need a pimp graphics kit
need a pimp graphics kit
something that'll look good on white plastics.. only thing is, I hate all these kits that are covered in brand names and ****.. If you aint paying me I dont want your **** on my bike 
Registered User
Joined: Dec 2003
Posts: 519
From: Grand Rapids ,MI
Re: need a pimp graphics kit
Originally Posted by nags
something that'll look good on white plastics.. only thing is, I hate all these kits that are covered in brand names and ****.. If you aint paying me I dont want your **** on my bike
I think that http://www.rideltd.com/ is about the only one that doesnt get to carried away with showing off their name. plus they have some that I think would look
on wgite plastic... just my 
but think those are the ones I've seen 
Registered User
Joined: Dec 2003
Posts: 519
From: Grand Rapids ,MI
Re: need a pimp graphics kit
Gotta buy that kit for my buds GF.... promised her if she got a fiddy I'd buy her that kit. She went and bought one the next day. Still waiting on the kit though.... told her she has to wait for mine to be big bored and shes gotta ride it more than once every two months. Dont want it to be like her CR80. Bike has like 10 or 15 hours and thats stretchin it.
Re: need a pimp graphics kit
Originally Posted by not7fifteen
Those Ride Ind. kits are
Good find, the ghost flame one that starts silver and fades to white at the back would look hot on a white fiddy IMO.
Good find, the ghost flame one that starts silver and fades to white at the back would look hot on a white fiddy IMO.
I'll probably go with the non ghost flamed silevr one... it'll be PIMP with the seat i'm getting :YEAH
Re: need a pimp graphics kit
anyone know where to get 'em cheap?
I Enjoy Posting At StuntLife!
Joined: Apr 2003
Posts: 1,571
From: Shelby Twp, MI
Re: need a pimp graphics kit
heres another sweep one, no names on their stuff either http://www.xtreme-graphix.net/ sets there
sets there Re: need a pimp graphics kit
Originally Posted by BUZZMAN
heres another sweep one, no names on their stuff either http://www.xtreme-graphix.net/ sets there
sets there Re: need a pimp graphics kit
<img src="http://www.xtreme-graphix.net/images/honda/cr1250_flm.jpg">
Registered User
Joined: Dec 2003
Posts: 519
From: Grand Rapids ,MI
Re: need a pimp graphics kit
thats the only draw back to the ride ones.... havent found a place to get em thru yet other than off their site. something like 90 a set.... thats why I went with the red baron ones... dont look bad and only 50 for complete set
Re: need a pimp graphics kit
Originally Posted by justbiznez
thats the only draw back to the ride ones.... havent found a place to get em thru yet other than off their site. something like 90 a set.... thats why I went with the red baron ones... dont look bad and only 50 for complete set
got a pic?
Registered User
Joined: Dec 2003
Posts: 519
From: Grand Rapids ,MI
Re: need a pimp graphics kit
only recent one i have... bikes a little dirty...think if you get ahold of red baron their making a white one... just dont know if its been released yet. http://www.rbracinginc.com/products/04bikegraphics.php
Re: need a pimp graphics kit
not bad, but i just hate the huge name on it...
Re: need a pimp graphics kit
Originally Posted by TEDDY.B
is it wrong that i think that bike is hot as hell 
Registered User
Joined: Oct 2002
Posts: 2,267
From: Dallas, TX
Re: need a pimp graphics kit
Nags - do what I did.
You can buy some vinyl at a sticker/sign shop for cheap - 5.00 a foot.
then draw out you pattern for one side, then flip it over and trace it to the other. Us an razor blade and sizzors to cut it out. Then apply it with a hair dryer. us a niddle to push out the air bubbles if any. I also used a credit card when putting it on for less air bubbles.
After that - use the thick clear stuff the MX guys use on their number plates to cover it.
I traced out the edges of a Fast 50s kit on to paper and then looked at my 900 and some what copied the pattern. Took me about one night or so to do it all. *I bought the Honda loga and wing at a motorcycle shop. I was gona put an XR on it to match - but did not.
*I didn't want to have the same look as everyone else. But now they are coming out with some cool kits, the one above is great.
Tha flame one would be good if you could trim out the black and then put it on the white plastic.
You can buy some vinyl at a sticker/sign shop for cheap - 5.00 a foot.
then draw out you pattern for one side, then flip it over and trace it to the other. Us an razor blade and sizzors to cut it out. Then apply it with a hair dryer. us a niddle to push out the air bubbles if any. I also used a credit card when putting it on for less air bubbles.
After that - use the thick clear stuff the MX guys use on their number plates to cover it.
I traced out the edges of a Fast 50s kit on to paper and then looked at my 900 and some what copied the pattern. Took me about one night or so to do it all. *I bought the Honda loga and wing at a motorcycle shop. I was gona put an XR on it to match - but did not.
*I didn't want to have the same look as everyone else. But now they are coming out with some cool kits, the one above is great.
Tha flame one would be good if you could trim out the black and then put it on the white plastic.
Group Moderator
Joined: Oct 2002
Posts: 2,053
From: Merrimack NH
Re: need a pimp graphics kit
Originally Posted by DoubleR Dan
Nags - do what I did.
You can buy some vinyl at a sticker/sign shop for cheap - 5.00 a foot.
then draw out you pattern for one side, then flip it over and trace it to the other. Us an razor blade and sizzors to cut it out. Then apply it with a hair dryer. us a niddle to push out the air bubbles if any. I also used a credit card when putting it on for less air bubbles.
After that - use the thick clear stuff the MX guys use on their number plates to cover it.
I traced out the edges of a Fast 50s kit on to paper and then looked at my 900 and some what copied the pattern. Took me about one night or so to do it all. *I bought the Honda loga and wing at a motorcycle shop. I was gona put an XR on it to match - but did not.
*I didn't want to have the same look as everyone else. But now they are coming out with some cool kits, the one above is great.
Tha flame one would be good if you could trim out the black and then put it on the white plastic.
You can buy some vinyl at a sticker/sign shop for cheap - 5.00 a foot.
then draw out you pattern for one side, then flip it over and trace it to the other. Us an razor blade and sizzors to cut it out. Then apply it with a hair dryer. us a niddle to push out the air bubbles if any. I also used a credit card when putting it on for less air bubbles.
After that - use the thick clear stuff the MX guys use on their number plates to cover it.
I traced out the edges of a Fast 50s kit on to paper and then looked at my 900 and some what copied the pattern. Took me about one night or so to do it all. *I bought the Honda loga and wing at a motorcycle shop. I was gona put an XR on it to match - but did not.
*I didn't want to have the same look as everyone else. But now they are coming out with some cool kits, the one above is great.
Tha flame one would be good if you could trim out the black and then put it on the white plastic.
i wouldnt take time to do cause i am lazy, but that looks schweeet and fact that you made it all, to match ya bike.big props !
Re: need a pimp graphics kit
or I could just print it up myself considering I work for sportbikedecals.com 
