97 yamaha yzf1000 thunderace parts yzf 1000 [B]i have some spare thunderace parts laying around i need to sell. Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping. cylinder needs honed been sitting on self. $50 plus shipping. cylinder with cam chain tensioner need honned been sitting on self $60 bottom fairing piece but NOT the V piece for the font $50 plus shipping. solo rear seat fairing pearl white $150 plus shipping. COMPLETE triple trees (no ignition) $55 plus shipping taillight $10 plus shipping left side inner fairing panel $20 plus shipping start and on/off switch i have 2 of them $10 a piece i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame. starter clutch and came chain $15 coils one good one bad $10 3 slave cylinders forgot which one is good $20 for all 3 Oiler line from block to head with bolts $10 shifter shaft $15 clipons with 3 extra bars which are bent $20 2 sets of pistons $15 clutch drum and shift forks $25 sprocket cover $10 inside rear tail peices $10 rear master cylinder and brake line $40 passinger rear sets $20 right side rear set $25 front axle with spacer $10 clutch master cylinder $20 turn signal switchs i have 2 of them neither highbeam switch works $20 a piece throttle cable housing $10 radiator fan $20 oil pan with bolts $ 25 mirrors $40 gas tank with fuel valve and sending unit no gas cap $50[/B] [B]Email for pictures. thanks dan[/B] |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 i also have a set of brand new chrome rims for this bike, they have not been mounted since they were chromed. email for pictures |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 lord i thought i was the only guy that ever had one of those...still got mine under the house...lol pm me about those wheels lookn for some to put on my new r1 |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 I still have many of the parts listed above, and are also parting out my complete 97 yzf1000 thunderace. swingarm is strecthed 6 inches polished frame, wheels, swingarm. still have those minty chrome wheels that have never been mounted. thanks dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 Bump :hello |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 bump this shit is real cheap i need it gone. Dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 I need a prices on the rims and any other chromed or polished parts with pics.:yeah. email me at admin at brokersgrass.com. |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 chrome rims and swingarm have been sold. still have a ton of parts let me know what you need. thanks Dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [B]i still have alot let from this bike and lots or spare parts. [/B] [B]bottom belly fairings. $50 [/B] [B]i have 2 Good set of engine cases each comes with engine case bolts, cam chain guides, shifter shaft, oil pan with bolts, and some other pieces. (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 each plus shipping. [/B] [B]cylinder needs honed been sitting on self. $50 plus shipping. [/B] [B]cylinder with cam chain tensioner need honned been sitting on self $60 [/B] [B]COMPLETE triple trees (no ignition) $55 plus shipping [/B] [B]taillight $10 plus shipping [/B] [B]left side inner fairing panel $20 plus shipping [/B] [B]start and on/off switch i have 2 of them $10 a piece [/B] [B]i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame. [/B] [B]Also have another frame with clean and clear title in my name and its also polished no damage to frame $600. [/B] [B]starter clutch and came chain $15 [/B] [B]coils one good one bad $10 [/B] [B]have a good set of coils for $40 [/B] [B]airbox with K&N filter $20 [/B] [B]3 slave cylinders forgot which one is good $20 for all 3 [/B] [B]Oiler line from block to head with bolts $10 [/B] [B]shifter shaft $15 [/B] [B]2 sets of pistons $15 [/B] [B]clutch drum and shift forks $20 [/B] [B]sprocket cover $10 [/B] [B]inside rear tail peices $10 [/B] [B]rear master cylinder and brake line $40 [/B] [B]passinger rear sets $20 [/B] [B]right side rear set $25 [/B] [B]front axle with spacer $10 [/B] [B]clutch master cylinder $20 [/B] [B]turn signal switchs i have 2 of them neither highbeam switch works $20 a piece [/B] [B]throttle cable housing $10 [/B] [B]radiator fan $20 [/B] [B]i have 2 gas tanks with fuel valve and sending unit no gas cap $50 each [/B] [B]speedo with 26002 miles for $99 [/B] [B]headlight which has had 2 tabs repaired $75 [/B] [B]have clutch master cylinder line and slave cylinder in working order $60 [/B] [B]have complete clutch basket assembly for $75 [/B] [B]complete transmission for $75 [/B] [B]good set of connecting rods $30 [/B] [B]rear shock $50 [/B] [B]heli handlbars $75 one is very slighty tweaked, I never noticed when mounted on my bike. [/B] [B]buyer pays whatever the shipping cost are. [/B] [B]I have more parts not listed i just cant remmber what they are. [/B] [B]email for pictures and if you need something i dont have listed. [/B] [B]I am open to all offers. Thanks Dan[/B] |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 ill be hitting you up soon, might be picking a wrecked one up |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=Yamaha412;3835710]ill be hitting you up soon, might be picking a wrecked one up[/quote] ok just let me know. Thanks Dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 Two questions- Have you tested the headlight hi/lo switch to see whats wrong with them? Or opened them up? Also, do you have any seats? I didnt see any listed. Thanks |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=n3zix;3837506]Two questions- Have you tested the headlight hi/lo switch to see whats wrong with them? Or opened them up? Also, do you have any seats? I didnt see any listed. Thanks[/quote] the wire for the highbeam broke off its contact point, headlight still works fine, one is set up to run on a switch to turn headlight on or off. i have aftermarket corbin front seat no rips $125 shipped Thanks Dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 Hello sir, I am interested in the following. Can you provided pics, if you still have them? 1.inside rear tail peices $10 2.speedo with 26002 miles for $99 (is this the full cluster? & does it fully illuminate?) 