Ryan Moore's Latest 450 Build!! Check it out, I just finished up a fresh build for the 08 season. The bike is off the hook, makes my old one feel like a clunker. Thanks to all my sponsorns for the help gettin this one built, or course ESD manufacturing/50stunt.com QTM for the tubless, spokless Marchesini Rims Motomaster Brakes for the fresh 320mm supermoto front brake system Trailtech for the lighting coil and flywheel to run my fans up front Braking for the new supermoto rear caliper ( I finally have a handbrake that works because of it!!!! ) Independent Suspension for the front suspension revalving And Eric at Temp Media for the crazy body wrap graphics!! And thanks to everyone rocking my parts on thier bikes, cuz without your support, I'de be riding a desk chair in a cubicle somewere!! [IMG]http://esd-mfg.com/08_450_pics/DSC02753.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02776.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02777.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02778.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02779.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02782.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02784.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02785.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02786.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02787.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02788.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02789.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02792.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02794.JPG[/IMG] |
Re: Ryan Moore's Latest 450 Build!! I sweating that thing so much... I am just itching to pick up a 450. Nice build Ryan! -Aaron |
Re: Ryan Moore's Latest 450 Build!! Looks good |
Re: Ryan Moore's Latest 450 Build!! hey you trying to copy the rims i got. i thought i was the only pimp stunting those bad boys. LOL. that bike looks mad sick. i am mad jealous. i can tell business is good. thanks for your products playa. i still would like for you to build me a 12 o clock bar and stuff. i am down when you are playa. |
Re: Ryan Moore's Latest 450 Build!! whats your problem ryan? you keep turning out the the best bikes ever!!!!!!! that thing rocks:YEAH :YEAH :YEAH |
Re: Ryan Moore's Latest 450 Build!! [quote=Aaron Colton;3246766]I sweating that thing so much... I am just itching to pick up a 450. Nice build Ryan! -Aaron[/quote] I am sweating |
Re: Ryan Moore's Latest 450 Build!! how much to build me one?:LOL |
Re: Ryan Moore's Latest 450 Build!! [quote=banjaxed;3246998]how much to build me one?:LOL[/quote] I might have to sell that one to get my knee fixed :banghead I am plannin on producing some supermoto parts soon, since its getting more popular. I wanna make a subframe that uses the plastic though. |
Re: Ryan Moore's Latest 450 Build!! Looks nice dude! love the rims does the flywheel weight help smooth out the bottom end at all? |
Re: Ryan Moore's Latest 450 Build!! [quote=el sammo;3248275]Looks nice dude! love the rims does the flywheel weight help smooth out the bottom end at all?[/quote] yeah, I love the heavy flyweel, it lugs down a little better so I don't have to turn the idle up. |
Re: Ryan Moore's Latest 450 Build!! That bike is out of control, I love the attention to detail. I wish my 02 was that flawless. Post more pics, the before and after 08 season. |
Re: Ryan Moore's Latest 450 Build!! your shits always setup and nice handbreak resivoir 2 :LOL |
Re: Ryan Moore's Latest 450 Build!! i am drooling. dude sell me your old bike. i'll trade you my rmz 450 |
Re: Ryan Moore's Latest 450 Build!! shit is SICK... |
Re: Ryan Moore's Latest 450 Build!! how did you get that finish on the fork tubes and your rear pegs? |
Re: Ryan Moore's Latest 450 Build!! wow dats a sick bike.... dats a good look in 08.... Hey Ryan how much can i get a set of those axle sliders front and rear for a 05-06 600rr shipped to ny 11385? |
Re: Ryan Moore's Latest 450 Build!! [QUOTE=Ryan Moore;3248289]yeah, I love the heavy flyweel, it lugs down a little better so I don't have to turn the idle up.[/QUOTE] are you serious!? my ktm stalls wayy early... if i buy a heavier flywheel? could that help that other than that THAT BIKE IS SICK! rims are freshhhhh |
