06 r6 wont start and code 19
 

Ok I have a 06 r6 that wont start now. Its popping up as code 19 and i get a fuel pump and everything but when I hit the starter button nothing at all happens. when I jump it over theres not even any spark. I cant figure it out.
Has this happend to anyone on here?

Re: 06 r6 wont start and code 19
 

Have you checked for continuity on the clutch, neutral and kickstand safety switches? Have you checked the bank angle sensor? Get a wiring schematic because this can be a problem caused by multiple different things. Check on the R6 forums, I'm sure people have posted different fixes they've used for the same problem. Goodluck!

Re: 06 r6 wont start and code 19
 

just trowing it out there idk if it will help but worth a shot have u dropped the bike? If so there is a micro swith on the gsxr under the cluth lever it's not all the way in the bike wont start like i said idk if they have them or not just figure i'd tell u to check?

Re: 06 r6 wont start and code 19
 

[QUOTE=1nastydc2;4220320]just trowing it out there idk if it will help but worth a shot have u dropped the bike? If so there is a micro swith on the gsxr under the cluth lever it's not all the way in the bike wont start like i said idk if they have them or not just figure i'd tell u to check?[/QUOTE]

Thats the clutch safety switch.

Re: 06 r6 wont start and code 19
 

19? check the wires that come from your coil packs (2 from each ). i bet one of them is frayed, or the fan cut through one.

Re: 06 r6 wont start and code 19
 

[quote=T-NECK;4220367]19? check the wires that come from your coil packs (2 from each ). i bet one of them is frayed, or the fan cut through one.[/quote]

I looked at that and because I was reading on the forums going back and froth trying to figure this out and It was not that.

I now have found a 4 pin connector on the right side of the bike under the gas tanks right next to the side of the frame on the right. It has a pink/black, light green/something. I just have no Idea there is nothing for it to hook up to or anything I've looked everywhere.

Re: 06 r6 wont start and code 19
 

[QUOTE=05rrstunting;4220449]I looked at that and because I was reading on the forums going back and froth trying to figure this out and It was not that.

I now have found a 4 pin connector on the right side of the bike under the gas tanks right next to the side of the frame on the right. It has a pink/black, light green/something. I just have no Idea there is nothing for it to hook up to or anything I've looked everywhere.[/QUOTE]

Download a wiring schematic!!!

Re: 06 r6 wont start and code 19
 

Here man download the service manual it may be of some use to you. [url]http://www.r6messagenet.com/forums/r6-maintenance-technical/39254-r6-service-maintenance-repair-manual.html[/url]

I can't remember what the error 19 is on the 06+. Could be like T-neck said and or it could be something like the side stand switch. Just check out the manual it will have all of that in there.

Re: 06 r6 wont start and code 19
 

Code 19:
Symptom: Open circuit in the input line of ECU No4 terminal is detected when the start switch is pressed.

Re: 06 r6 wont start and code 19
 

It had a power commander in it and now they took it when I bought the bike.. Could this have anything to do with it?