Castle/lock nut socket help.
 

Does anyone know if a castle socket for a cbr600 will fit a 636? Or if any others are compatable with the 636? This is the socket used for swingarm and motor mount lock nuts.
I can't find one for a zx636 on ebay. All can find are suzuki and honda ones. The one I did find for a kawi was 60 bucks + shipping and it wasn't ebay. The ones I found on ebay (for the hondas and suzukis) are only 35 + shipping.
Thanks.

Re: Castle/lock nut socket help.
 

hammer and a punch always worked for me

Re: Castle/lock nut socket help.
 

yes sir hammer and screw driver. or notching a socket with a dremel

Re: Castle/lock nut socket help.
 

I've tried the hammer and flat head approach. The swingarm nut won't budge. I've fucked it up so bad I'm worried the socket may not work.

Re: Castle/lock nut socket help.
 

a flat head screw driver isn't the best way cause the shock of the hammer gets lost in the handle a good punch works best for me