San Diego fiddy stunters needed
Re: San Diego fiddy stunters needed
p.s.
I will teach too. 70 foot endos, wheelies, stand-up wheelies, dork wheelies (standing on rear pegs), standing on seat wheelies, nac-nac and can-can wheelies, circle wheelies, 180 endos, ect... Right now I'm working on linking 10 and 15 trick combos and working on getting a big-bore kit and disk brakes to get endos over a 100 feet and 60 mph stand up wheelies.
If you really don't want to try and push the sport of fiddy stunting, then let's atleast freakin just ride together.
I will teach too. 70 foot endos, wheelies, stand-up wheelies, dork wheelies (standing on rear pegs), standing on seat wheelies, nac-nac and can-can wheelies, circle wheelies, 180 endos, ect... Right now I'm working on linking 10 and 15 trick combos and working on getting a big-bore kit and disk brakes to get endos over a 100 feet and 60 mph stand up wheelies.
If you really don't want to try and push the sport of fiddy stunting, then let's atleast freakin just ride together.
Last edited by American Phyco; Aug 26, 2006 at 10:11 PM.
Re: San Diego fiddy stunters needed
You can do a 70 foot endo going down hill tapping out around 38 completely stock and of course you can't do 60 without a big bore, that's why I said I wanted to get one.
Re: San Diego fiddy stunters needed
Sorry
I bet a 124cc kit could get you to 60 mph if you change the sprockets (and or trans ratios) .
Kitaco or Takegawa
make thread about it
Ok back on topic .
I bet a 124cc kit could get you to 60 mph if you change the sprockets (and or trans ratios) .
Kitaco or Takegawa
make thread about it
Ok back on topic .
Re: San Diego fiddy stunters needed
I have a 108TB that hits mid 50's
Geared 2 up in front.
With the right gearing you could get mid 60's out a a kitaco/tag 124 but that will cost you over $4000 and that is just motor parts, I only have $900 or so into my motor.
Geared 2 up in front.
With the right gearing you could get mid 60's out a a kitaco/tag 124 but that will cost you over $4000 and that is just motor parts, I only have $900 or so into my motor.
Re: San Diego fiddy stunters needed
D- thanks for your response...what the douche above missed in the original point is expressing an interest in getting my bike to do 60mph. It's a 100% stock except for a $40 dollar spring in the rear, rear pegs and a bmx handle bar. I was interested on hearing what people who have their **** tricked out had to say. This kid had to f*** that up. But thanks for your feedback.
Re: San Diego fiddy stunters needed
i've seen 192 feet stoppie on a stock fiddy..so it's not unreasonable it's on film to boot..... a big bore isn't needed for it neither are disk brakes.. jsut get it to balance as fast as possible and use as little brake as possible once you're there
Re: San Diego fiddy stunters needed
Originally Posted by rufryda921
call me a douche because i said i couldnt see how u could do a 70 foot stoppie. your a **** sucker
Thread
Thread Starter
Forum
Replies
Last Post










