Fairing Company Review
#1
Fairing Company Review
Im not spamming, just trying to help some people out:
So i just ordered a set of fairings from delkevic and they seem to be working pretty good. They all seem to fit nicely and everything comes pre drilled. The plastic is not to brittle but not too soft. Near OEM thickness and quality. the kit came with the tail, sides, front fender, upper, inner ram air covers, and the V that directs air to the radiator.
The only issues i have is that the sides that came with the kit for an f4 have holes drilled in the side in locations that i cant figure out why ( different mounting points on each side for frame sliders probably). Also there are seams ecspecially around the edges that are popped up from the injection molding i assume. it reminds me of reusable plastic cups that are injection molded.
Overall I recommend them to anyone who needs a set of fairings for a cheap price and can paint and sand themselves. You cant go wrong for less than 4 bills. In addition to the decent fairings there customer services seems to be top notch. Just asked a question and hour ago got a response already
Ill post some pictures tomorrow when the sun is out.
http://www.delkevic.us/
So i just ordered a set of fairings from delkevic and they seem to be working pretty good. They all seem to fit nicely and everything comes pre drilled. The plastic is not to brittle but not too soft. Near OEM thickness and quality. the kit came with the tail, sides, front fender, upper, inner ram air covers, and the V that directs air to the radiator.
The only issues i have is that the sides that came with the kit for an f4 have holes drilled in the side in locations that i cant figure out why ( different mounting points on each side for frame sliders probably). Also there are seams ecspecially around the edges that are popped up from the injection molding i assume. it reminds me of reusable plastic cups that are injection molded.
Overall I recommend them to anyone who needs a set of fairings for a cheap price and can paint and sand themselves. You cant go wrong for less than 4 bills. In addition to the decent fairings there customer services seems to be top notch. Just asked a question and hour ago got a response already
Ill post some pictures tomorrow when the sun is out.
http://www.delkevic.us/
Last edited by B0arder606; 01-04-2010 at 06:47 PM.
#4
Re: Fairing Company Review
Ya I ordered a pair For my 636 a week ago they should be at the crib today or tomorrow. I hope everything works out. Customer service and quick shipping has been good so far. I heard nothing but good things
#5
Naarden Bike Super Store
Join Date: Feb 2006
Location: WWW.NAARDEN.BIZ ~ Sportbike Super Store
Posts: 1,992
Re: Fairing Company Review
thats a pretty smoking deal on stuff, any one else have good experience with them and the body work? and did they beat you down on shipping like the rest of the companys do?
#7
#13
Re: Fairing Company Review
#14
Re: Fairing Company Review
the 03/04 r6 and the 06+ r6s is the same bike. The 05 just had inverted forks. other than that, the bodywork is the same except the front fender(the one that mounts to the forks). the 06 r6(also called r6r) is totally different
#15
Re: Fairing Company Review
Im not spamming, just trying to help some people out:
So i just ordered a set of fairings from delkevic and they seem to be working pretty good. They all seem to fit nicely and everything comes pre drilled. The plastic is not to brittle but not too soft. Near OEM thickness and quality. the kit came with the tail, sides, front fender, upper, inner ram air covers, and the V that directs air to the radiator.
The only issues i have is that the sides that came with the kit for an f4 have holes drilled in the side in locations that i cant figure out why ( different mounting points on each side for frame sliders probably). Also there are seams ecspecially around the edges that are popped up from the injection molding i assume. it reminds me of reusable plastic cups that are injection molded.
Overall I recommend them to anyone who needs a set of fairings for a cheap price and can paint and sand themselves. You cant go wrong for less than 4 bills. In addition to the decent fairings there customer services seems to be top notch. Just asked a question and hour ago got a response already
Ill post some pictures tomorrow when the sun is out.
http://www.delkevic.us/
So i just ordered a set of fairings from delkevic and they seem to be working pretty good. They all seem to fit nicely and everything comes pre drilled. The plastic is not to brittle but not too soft. Near OEM thickness and quality. the kit came with the tail, sides, front fender, upper, inner ram air covers, and the V that directs air to the radiator.
The only issues i have is that the sides that came with the kit for an f4 have holes drilled in the side in locations that i cant figure out why ( different mounting points on each side for frame sliders probably). Also there are seams ecspecially around the edges that are popped up from the injection molding i assume. it reminds me of reusable plastic cups that are injection molded.
Overall I recommend them to anyone who needs a set of fairings for a cheap price and can paint and sand themselves. You cant go wrong for less than 4 bills. In addition to the decent fairings there customer services seems to be top notch. Just asked a question and hour ago got a response already
Ill post some pictures tomorrow when the sun is out.
http://www.delkevic.us/
+1000000
I had cracked front upper on my 2006 honda CBR 600RR and I looked on ebay for months to replace my cracked upper. After passing on tons of over priced bull **** ones I would have to sand and paint I found delkevic.. I ordered thru them with ZERO problems, great shipping time and product came clean and rdy to paint! I painted my upper that day after scuffing it up and and fit perfect to my stock OEM side fairings and air intake fit perfect inside delkevic upper! I will buy more plastics from them again im sure! Also they have sales and atm they were selling (Honda CBR600RR 03 04 Repsol CBR 600 pr1356 Body kit) 175 bucks for full set... cant go wrong.
mcparts4u
Thats the Ebay name I use to buy my ****.. I hope this helps...
JonD
#16
Naarden Bike Super Store
Join Date: Feb 2006
Location: WWW.NAARDEN.BIZ ~ Sportbike Super Store
Posts: 1,992
Re: Fairing Company Review
actually 05 lower fairings are a little different front the rest, still fits the same but they are definitely different
#17
Re: Fairing Company Review
+1000000
I had cracked front upper on my 2006 honda CBR 600RR and I looked on ebay for months to replace my cracked upper. After passing on tons of over priced bull **** ones I would have to sand and paint I found delkevic.. I ordered thru them with ZERO problems, great shipping time and product came clean and rdy to paint! I painted my upper that day after scuffing it up and and fit perfect to my stock OEM side fairings and air intake fit perfect inside delkevic upper! I will buy more plastics from them again im sure! Also they have sales and atm they were selling (Honda CBR600RR 03 04 Repsol CBR 600 pr1356 Body kit) 175 bucks for full set... cant go wrong.
mcparts4u
Thats the Ebay name I use to buy my ****.. I hope this helps...
JonD
I had cracked front upper on my 2006 honda CBR 600RR and I looked on ebay for months to replace my cracked upper. After passing on tons of over priced bull **** ones I would have to sand and paint I found delkevic.. I ordered thru them with ZERO problems, great shipping time and product came clean and rdy to paint! I painted my upper that day after scuffing it up and and fit perfect to my stock OEM side fairings and air intake fit perfect inside delkevic upper! I will buy more plastics from them again im sure! Also they have sales and atm they were selling (Honda CBR600RR 03 04 Repsol CBR 600 pr1356 Body kit) 175 bucks for full set... cant go wrong.
mcparts4u
Thats the Ebay name I use to buy my ****.. I hope this helps...
JonD
#18
Re: Fairing Company Review
thanks
#19
Re: Fairing Company Review
Damn man wish I had found a set like that for my 06 rr. Just picket up a slightly rashed set a week ago for a buck fifty, right mid is fugged up and some the one plastic bracket in the upper is broke... was still worth the 150 to me, but that set you posted up is a steal at 175. 03-04 and 05-06 cbr 600rr are not the same right?
03-04 is different than 05-06.. I would have bought that repaol plastics if they would have fit my 06!! lol
Projekt_Eden, you stunting your 600RR? or is it just a street bike.?