Re: Ryan Moore's Latest 450 Build!! [quote=kaiks;3251928]are you serious!? my ktm stalls wayy early... if i buy a heavier flywheel? could that help that other than that THAT BIKE IS SICK! rims are freshhhhh[/quote] Yeah bro, it should help alot, I can lug mine down now, its alot harder to stall it. I put a +13oz on there from [URL]http://trailtech.net/[/URL][URL="http://www.trailtech.com"][/URL]. |
Re: Ryan Moore's Latest 450 Build!! I love the bike; nice pics! |
Re: Ryan Moore's Latest 450 Build!! I want a flywheel for my RMZ 450. any idea guys???? |
Re: Ryan Moore's Latest 450 Build!! love the bike man it looks sick!:YEAH |
Re: Ryan Moore's Latest 450 Build!! 1 Attachment(s) Hey, I'll trade you my wife for the bike......She's a supermodel.. |
Re: Ryan Moore's Latest 450 Build!! [quote=pimp1723;3259899]Hey, I'll trade you my wife for the bike......She's a supermodel..[/quote] :LOL OUCH! |
Re: Ryan Moore's Latest 450 Build!! [quote=pimp1723;3259899]Hey, I'll trade you my wife for the bike......She's a supermodel..[/quote] Damm, you better take her ass to burger king!! Quit spendin all your scratch on bikes and feed that female, lOL. |
Re: Ryan Moore's Latest 450 Build!! 2 questions: How much for a pair of those rear sets? Did you ever have to upgrade your rear spring due to the constant weight on the rear. I've adjusted my shocks but they eventually wear down. I'm considering a 6.1 or 6.7 spring. Suggestions/ideas. |
Re: Ryan Moore's Latest 450 Build!! how did I miss this thread. Looks good Ryan. Can I get some new passenger peg brackets for the KTM without the skeletonizing done to them?? no pegs, just the v shaped brackets but solid?? Every time I lay it down it mangles the brackets since I got my subframe so beefed up! Even from me just standing on them they will bend in towards eachother... Your new bike looks pimp bro, no more Aprilia? Thanks as always...:cheers |
Re: Ryan Moore's Latest 450 Build!! [QUOTE=jstuntlocke;3285742]how did I miss this thread. Looks good Ryan. Can I get some new passenger peg brackets for the KTM without the skeletonizing done to them?? no pegs, just the v shaped brackets but solid?? Every time I lay it down it mangles the brackets since I got my subframe so beefed up! Even from me just standing on them they will bend in towards eachother... Your new bike looks pimp bro, no more Aprilia? Thanks as always...:cheers[/QUOTE] the bending in inwards is due to the frames support because mines is hard as nails.. how been LOCKE! |
Re: Ryan Moore's Latest 450 Build!! [quote=kaiks;3286365]the bending in inwards is due to the frames support because mines is hard as nails.. how been LOCKE![/quote] :hello not bad bro! 'N you? yea, that's funny cuz your'e probably heavier than me too! I dunno man, I'm pretty hard on stuff tho... I just busted my K6 frame where my FI cage bolts up to the motor mount! LOL I'll take my idle with a side of pancakes! :LOL It folded back and cracked my frame, 3rd crash!!! Gaaabage I tell ya! I'm gonna get the esd pegs for my stock passenger pegs at the very least since they are too slickery as well, but I think I'm going to try to make a subbycage out of the FI cage loop material also since it's trash now. In the meantime, I'm tossing around the idea of sellin the Katoom or I'll be back to just tossin around the Katoom period while the K6 is down, so I would like to be back to two rear pegs at least!! Lemme know Ryan... I'll need to get a copy of that DVD finally also....:cheers B good Kaiks! |
Re: Ryan Moore's Latest 450 Build!! [quote=jstuntlocke;3285742]how did I miss this thread. Looks good Ryan. Can I get some new passenger peg brackets for the KTM without the skeletonizing done to them?? no pegs, just the v shaped brackets but solid?? Every time I lay it down it mangles the brackets since I got my subframe so beefed up! Even from me just standing on them they will bend in towards eachother... Your new bike looks pimp bro, no more Aprilia? Thanks as always...:cheers[/quote] I don't have any without the pockets cut into them, I can't beleive you bent them!!! Mine are rock solid still. You should its not flex in the actuall subframe you mounted them to, there is a reason I used 1 inch .120 wall chromoly tubing on mine, no flex. |
