OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years
• CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

im out but Niner when you get on...

what was that site you said you get chain/sprockets for the supermoto?...i cant remember. thanks

 

I hate my job.

 

i need some fiber

 

heres part of what I've been working on the last 2 weeks

 

It's now all covered in the first surface coat

 

damn that doesn't look like a lot of fun

 

There was 2 weeks in between those 2 pictures.. Theres so much reinforcement and building up with wood under all that

 

The only cool part is that everyone is cool, I basically do what I want.. I can show up late or stay late or leave early or whatever and I've got no one over me or anything. They say "hey do this" and then I'm on my own for weeks.. Theres rarely anyone in the room with me either

But still. I'd rather be playing at a computer all day.

 

www.onoffroad.com
How hard is the fuel filter on our trucks to swap out?
Other than "good morning" I haven't said any thing other than the 2 minute conversation my second day of work over a month and a half ago.

 

very simple

 

Crowfoot wreches, old one off new one on, 2 fitting nuts? How much fuel leaks out? Should I be putting down cardboard or rags?

Driving 700 miles this weekend so I figure now is a good time to do an oil change and fuel filter swap.

 

remove the cap by hand, unscrew old filter, replace o-ring, screw on new filter ... i drained the water too, it makes a little mess if you don't put something underneath

 

Isn't there one on the frame rail too?

 

you dont even know?

you ****** f250 squid

 

on the frame rail? i think you are thinking of the fuel pump

 

I'm thinking of the 6.0's maybe. I'll have to get under there and look tonight.

 

checking some messages

 

you two suck...lol

 

ok back to work i go