3.heli handlbars $75 one is very slighty tweaked Also, do you have the rear brake rotor? feel free to email pics to [EMAIL="svn9low@yahoo.com"]svn9low@yahoo.com[/EMAIL] |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=svn9low;3855398]Hello sir, I am interested in the following. Can you provided pics, if you still have them? 1.inside rear tail peices $10 2.speedo with 26002 miles for $99 (is this the full cluster? & does it fully illuminate?) 3.heli handlbars $75 one is very slighty tweaked Also, do you have the rear brake rotor? feel free to email pics to [EMAIL="svn9low@yahoo.com"]svn9low@yahoo.com[/EMAIL][/quote] pictures have been sent, yes its full cluster and lights up. dont have a rear brake rotor. Dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 Hi there! Shock is still available? Is it in good shape w/o any leaks? How much miles on it? Could you send it overseas in to Russia? I'll pay with PayPal. All overseas charges you can check here [url]http://pe.usps.com/text/Imm/ps_013.htm#ep1603920[/url] i prefer USPS Express mail international/ Let me know if you interested, thanks |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=Alex of Rossia;3869174]Hi there! Shock is still available? Is it in good shape w/o any leaks? How much miles on it? Could you send it overseas in to Russia? I'll pay with PayPal. All overseas charges you can check here [URL]http://pe.usps.com/text/Imm/ps_013.htm#ep1603920[/URL] i prefer USPS Express mail international/ Let me know if you interested, thanks[/quote] i have responed to your pm. thanks dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 wheels have been sold, i only have 1 rear wheel left for $50 needs to be painted. still have a good clear title frame $600, also have gauge cluster $75 and aftermarket corbin seat for $100. open to all offers. have many rear sets, starters, altenators, cylinders, engine cases. etc.. let me know what you need i probably have it, i just forgot to list it.Thanks Dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 Send me pics of the tanks and throttle housing. [email]agardner@kelleydrye.com[/email] |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=GoBozo;3876410]Send me pics of the tanks and throttle housing. [EMAIL="agardner@kelleydrye.com"]agardner@kelleydrye.com[/EMAIL][/quote] pictures have been sent, also forgot to list i have 2 complete wires harness with all the electric boxes, both came from running bikes. also Have hindle header. Dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 justed listed all the parts i have copy and past this link to see the rest of the parts i have. thanks Dan [URL]https://www.stuntlife.com/forums/464-bike-parts-sale/250597-97-yamaha-yzf1000-parts.html#post3887620[/URL] |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 what color is [B]the left side inner fairing panel and the [/B][B] kick stands has the sensor [/B] |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=candikel;3932552]what color is [B]the left side inner fairing panel and the [/B][B]kick stands has the sensor[/B] [/quote] flat black, i might have a kickstand sensor i would have to look. pm me your email address if you want pics. Dan |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 I just picked up a late-1996 YZF1000 for cheap, but it's a basketcase. There's a lot of parts that I need, so can you send me an updated list of the parts you still have left? I'm trying to save some cash by getting used or slightly damaged parts to get my bike running... Please email me back ASAP! Rick |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=921Studio;3834303]I need a prices on the rims and any other chromed or polished parts with pics.:yeah. email me at [EMAIL="921studio@gmail.com."]921studio@gmail.com.[/EMAIL][/quote] |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=Dan_DGAF666;3544476][B]i have some spare thunderace parts laying around i need to sell. [/B] [B]Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping. [/B] [B]cylinder needs honed been sitting on self. $50 plus shipping. [/B] [B]cylinder with cam chain tensioner need honned been sitting on self $60 [/B] [B]bottom fairing piece but NOT the V piece for the font $50 plus shipping. [/B] [B]solo rear seat fairing pearl white $150 plus shipping. [/B] [B]COMPLETE triple trees (no ignition) $55 plus shipping [/B] [B]taillight $10 plus shipping [/B] [B]left side inner fairing panel $20 plus shipping [/B] [B]start and on/off switch i have 2 of them $10 a piece [/B] [B]i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame. [/B] [B]starter clutch and came chain $15 [/B] [B]coils one good one bad $10 [/B] [B]3 slave cylinders forgot which one is good $20 for all 3 [/B] [B]Oiler line from block to head with bolts $10 [/B] [B]shifter shaft $15 [/B] [B]clipons with 3 extra bars which are bent $20 [/B] [B]2 sets of pistons $15 [/B] [B]clutch drum and shift forks $25 [/B] [B]sprocket cover $10 [/B] [B]inside rear tail peices $10 [/B] [B]rear master cylinder and brake line $40 [/B] [B]passinger rear sets $20 [/B] [B]right side rear set $25 [/B] [B]front axle with spacer $10 [/B] [B]clutch master cylinder $20 [/B] [B]turn signal switchs i have 2 of them neither highbeam switch works $20 a piece [/B] [B]throttle cable housing $10 [/B] [B]radiator fan $20 [/B] [B]oil pan with bolts $ 25 [/B] [B]mirrors $40 [/B] [B]gas tank with fuel valve and sending unit no gas cap $50[/B] [B]Email for pictures. thanks dan[/B][/quote] |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 do you still have the gauges for the 97 yzf? 618-927-5586 rick |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 do you still have the -Complete clutch basket assembly $99 shipped |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 any chance you still have the triple tree? I really need just the top clamp. Thanks |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=Dan_DGAF666;3649932]i also have a set of brand new chrome rims for this bike, they have not been mounted since they were chromed. email for pictures[/quote] I would like to learn more about the chrome rims, the cost, and shipping for those rims. My email [email]wbozemanjr@msn.com[/email] thank you for your consideration. William |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [quote=Dan_DGAF666;3544476][B]i have some spare thunderace parts laying around i need to sell. Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping. cylinder needs honed been sitting on self. $50 plus shipping. cylinder with cam chain tensioner need honned been sitting on self $60 bottom fairing piece but NOT the V piece for the font $50 plus shipping. solo rear seat fairing pearl white $150 plus shipping. COMPLETE triple trees (no ignition) $55 plus shipping taillight $10 plus shipping left side inner fairing panel $20 plus shipping start and on/off switch i have 2 of them $10 a piece i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame. starter clutch and came chain $15 coils one good one bad $10 3 slave cylinders forgot which one is good $20 for all 3 Oiler line from block to head with bolts $10 shifter shaft $15 clipons with 3 extra bars which are bent $20 2 sets of pistons $15 clutch drum and shift forks $25 sprocket cover $10 inside rear tail peices $10 rear master cylinder and brake line $40 passinger rear sets $20 right side rear set $25 front axle with spacer $10 clutch master cylinder $20 turn signal switchs i have 2 of them neither highbeam switch works $20 a piece throttle cable housing $10 radiator fan $20 oil pan with bolts $ 25 mirrors $40 gas tank with fuel valve and sending unit no gas cap $50[/B] [B]Email for pictures. thanks dan[/B][/quote] I would like to buy the gas tank from you, if you can send photos and the price to me. My email is [email]wbozemanjr@msn.com[/email]. William |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 [QUOTE=Dan_DGAF666;3544476][B]i have some spare thunderace parts laying around i need to sell. Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping. cylinder needs honed been sitting on self. $50 plus shipping. cylinder with cam chain tensioner need honned been sitting on self $60 bottom fairing piece but NOT the V piece for the font $50 plus shipping. solo rear seat fairing pearl white $150 plus shipping. COMPLETE triple trees (no ignition) $55 plus shipping taillight $10 plus shipping left side inner fairing panel $20 plus shipping start and on/off switch i have 2 of them $10 a piece i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame. starter clutch and came chain $15 coils one good one bad $10 3 slave cylinders forgot which one is good $20 for all 3 Oiler line from block to head with bolts $10 shifter shaft $15 clipons with 3 extra bars which are bent $20 2 sets of pistons $15 clutch drum and shift forks $25 sprocket cover $10 inside rear tail peices $10 rear master cylinder and brake line $40 passinger rear sets $20 right side rear set $25 front axle with spacer $10 clutch master cylinder $20 turn signal switchs i have 2 of them neither highbeam switch works $20 a piece throttle cable housing $10 radiator fan $20 oil pan with bolts $ 25 mirrors $40 gas tank with fuel valve and sending unit no gas cap $50[/B] [B]Email for pictures. thanks dan[/B][/QUOTE] hello,just registered when i saw your post.I am looking for the following parts for my 1996 yamaha yzf1000 thunderace.Do you still have the pearl white rear seat cowl,the black plastic piece which surrounds the instrument panel(the piece you are looking at when seated on the bike,i believe some of the side cowl bolt into it), a right front brake lever,a right mirror(mine has minor scratches in it from a driveway tip over),and the right side cowl(mine is the one that is fully red,also having scratches).What are the prices and condition of the items you may have?any pictures can be sent to my email [EMAIL="kevinccummings@live.com"]kevinccummings@live.com[/EMAIL] will you also send to newfoundland,canada a2h 6y8 can pay paypal or visa, i am not sure if you are the same guy i bought the red and white right side cowl off of ebay last year,thanks |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 Hi... Need complete Thunderace engine - do you have that? Thanks... Replay to [email]czarsmith@aol.com[/email] |
Re: 97 yamaha yzf1000 thunderace parts yzf 1000 I am interested in many of your parts if you still have them. Sooner the better |
All times are GMT -4. The time now is 10:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands