Tubeless rims
Tubeless rims 
03-31-2010, 03:56 PM
#3
Registered User
Join Date: Oct 2008
Location: Coquitlam, BC
Posts: 371
Re: Tubeless rims
http://www.alexwarehouse.com/Supermo...els_p3126.html
these are the wheels i am going to order for my klx110 stunt bike!
these are the wheels i am going to order for my klx110 stunt bike!
04-14-2010, 02:59 PM
#6
Registered User
Join Date: Feb 2009
Location: Portland, Or, USA
Posts: 319
Re: Tubeless rims
06-03-2010, 06:53 PM
#7
Registered User
Join Date: Jun 2010
Location: stratford,ca,usa
Posts: 1
Re: Tubeless rims
check this out a friend of mine took a regular rim got some stuff from auto parts store called plastic coat and then ran about inch and half wide bead of the plastic coat around the center of the rim making sure all the spokes were coverd then got tubeless valve stem put in the rim and put a little of the plastic coat around the valve stem just for grins dont know if its even necessary.
ok now he mounted the tire on the rim but before trying to air it up he ran a small bead of silicon around both sides of the tire that contact the rim for a good seal.
I then watched him air up the tire and with a little tweaking of the tire it sealed aired up to pressure he then took a rag and wiped off any of the silicon that squezed out.
this was on his 125 been over 4 months now still holding.
ok now he mounted the tire on the rim but before trying to air it up he ran a small bead of silicon around both sides of the tire that contact the rim for a good seal.
I then watched him air up the tire and with a little tweaking of the tire it sealed aired up to pressure he then took a rag and wiped off any of the silicon that squezed out.
this was on his 125 been over 4 months now still holding.
06-04-2010, 11:15 AM
#8
Registered User
Join Date: Apr 2008
Location: hazleton pa
Age: 37
Posts: 791
Re: Tubeless rims
check this out a friend of mine took a regular rim got some stuff from auto parts store called plastic coat and then ran about inch and half wide bead of the plastic coat around the center of the rim making sure all the spokes were coverd then got tubeless valve stem put in the rim and put a little of the plastic coat around the valve stem just for grins dont know if its even necessary.
ok now he mounted the tire on the rim but before trying to air it up he ran a small bead of silicon around both sides of the tire that contact the rim for a good seal.
I then watched him air up the tire and with a little tweaking of the tire it sealed aired up to pressure he then took a rag and wiped off any of the silicon that squezed out.
this was on his 125 been over 4 months now still holding.
ok now he mounted the tire on the rim but before trying to air it up he ran a small bead of silicon around both sides of the tire that contact the rim for a good seal.
I then watched him air up the tire and with a little tweaking of the tire it sealed aired up to pressure he then took a rag and wiped off any of the silicon that squezed out.
this was on his 125 been over 4 months now still holding.
Thread
Thread Starter
Forum
Replies
Last Post
hks03evo8
Bike Parts for Sale
1
11-28-2014 06:26 PM
xenster
Bike Parts for Sale
0
05-03-2013 10:00 PM
