Does height matter in a rolling long endo?¿ - Bicycle Stunters

(Turbo) · 08-08-2006, 10:14 PM

Does height matter in a rolling long endo? Because When i have my seat up high to practice coasters i cant do as high rolling endos.

Stuntone0one · 08-08-2006, 10:17 PM

balance point is relative to center of gravity.

if your seat is super low, but your only 1 inch from flipping, you'll be rolling a long endo.

if your seat is super high, and your 1 inch from flipping, you'd be rolling the same distance, if not more, than with your seat down low.

(Turbo) · 08-08-2006, 10:20 PM

Yeah but i cant get the rear wheel up as high when my seat is high. Plus it looks cooler when your back wheel is high even if you dont go as far

Stuntone0one · 08-08-2006, 10:30 PM

distance between the grouind and your rear wheel is irrelavent.

distance of the center of gravity is what's important.

if your seat is up higher, it just chances the balance point. even if the rear wheel isn't super high off the ground, if your at BP, you can still roll just as long as if your seat was down. and perhaps longer, as you don't need to waste as much speed getting to balance point.

it just differnt man, you'll get used to it, give it time.

(Turbo) · 08-08-2006, 10:32 PM

ok. cuz i always think i am gonna loop it. lol

Stuntone0one · 08-08-2006, 10:55 PM

yes it's easier to loop with a lower seat, just gotta learn to use less brake.

you'll get used to it.

(Turbo) · 08-08-2006, 10:56 PM

Its easer to loop it with a lower seat. i thought it is easer to loop it with a higher one....well to me it is...

Stuntone0one · 08-08-2006, 11:07 PM

sorry, i'm doing like 30 things right now, that was a typo.

(Turbo) · 08-08-2006, 11:08 PM

oh lol ok

Wheelie Boy · 10-09-2006, 01:46 AM

Rolling endos were some fun shit.

Turbo, you're gonna loop. Be prepared for it.

Flipping sucks, espically when you do it as fast as I was going for endos. I ran my seat high so I could get to the balance point right away. With the seat mounted lower, I could get the rear tire higher up, but by time I got the balance point I would lose over 1/2 my speep.

Back when I rode, I averaged 80 to 85ft rolling, and on the last day I did bmx bikes, I was hitting over 120, then my crank broke and I quit.

Peter Steele · 12-14-2006, 05:21 PM

here this is me learing how to get th height http://www.youtube.com/watch?v=KvH_x1RLqkQ

(Turbo) · 04-02-2008, 11:23 PM

NVM old thread i have a new front Hydraulic break. im doing them high for 60ft now (20 meters) and im doing 180 ones

ed91 · 04-04-2008, 08:25 AM

Quote:

Originally Posted by (Turbo)

NVM old thread i have a new front Hydraulic break. im doing them high for 60ft now (20 meters) and im doing 180 ones

turbo pls this topic is dead DEAD!!! lol

hazemabdulrab · 06-09-2008, 12:34 AM

how the hell do u guys do long endos?......one of the things i learned about practicing bicycle stunts......is that only will practie,practice,practice, will get u where u want.........but im not sure if im doing it right...can someone please start a thread giving advice..im gonna talk to nagz about making a subforum or something..so the bicycle forum can grow

Peter Steele · 06-09-2008, 03:36 AM

Quote:

Originally Posted by hazemabdulrab

how the hell do u guys do long endos?......one of the things i learned about practicing bicycle stunts......is that only will practie,practice,practice, will get u where u want.........but im not sure if im doing it right...can someone please start a thread giving advice..im gonna talk to nagz about making a subforum or something..so the bicycle forum can grow

Practise

100%_sukkafree · 08-01-2008, 02:52 AM

Quote:

Originally Posted by hazemabdulrab

how the hell do u guys do long endos?......one of the things i learned about practicing bicycle stunts......is that only will practie,practice,practice, will get u where u want.........but im not sure if im doing it right...can someone please start a thread giving advice..im gonna talk to nagz about making a subforum or something..so the bicycle forum can grow

banned

View Poll Results: Does height matter in rolling long endos?
Yes:	29	87.88%
No:	4	12.12%
Voters: 33. You may not vote on this poll

08-08-2006, 10:14 PM	#1
(Turbo) Registered User Join Date: Aug 2006 Location: Wisconsin Rapids, Age: Bike: Fuji Stuntfire Gender: Male Posts: 177	Does height matter in a rolling long endo?¿ Does height matter in a rolling long endo? Because When i have my seat up high to practice coasters i cant do as high rolling endos. Last edited by (Turbo) : 08-08-2006 at 10:57 PM.

08-08-2006, 10:17 PM	#2
Stuntone0one Registered User Join Date: May 2006 Location: MI Age: Bike: mongoose Gender: Male Posts: 525	Re: Does height manner in a rolling long endo?¿ balance point is relative to center of gravity. if your seat is super low, but your only 1 inch from flipping, you'll be rolling a long endo. if your seat is super high, and your 1 inch from flipping, you'd be rolling the same distance, if not more, than with your seat down low.

