Ok.....I got some 7/8" bars(i think) and what all do i need?
I know i need a triple clamp but what about a throttle body? How much rise can they have without needing a longer brake cable?
Thanks.....

 

you'll need a throtle tube, 2 grips, a perch(for your brake), and you might be able to get away with hooking your brake up with your stock calbe. but i'm not for shur

 

Can i just use a old bmx perch and lever? Or its it some special cable end?

 

Yep, im using a bmx lever with bicycle cables! haha no problems yet.

3 dollars for 6 feet of cable...couldnt let that go...

 

What forks are those?

 

looks like xr70 forks alot of people swith there stock forks out and put the 70 forks in.

 

how much do they lift the front? are they good for jumping? do you just use the xr70 tripple?

 

Good deal..what about those handlebar risers than rise and forward the stock bars?

 

i used clamps off a ex400. i have an extra set if you need them pm me. i'm almost done with mine. i'm working onthe brake right now. i used a perch from a bmx bike and the lever off the fifty (bmx lever are to small imo). i think is should be able to use the stock cable , its gonna be close (my forks are stock). i bought a throttle body with grips form www.dratv.com for i think 20 bucks. the clamps cost me 15. and used an old bmx for the bars and perch. under $40 bucks. i'll post a pic when i'm done

 

You can run stock throttle tube and stock brake mount.

 

Ill keep that offer in mind. Thanks everyone!