Towlieee

Will 05 600rr parts swap to a 03 600rr frame for SURE?!


Friend is gonna trade his newer quad for a 03 600rr, and found a deal on a 05 frame in town.. And was gonna have me swap it all

Is it a direct swap?

sdfkillz

only major difference in the bikes that im aware of are the forks and subframe. i know all the plastics are swapable and engine cages are all the same so i would assume the frames are the same.

R*skeered*R

i think they are sooo different that it's going to scare you when you do it but if you get it done let me know so i can ride it or maybe just take it home for a week or so

DECEPTICON13

its exactly the same, my bro has a 2005 motor, sub on a 2003 frame , and little here and theres.

Towlieee

When you say a little heres and there, you mean a little 03 and a little 05 parts right?

Not "a little of this wont fit and a little of that"?


I have NO problem with plastics not being exact, or headlights, or like exhaust hangar or whatever..

I'm just worried about swinger/shock/forks/engine/tank/

bornreadybc

I just talked to tony prez.. who had a RR and did some swaping and he said all the parts swap out nice... the subframe is different but it bolts up the same.. just like if you have a subcage for 03-04 wont fit the 05-06...

DECEPTICON13

everything goes straight over to the best of my knowledge..

bornreadybc

what he said

kosi28

It works i got a 05 motor in a 04 frame and the 03 frame is the same as 04 the only difference between the 03-04 and 05-06 is the subframe, forks, triple tree, exhaust rear mount!!!!! Any questions just pm me ill square you away!!!

Towlieee

Well I'll figure it out, swapping it tomorrow

kntmare181

Most will fit. but some wont! have FUN!

skillz

have fun , it aint like doing an f4i

Towlieee

ya there is a lot of different **** on here

Just got the new frame on :YEAH

Had to already build a custom tool

Towlieee

Well so far so gravy

Got the swinger, engine, wires all hooked up

Gotta throw the forks/tank/plastics on :YEAH

bornreadybc

gr8 to hear

Towlieee

Doh, I musta missed something

not getting the fuel pump to prime



Checked over everything for about a hour... All relays are perfect and hooked up, TPS hooked up, all injectors/air box sensor hooked up, I tried jumping the tip over sensor, it says its in neutral and putting the kickstand up doesn't help, pretty much everything looks hooked up, and looks fine

but no fuel pump, and it doesn't run

skillz

the 3 relays that are together one is for the fuel pump the other 2 for the fan , doesnt take much for corrosion to build up on those terminals try cleaning them or swappig them around , worth a shot

Towlieee

I believe my friend swaped em around (SAID he did anyways)



Imma wait tell tomorrow to look at it again, maybe jump the diagnostics port and see if it shows me any warning codes

I'll also switch the relays around



Its a 05 or 06 (can't remmeber the year exactly...) so I don't think its a corrosion problem

Although I didn't personally look at the relays, only my friend did

Hopefully I can get this thing running early tomorrow.. I wanna ride, and I'm stuck working on his bike tell It moves

skillz

I have an 06 and it happen 2 me twice last year, when i say corrosion it doesnt neccesarily mean that powdery white **** on the terminals, this bike is very sensitive to this and it doesnt take much to screw up these relays. even if the terminals look fine clean them up anyways and spray down with electronic contact cleaner corrosion inhibitor

R*skeered*R

I DID CHECK ALL AND SWAP ALL THE RELAYS SO I KNOW THEY'RE NOT BAD BUT AS OF CORROSION I DON'T KNOW ALTHOUGH THEY LOOKED GOOD THE FEMALE SIDE COULD BE CORRODED. I'LL GET SOME SPRAY.