Re: Ryan Moore's Latest 450 Build!! [quote=Ryan Moore;3293154]I don't have any without the pockets cut into them, I can't beleive you bent them!!! Mine are rock solid still. You should its not flex in the actuall subframe you mounted them to, there is a reason I used 1 inch .120 wall chromoly tubing on mine, no flex.[/quote] Bummer... I'll post up some pics or email them to you if you want... don't ask me, but I think my subframe is actually TOO stiff?? I even fixed one by welding some of the pockets solid and grinding it back down, and then it bent on the first drifting spill! It's still busted! They are bending and tearing at the first pocket....:banghead |
Re: Ryan Moore's Latest 450 Build!! Damn, that bike is badass! :apimp |
Re: Ryan Moore's Latest 450 Build!! Nice bike... Ryan check your e-mail cause I e-mailed you ESD one. |
Re: Ryan Moore's Latest 450 Build!! [QUOTE=Ryan Moore;3252399]Yeah bro, it should help alot, I can lug mine down now, its alot harder to stall it. I put a +13oz on there from [URL]http://trailtech.net/[/URL][URL="http://www.trailtech.com"][/URL].[/QUOTE] sweet thanks a lot dude |
Re: Ryan Moore's Latest 450 Build!! :YEAH [quote=Ryan Moore;3246753]Check it out, I just finished up a fresh build for the 08 season. The bike is off the hook, makes my old one feel like a clunker. Thanks to all my sponsorns for the help gettin this one built, or course ESD manufacturing/50stunt.com QTM for the tubless, spokless Marchesini Rims Motomaster Brakes for the fresh 320mm supermoto front brake system Trailtech for the lighting coil and flywheel to run my fans up front Braking for the new supermoto rear caliper ( I finally have a handbrake that works because of it!!!! ) Independent Suspension for the front suspension revalving And Eric at Temp Media for the crazy body wrap graphics!! And thanks to everyone rocking my parts on thier bikes, cuz without your support, I'de be riding a desk chair in a cubicle somewere!! [IMG]http://esd-mfg.com/08_450_pics/DSC02753.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02776.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02777.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02778.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02779.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02782.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02784.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02785.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02786.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02787.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02788.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02789.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02792.JPG[/IMG] [IMG]http://esd-mfg.com/08_450_pics/DSC02794.JPG[/IMG][/quote] |
Re: Ryan Moore's Latest 450 Build!! how much |
Re: Ryan Moore's Latest 450 Build!! what clutch lever are you using? |
Re: Ryan Moore's Latest 450 Build!! Looks like a MSR raptor EZ pull to me? :shruggs Just a couple days away from ordering up those pimpin ESD rearsets for my big bike Ryan!! :YEAH |
Re: Ryan Moore's Latest 450 Build!! b e a utiful |
Re: Ryan Moore's Latest 450 Build!! :banghead :banghead :banghead shit like this makes me almost regret buyin a 6durty6. Shits pimp tho man just an awsome bike. You got any stunt parts for a 150F or maybe even the R for that matter? 230F? I see some of the 150/230 F's goin for pretty damn cheap...makes me think theyre a better deal than a fiddy. |
Re: Ryan Moore's Latest 450 Build!! that bike is every super moto stunters wet dream! Ryan you should start selling those custom sub frames and making some cash!! no one else makes em!, I know 3 people (including myself) that would buy one! I cry myself to sleep every night not having one of those subframes, lol.. seriously I do... want one bad enough to cry! |
All times are GMT -4. The time now is 07:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands