Best 636 Handbrake i need advice on the best 06 636 handbrake set up to get and were to get it. and also i would like to know who likes the dual caliper better. |
Re: Best 636 Handbrake That's not really something you gotta make a post for considering there's a load of them...next time use the search. Brembo and there's no bad sides of the dual caliper other then spending the extra cash. |
Re: Best 636 Handbrake [quote=JAYS-ON-ONE;3393625]i need advice on the best 06 636 handbrake set up to get and were to get it. and also i would like to know who likes the dual caliper better.[/quote] check out "hohey designs" [URL]http://www.hoheydesigns.com/kawasaki/0507636.html[/URL] |
Re: Best 636 Handbrake or there's 905 who sells a full kit. for $310 [URL]http://secure1.netbilling.com/cs/store.cgi?sid=14915&merchant_id=racing905&store_id=644&pid=30623&act=product_detail[/URL] |
Re: Best 636 Handbrake :banghead :banghead :banghead |
Re: Best 636 Handbrake ok for the dual caliper i would need to get another caliper is it the same as the stock rear?:shruggs |
Re: Best 636 Handbrake [IMG]http://hoheydesigns.com/kawasaki/images/A%5B1%5D.jpg[/IMG] You will need a 4 piston caliper from any Honda F4/F4i/929/954,6RR, few others work too. But thats a good thing, Tokico brakes are miserable. |
Re: Best 636 Handbrake [quote=Nick Apex;3398871][IMG]http://hoheydesigns.com/kawasaki/images/A%5B1%5D.jpg[/IMG] You will need a 4 piston caliper from any Honda F4/F4i/929/954,6RR, few others work too. But thats a good thing, Tokico brakes are miserable.[/quote] correct me if I am wrong but I only see a two piston caliper in that picture.. |
Re: Best 636 Handbrake [QUOTE=imafrogg420;3398874]correct me if I am wrong but I only see a two piston caliper in that picture..[/QUOTE] thats a 4 piston, 2 pistons on each side squeezing in. |
Re: Best 636 Handbrake [quote=sdfkillz;3398876]thats a 4 piston, 2 pistons on each side squeezing in.[/quote] kk thats what I was kind of thinking thanks for the clearification |
Re: Best 636 Handbrake ho hey 4 piston with a brembo 16 18 is the shit nothing better ..... |
Re: Best 636 Handbrake ok so the hohey dual caliper set up will fit a honda 4 piston caliper in it no prob for a 636 or is there something else that is needed |
Re: Best 636 Handbrake [QUOTE=JAYS-ON-ONE;3400539]ok so the hohey dual caliper set up will fit a honda 4 piston caliper in it no prob for a 636 or is there something else that is needed[/QUOTE] you need this [url]http://www.hoheydesigns.com/kawasaki/0507636.html[/url] 4 Piston adapter bracket COMBO You get adapter bracket, dual caliper bracket and extended steel braided brake line $249.00 |
Re: Best 636 Handbrake Hey Nick Is That Caliper Off Of The Front Of A Honda? |
Re: Best 636 Handbrake [QUOTE=JAYS-ON-ONE;3400554]Hey Nick Is That Caliper Off Of The Front Of A Honda?[/QUOTE] yes the right front honda caliper is what you will need also :cheers |
Re: Best 636 Handbrake I Just Checked Out Hohey And It Says You Gotta Trim The Pads. Is That Hard? And How Do You Do It |
Re: Best 636 Handbrake [QUOTE=JAYS-ON-ONE;3400559]I Just Checked Out Hohey And It Says You Gotta Trim The Pads. Is That Hard? And How Do You Do It[/QUOTE] its easy ride for a week then take the pads out and trim the part off that is not touching the rotor either with a dremel or a grinder |
Re: Best 636 Handbrake THANKS FOR THE HELP DURTY:cheers |
Re: Best 636 Handbrake [QUOTE=JAYS-ON-ONE;3400565]THANKS FOR THE HELP DURTY:cheers[/QUOTE] no problem :hello |
All times are GMT -4. The time now is 11:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands