Ryan Moore's Latest 450 Build!!
#61
Re: Ryan Moore's Latest 450 Build!!
yo ryan!
where can i buy this rear brake kit of youres?
the one that you have on youre new bike!
http://esd-mfg.com/08_450_pics/DSC02786.JPG
where can i buy this rear brake kit of youres?
the one that you have on youre new bike!
http://esd-mfg.com/08_450_pics/DSC02786.JPG
#62
Re: Ryan Moore's Latest 450 Build!!
yo ryan!
where can i buy this rear brake kit of youres?
the one that you have on youre new bike!
http://esd-mfg.com/08_450_pics/DSC02786.JPG
where can i buy this rear brake kit of youres?
the one that you have on youre new bike!
http://esd-mfg.com/08_450_pics/DSC02786.JPG
#63
Re: Ryan Moore's Latest 450 Build!!
i think its just a 13mm nissan master but to get it to work well you need a larger 'braking' caliper
ask him over at his own fourm
http://www.supermotojunkie.com/forumdisplay.php?f=81
ask him over at his own fourm
http://www.supermotojunkie.com/forumdisplay.php?f=81
#64
Re: Ryan Moore's Latest 450 Build!!
yeah, that wont work on your stock caliper, Ryan is running a larger aftermarket rear caliper. You need a 9.5mm or 9mm clutch master from a KTM with a tap to your foot master, or a dual caliper bracket.
#65
Re: Ryan Moore's Latest 450 Build!!
that I could get a hold of on ebay or something.
can you make a complete list of the stuff I need and maby som links? would be grate!!!!
#66
Re: Ryan Moore's Latest 450 Build!!
Look at : http://www.fullthrottleinc.net they have brake kits!
#67
Re: Ryan Moore's Latest 450 Build!!
Fluffy, for your bike (Im assuming your KTM), here is your best way to go (as long as your bike is 03-07)...
http://www.hoheydesigns.com/ktm/
Otherwise you may have to go with this....
https://ssl4.westserver.net/rekluse....75f2eaae3d04ab
as far as I know, full throttle's motard handbrakes are still out of stock for a while.
I think ryans handbrake stuff he's gonna have may be for just crf's right now.
http://www.hoheydesigns.com/ktm/
Otherwise you may have to go with this....
https://ssl4.westserver.net/rekluse....75f2eaae3d04ab
as far as I know, full throttle's motard handbrakes are still out of stock for a while.
I think ryans handbrake stuff he's gonna have may be for just crf's right now.
Last edited by 12oclocker; 11-17-2008 at 12:49 PM.
#68
Re: Ryan Moore's Latest 450 Build!!
hey ryan what size wheels do you have on your new bike? 3.50x 16.5 or the 17s front and the rear 4.25 or 5 inch wide 17s i got a crf also and im thinking about buying some forged instead of spokes ,just dont know what size is good or if they are good as the spokes, thank you......
Check it out, I just finished up a fresh build for the 08 season. The bike is off the hook, makes my old one feel like a clunker. Thanks to all my sponsorns for the help gettin this one built,
or course
ESD manufacturing/50stunt.com
QTM for the tubless, spokless Marchesini Rims
Motomaster Brakes for the fresh 320mm supermoto front brake system
Trailtech for the lighting coil and flywheel to run my fans up front
Braking for the new supermoto rear caliper ( I finally have a handbrake that works because of it!!!! )
Independent Suspension for the front suspension revalving
And Eric at Temp Media for the crazy body wrap graphics!!
And thanks to everyone rocking my parts on thier bikes, cuz without your support, I'de be riding a desk chair in a cubicle somewere!!
or course
ESD manufacturing/50stunt.com
QTM for the tubless, spokless Marchesini Rims
Motomaster Brakes for the fresh 320mm supermoto front brake system
Trailtech for the lighting coil and flywheel to run my fans up front
Braking for the new supermoto rear caliper ( I finally have a handbrake that works because of it!!!! )
Independent Suspension for the front suspension revalving
And Eric at Temp Media for the crazy body wrap graphics!!
And thanks to everyone rocking my parts on thier bikes, cuz without your support, I'de be riding a desk chair in a cubicle somewere!!
#69
Re: Ryan Moore's Latest 450 Build!!
hey ryan what size wheels do you have on your new bike? 3.50x 16.5 or the 17s front and the rear 4.25 or 5 inch wide 17s i got a crf also and im thinking about buying some forged instead of spokes ,just dont know what size is good or if they are good as the spokes, thank you......
#70
Re: Ryan Moore's Latest 450 Build!!
I have 17's front and rear 5 inch in the back. My spoked wheels are way stonger, I bent those marchis first time on a set of steps, defenitly not as strong, and double the price. I can get you some DNA's for $799, and wrap them with 2 sets of skins for less than the cost of the forged wheels.
thanks Ryan for the info,i really appreciate , yea i just bought the marchesinis, i tough about what you were saying and almost went back with the spokes , but im just going to do ccs road race on that bike so i really need something light , anyways thanks again .... oh yea do you sell those pegs sliders that's on you bike at the shop? and how much???
#72
Re: Ryan Moore's Latest 450 Build!!
Hey Ryan with you expanding on the supermoto and stunt parts through 50stunt.com, are there any planns to do more for KTM? I have an 07 KTM 450 EXC and I need a new Subframe and rear peg set BAD!!!
LOVE your new CR... why did I get a Katoom and not another CR... why?
LOVE your new CR... why did I get a Katoom and not another CR... why?
Thread
Thread Starter
Forum
Replies
Last Post