My r6 rebuild finally done!!
05-19-2010, 08:53 PM
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: NY/Bmore
Posts: 6,794
My r6 rebuild finally done!!
My r6 rebuild finally done!!
After 5 months of headaches putting this thing back together it is finally finished!! Well almost, still need some tank grip and some new fat pegs..
Setup as follows
05 r6
Atown customs cage
OMR subcage
C4 12 bar and fairing stay
C4 tank dent and lip welded on
636 flipped clip ons
Magura 13mm 195 master
Hohey big rotor kit with 4 piston
GPR stabilzer
PMP +4 sprocket
FMF factory shorty exhaust
PC3 needs to be tuned still
Seats rewrapped for my first time ever having a foot hole in my seat
All new black plastics, was blue aaaand thats about it I think...
After 5 months of headaches putting this thing back together it is finally finished!! Well almost, still need some tank grip and some new fat pegs..
Setup as follows
05 r6
Atown customs cage
OMR subcage
C4 12 bar and fairing stay
C4 tank dent and lip welded on
636 flipped clip ons
Magura 13mm 195 master
Hohey big rotor kit with 4 piston
GPR stabilzer
PMP +4 sprocket
FMF factory shorty exhaust
PC3 needs to be tuned still
Seats rewrapped for my first time ever having a foot hole in my seat
All new black plastics, was blue aaaand thats about it I think...
Last edited by sdfkillz; 05-19-2010 at 09:03 PM.
except for the wheel tape
05-19-2010, 09:16 PM
#4
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: My r6 rebuild finally done!!
i seen in the other thread some one mentioned moving your exhaust clamp to uncover the logo on your can , i just put the exhaust bracket where it is so it would work with the stock exhaust but if you want it cut off and weld it on some where else thats not a problem or you might be able to get away with just cutting the exhaust bracket shorter and drilling a new hole further down the bracket ..
05-19-2010, 09:19 PM
#5
Registered User
Thread Starter
Join Date: Apr 2005
Location: NY/Bmore
Posts: 6,794
Re: My r6 rebuild finally done!!
i seen in the other thread some one mentioned moving your exhaust clamp to uncover the logo on your can , i just put the exhaust bracket where it is so it would work with the stock exhaust but if you want it cut off and weld it on some where else thats not a problem or you might be able to get away with just cutting the exhaust bracket shorter and drilling a new hole further down the bracket ..
05-19-2010, 09:21 PM
#6
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
05-19-2010, 09:22 PM
#7
Registered User
Thread Starter
Join Date: Apr 2005
Location: NY/Bmore
Posts: 6,794
05-20-2010, 12:23 AM
#9
part time Porn Star
Join Date: Sep 2008
Location: streets of MurderLAND
Age: 41
Posts: 2,075
Re: My r6 rebuild finally done!!
Bikes weak sauce... Who stunts a 05 R6 anyways bwbwbwbw ...... I'm gonna look into that spot that guy on the f4i was talkin about and see what's up with that... I'd like to get out friday and saturday... That's if ur oldness can handle it... Ill holla... And OMR I got the subcage in... Looks great thanks
05-20-2010, 12:24 AM
#10
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: My r6 rebuild finally done!!
Bikes weak sauce... Who stunts a 05 R6 anyways bwbwbwbw ...... I'm gonna look into that spot that guy on the f4i was talkin about and see what's up with that... I'd like to get out friday and saturday... That's if ur oldness can handle it... Ill holla... And OMR I got the subcage in... Looks great thanks
thanks tell your friends 
05-20-2010, 02:14 PM
#19
Registered User
Thread Starter
Join Date: Apr 2005
Location: NY/Bmore
Posts: 6,794
05-20-2010, 02:28 PM
#20
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
