I made a really 12 bar...its two round pipes bent to the exact bend on the subframe and they are U bolted on... I hade to skill saw off the exaust mount so that my 12 bar would sit right up against the subframe for the st stength...theN i drilled a hole thrrough the 12 bar where the exause used to mount and put a bolt through the hole so that the exuast is mounted on the 12 bar. it came out really nice ill try to put pics up tomrow but somone will have to put them up for me cuz IDK how..BTW it took me about 2 hours

 

Where's the pics?

 

wanna make 1 for me, ill pay ya thru paypal

 

Ok ill have pics of it up by tommorow...If u wana buy it I will sell it for 50 dollars. Although it does take some modifcation its extremley strong and will not bend ur subframe. thanks talk to u guys tomroow.(its deffinatly up there with the other bars that cost around 70 dollars, its no 175 dolar bar but it works, its strong and its pretty light...)

 

here is one I made, took about an hour and a half to make, super strong angle Iron w/ cross braces. no drilling for mounting, double thick skid plate. I love it so far

 

in use

 

rieguy...the problem with yours is that it doesnt go all the way down to the bottom of the subframe so it will bend if u hit it hard alot. Mine doesnt drill into the subframe it bolts on but u need to modify the exaust mount minorly to make it work. was testing in tonight and it holds up nice...

 

Hey Guys just thought i would add my 2 cents to the bar convo..i made my own bar for 15$ from local welding shop most important part is the subframe i used a top and side gussets im 210 pounds and i have came back on bar very hard many many times..anyone want specs pm me

 

I made mine for 10 dollars im selling it if ne wants for 50, if u sell urs for 15 dollars ur retarded cuz ur just loosing money....

 

ill buy urs for 25

 

still wating to see 50outlaws pics