08-08-2006, 10:20 PM	#3
(Turbo) Registered User Join Date: Aug 2006 Location: Wisconsin Rapids, Age: Bike: Fuji Stuntfire Gender: Male Posts: 177	Re: Does height manner in a rolling long endo?¿ Yeah but i cant get the rear wheel up as high when my seat is high. Plus it looks cooler when your back wheel is high even if you dont go as far

08-08-2006, 10:30 PM	#4
Stuntone0one Registered User Join Date: May 2006 Location: MI Age: Bike: mongoose Gender: Male Posts: 525	Re: Does height manner in a rolling long endo?¿ distance between the grouind and your rear wheel is irrelavent. distance of the center of gravity is what's important. if your seat is up higher, it just chances the balance point. even if the rear wheel isn't super high off the ground, if your at BP, you can still roll just as long as if your seat was down. and perhaps longer, as you don't need to waste as much speed getting to balance point. it just differnt man, you'll get used to it, give it time.

08-08-2006, 10:32 PM	#5
(Turbo) Registered User Join Date: Aug 2006 Location: Wisconsin Rapids, Age: Bike: Fuji Stuntfire Gender: Male Posts: 177	Re: Does height manner in a rolling long endo?¿ ok. cuz i always think i am gonna loop it. lol

08-08-2006, 10:55 PM	#6
Stuntone0one Registered User Join Date: May 2006 Location: MI Age: Bike: mongoose Gender: Male Posts: 525	Re: Does height manner in a rolling long endo?¿ yes it's easier to loop with a lower seat, just gotta learn to use less brake. you'll get used to it.

08-08-2006, 10:56 PM	#7
(Turbo) Registered User Join Date: Aug 2006 Location: Wisconsin Rapids, Age: Bike: Fuji Stuntfire Gender: Male Posts: 177	Re: Does height manner in a rolling long endo?¿ Its easer to loop it with a lower seat. i thought it is easer to loop it with a higher one....well to me it is...

08-08-2006, 11:07 PM	#8
Stuntone0one Registered User Join Date: May 2006 Location: MI Age: Bike: mongoose Gender: Male Posts: 525	Re: Does height matter in a rolling long endo?¿ sorry, i'm doing like 30 things right now, that was a typo.

08-08-2006, 11:08 PM	#9
(Turbo) Registered User Join Date: Aug 2006 Location: Wisconsin Rapids, Age: Bike: Fuji Stuntfire Gender: Male Posts: 177	Re: Does height matter in a rolling long endo?¿ oh lol ok

10-09-2006, 01:46 AM	#10
Wheelie Boy Registered User Join Date: Sep 2002 Location: Chicago Land Age: 18 Bike: Diamondback - joker Gender: Male Posts: 3,187	Re: Does height matter in a rolling long endo?¿ Rolling endos were some fun shit. Turbo, you're gonna loop. Be prepared for it. Flipping sucks, espically when you do it as fast as I was going for endos. I ran my seat high so I could get to the balance point right away. With the seat mounted lower, I could get the rear tire higher up, but by time I got the balance point I would lose over 1/2 my speep. Back when I rode, I averaged 80 to 85ft rolling, and on the last day I did bmx bikes, I was hitting over 120, then my crank broke and I quit. __________________ www.ibwsstunts.com Jetto Funk: im eatin pancakes motowheelies: AHAHAHA Jetto Funk: i took a piss and didnt wash my hands Jetto Funk: now im lickinb my fingers motowheelies: HHAHAHAHAHAHAA R6bbie: the best riders....dont talk R6bbie: they show up motowheelies: no wonder you never shut the hell up motowheelies: who wartywarthog69: what are u a fukkin 12yr old owl? motowheelies: ahahahahaha

12-14-2006, 05:21 PM	#11
Peter Steele Registered User Join Date: Apr 2006 Location: melbourne, australia, Age: 21 Bike: gixa 600 k6 PitPro 138cc, 06 DRZ 400Sm stunted Gender: Male Posts: 384	Re: Does height matter in a rolling long endo?¿ here this is me learing how to get th height http://www.youtube.com/watch?v=KvH_x1RLqkQ

04-02-2008, 11:23 PM	#12
(Turbo) Registered User Join Date: Aug 2006 Location: Wisconsin Rapids, Age: Bike: Fuji Stuntfire Gender: Male Posts: 177	Re: Does height matter in a rolling long endo?¿ NVM old thread i have a new front Hydraulic break. im doing them high for 60ft now (20 meters) and im doing 180 ones

06-09-2008, 12:34 AM	#14
hazemabdulrab I Chose to No Longer Post Join Date: Feb 2007 Location: DEARBORN,MICH-SHIT-GAN Age: 19 Bike: shared "08" r6 Gender: Male Posts: 954	Re: Does height matter in a rolling long endo?¿ how the hell do u guys do long endos?......one of the things i learned about practicing bicycle stunts......is that only will practie,practice,practice, will get u where u want.........but im not sure if im doing it right...can someone please start a thread giving advice..im gonna talk to nagz about making a subforum or something..so the bicycle forum can grow