 03 FI motor (kit car style) from airbox to pipe, header to tranny!(03 wiring included) I belive there are way more sensors for the fi set up