bogging and sticking throttle
Thread Starter
Registered User
Joined: Apr 2008
Posts: 6
From: GREENVILLE, SC, USA
bogging and sticking throttle
2005 crf 50 is bogging when gasing it hard and seems like the idle is sticking. I cannot seem to find out why. Carb has been cleaned. New throttle cable. Need ideas. Its not the throttle tube sticking because it snaps back and closes but you can still hear it dieing down a lot slower than it should
Registered User
Joined: Aug 2009
Posts: 80
From: Waco, Texas
Re: bogging and sticking throttle
and how exactly does an "idle stick"?
its because your carb is impoperly tuned, or possibly an air leak between the carb and cylinder.
the idle is just a screw that keeps the slide open, no it can not "stick", just get your carb dialed in right and your golden.
its because your carb is impoperly tuned, or possibly an air leak between the carb and cylinder.
the idle is just a screw that keeps the slide open, no it can not "stick", just get your carb dialed in right and your golden.
Last edited by FiveStarSky; Dec 14, 2009 at 05:35 PM.
Registered User
Joined: Aug 2009
Posts: 97
From: lecanto, FL, USA
Re: bogging and sticking throttle
"...just get your carb dialed in right and your golden. "
Last edited by FiveStarSky; Today at 05:35 PM.
+1 I was having probs just like you....fiddle around with the carb, play with your mixture and idle screws....it's hit or miss...eventually you will find the right setting for you...it's a pretty simple procedure, just takes a little work....
Last edited by FiveStarSky; Today at 05:35 PM.
+1 I was having probs just like you....fiddle around with the carb, play with your mixture and idle screws....it's hit or miss...eventually you will find the right setting for you...it's a pretty simple procedure, just takes a little work....
Thread
Thread Starter
Forum
Replies
Last Post
C-Dub
Stunt Discussion
6
Jun 24, 2013 05:07 PM
jmoney2001
Service, Repair, and Maintenance
1
Jun 16, 2013 03:38 AM
