05-06 636 SubFrames
Registered User
Joined: Jun 2004
Posts: 3,289
From: Toronto
Re: 05-06 636 SubFrames
talk to Dan Jackson and GURU they are rocking this sub after braking 8 stock subs Jackson made the call to C4-REVOLUTIOS and asked US to make this aftermarket sub for him. So we did and so far it works perfectly Like he said its the new hotness. Anyway you need to see it in person its stronger than it looks in the pics.
Cause I doubt they smash tail as much as other people will....Im sure its beef, it just looks real weak compared to the rest of it... 
A Few Loose Screws - DVD
Joined: Sep 2002
Posts: 4,078
From: Compton
Re: 05-06 636 SubFrames
This is the 05-06 636 Subframe that C4-REVOLUTIONS is making now. Feel free to contact them at 407 617 0006 to purchase one! Its worth the time and money you will save in the long haul...trust me!
[/
I rarely ever slam the tail or scrape becuase the the stock subframes are junk! I broke 7 subframes by just clutching it up with my foot in the bar! If you are just learning to stunt ride and like to gorilla scrape your tail, you had better call Dave and have him build you a subframe asap!
C4-REVOLUTIONS! 407 617 0006
C4-REVOLUTIONS! 407 617 0006
Thread Starter
Registered User
Joined: Sep 2003
Posts: 747
From: Stratford,CT
Re: 05-06 636 SubFrames
Why not continue the rail from the rear another few inches and weld it to the side of the existing tube? That looks like a weak link. I understand you are going for a stock look but shouldnt you beef it up a little more than just changing the materials its made from?
Thread Starter
Registered User
Joined: Sep 2003
Posts: 747
From: Stratford,CT
Re: 05-06 636 SubFrames
Where did you break this one, this time?
My friends always breaks at the rear, where the cast part bends and gets really thin. So when his last one broke there, I bent the cast part back down(the other side broke while I was doing that)....And welded a plate over top to prevent it from being able to bend up and snap....And its been good so far, but Im waiting for it to start giving on the sides next....
That aftermarket sub looks great, except for that skinny part at the back where my friends keeps breaking....I understand that steel not cast aluminum, but that still looks very weak to me.
My friends always breaks at the rear, where the cast part bends and gets really thin. So when his last one broke there, I bent the cast part back down(the other side broke while I was doing that)....And welded a plate over top to prevent it from being able to bend up and snap....And its been good so far, but Im waiting for it to start giving on the sides next....
That aftermarket sub looks great, except for that skinny part at the back where my friends keeps breaking....I understand that steel not cast aluminum, but that still looks very weak to me.
Registered User
Joined: Jun 2004
Posts: 3,289
From: Toronto
Re: 05-06 636 SubFrames
I could cut a hole in that plate for FIS, this guy doesnt even have a hole in his seat so I just left it like that.....We still havent seen any cracking at that sides yet, just at the back at the skinny part....And its TIG welded all the way around on both sides, so that rear section isnt going anywhere
Registered User
Joined: Jun 2007
Posts: 502
From: Winter garden, FL, US
Re: 05-06 636 SubFrames
You all need to just trust me when I say they are strong and fit stock there is more to it then the pics show and your pic of welding the two bars side by side will not work. Guys there is $2500.00 into the engineering of this 1 sub so there is nothing stronger than the way it is made now. I tried all the ways you are saying to make it it did not work. So trust me it is the **** and IS STRONG. thanks WE AT C4 know what we are doing computer and strength testing all gos into the making of the parts not like any other company we are the best out there so if we make it you should buy it.
Registered User
Joined: Jun 2006
Posts: 1,376
From: STeELTown Bitchez
Re: 05-06 636 SubFrames
Steel innovations here in Atlanta makes them for your bike. They are sick and hold up!! I have seen them in action first hand.
How much are they? Did I miss that??
You all need to just trust me when I say they are strong and fit stock there is more to it then the pics show and your pic of welding the two bars side by side will not work. Guys there is $2500.00 into the engineering of this 1 sub so there is nothing stronger than the way it is made now. I tried all the ways you are saying to make it it did not work. So trust me it is the **** and IS STRONG. thanks WE AT C4 know what we are doing computer and strength testing all gos into the making of the parts not like any other company we are the best out there so if we make it you should buy it.
It's cold out here
Joined: Oct 2006
Posts: 350
Re: 05-06 636 SubFrames
I may be wrong, but there has to be a "weakest link," correct? If this sub is so strong, doesn't that mean there are more chances of breaking the frame before the sub - just wondering? I'd rather buy more sub's than frames.
Registered User
Joined: Jun 2007
Posts: 502
From: Winter garden, FL, US
Re: 05-06 636 SubFrames
Good god I just cant win with you guys If you want one just order the damn thing and stop trying to pic the damn thing apart. Sorry but come on Dan Jackson Has one If you have questions ask him.
Registered User
Joined: Jan 2007
Posts: 2,027
From: blackwell ok.
Re: 05-06 636 SubFrames
You all need to just trust me when I say they are strong and fit stock there is more to it then the pics show and your pic of welding the two bars side by side will not work. Guys there is $2500.00 into the engineering of this 1 sub so there is nothing stronger than the way it is made now. I tried all the ways you are saying to make it it did not work. So trust me it is the **** and IS STRONG. thanks WE AT C4 know what we are doing computer and strength testing all gos into the making of the parts not like any other company we are the best out there so if we make it you should buy it.
yo, watup dave
Thread
Thread Starter
Forum
Replies
Last Post
f4i knight
Bikes for Sale
7
Feb 26, 2013 03:06 PM
