just wnat to know where to get mag wheels instead of spoke wheels

 

www.classichondausa.com

or

http://www.fast50s.com/cart/customer/home.php?cat=22

 

they say you have to use z50 hub whats up with that so what do you need to do once you get them to install them on your tire and they are tubeless right cause the whole point of wantin one is because i pop to many tires from useing low tire pressure the spokes are poppin the tire or do you have any other suggestions about this

 

You can use a Z50 tire and rim and hub for the rear. $45 on ebay, but you can't use a z50 front tire with the stock xr50 forks. The xr50 forks are not wide enough. You would have to use Z50 forks on the xr to make it work and thus buy a Z50 bar clamp. Still this would be cheaper than those expensive xr custom wheels.

I'd say to throw a z50 wheel on the rear with a nice new tube and tire and leave the xr50 rim on the front. Its usually the rear tire that blows out on our 50's. Hope this helps.


I've yet to pop a tube even with low pressure on my Z with dirt or street tires.

:YEAH

 

cool man thanks ill check it out

 

i looked on ebay couldnt find what you are talkin bout if you see something on there just post the link here for me and i would really appreciate it thanks again

 

http://cgi.ebay.com/ebaymotors/ws/eB...category=10066

http://cgi.ebay.com/ebaymotors/ws/eB...category=10066

http://cgi.ebay.com/ebaymotors/ws/eB...category=35601

This stuff is on there all the time. These aren't in the greatest shape but you could sand and paint them.

Good Luck :YEAH

 

tighten your spokes, then take off your tire and use duct tape around the rim to cover up the spoke heads. make a couple passes with it, it will hold the rubber piece in place and keep from poking the rim

 

who in the hell would ruin their XR with all this crap?? Zs are gay eddie. time to face the fasts.

 

i just thought of this too, buy some epoxy and cover all the spoke tops in the rim and get a valve stem from a bike shop, be less than $10 and you could run tires without tubes.

let me know, i might do this too

 

Did you mean "FACTS", you uneducated bastard?



And Z's are cool, especially mine. .....and it is street legal too!

 

sorry bout the typo homo. not everyone cant be perfect like you.
call me when yer ready for that transmission. :YEAH

 

call me when yer ready for that transmission. :YEAH



End of this month, I will send it to you while I'm on vacation.

 

www.50rims.com

 

Hey whitey...why you keep raising your prices? People still buy em that expensive?

 

I am negotating with dealers, and they don't want me selling below dealer cost. So I set a MSRP price, Sik50's are now listing my rims on their site. I can't sell below their price becuase of dealer qty pricing. My rims are worth every penny, one piece construction, custom widths, disc brake versions etc.

So we set MSRP @ $599.00 a set. Which is very competitive with the market, for a custom set of billet rims.

thanks
Jeff

 

I guess i can understand you trying to make some money. They look like badass wheels, it just sucks cause everytime I look at em the price is higher. Kinda makes me wish i woulda got some when they were cheap.

 

i thought you made those because you could do em cheap, how about the players price for us, you know what im sayin

 

If your serious PM me...

 

Damn, 6 hundo? Not that they're not worth it or anything, but I was just telling a guy tonight about how pimp your wheels were and that you were only charging $350 instead of $600 like everybody else...