Dan_DGAF666

i have some spare thunderace parts laying around i need to sell.
Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping.
cylinder needs honed been sitting on self. $50 plus shipping.
cylinder with cam chain tensioner need honned been sitting on self $60
bottom fairing piece but NOT the V piece for the font $50 plus shipping.
solo rear seat fairing pearl white $150 plus shipping.
COMPLETE triple trees (no ignition) $55 plus shipping
taillight $10 plus shipping
left side inner fairing panel $20 plus shipping
start and on/off switch i have 2 of them $10 a piece
i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame.
starter clutch and came chain $15
coils one good one bad $10
3 slave cylinders forgot which one is good $20 for all 3
Oiler line from block to head with bolts $10
shifter shaft $15
clipons with 3 extra bars which are bent $20
2 sets of pistons $15
clutch drum and shift forks $25
sprocket cover $10
inside rear tail peices $10
rear master cylinder and brake line $40
passinger rear sets $20
right side rear set $25
front axle with spacer $10
clutch master cylinder $20
turn signal switchs i have 2 of them neither highbeam switch works $20 a piece
throttle cable housing $10
radiator fan $20
oil pan with bolts $ 25
mirrors $40
gas tank with fuel valve and sending unit no gas cap $50

Email for pictures. thanks dan

Dan_DGAF666

i also have a set of brand new chrome rims for this bike, they have not been mounted since they were chromed. email for pictures

starboynky

lord i thought i was the only guy that ever had one of those...still got mine under the house...lol pm me about those wheels lookn for some to put on my new r1

Dan_DGAF666

I still have many of the parts listed above, and are also parting out my complete 97 yzf1000 thunderace. swingarm is strecthed 6 inches polished frame, wheels, swingarm. still have those minty chrome wheels that have never been mounted. thanks dan

Dan_DGAF666

Bump

Dan_DGAF666

bump this **** is real cheap i need it gone. Dan

921Studio

I need a prices on the rims and any other chromed or polished parts with pics.. email me at admin at brokersgrass.com.

Dan_DGAF666

chrome rims and swingarm have been sold. still have a ton of parts let me know what you need. thanks Dan

Dan_DGAF666

i still have alot let from this bike and lots or spare parts.

bottom belly fairings. $50
i have 2 Good set of engine cases each comes with engine case bolts, cam chain guides, shifter shaft, oil pan with bolts, and some other pieces. (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 each plus shipping.
cylinder needs honed been sitting on self. $50 plus shipping.
cylinder with cam chain tensioner need honned been sitting on self $60
COMPLETE triple trees (no ignition) $55 plus shipping
taillight $10 plus shipping
left side inner fairing panel $20 plus shipping
start and on/off switch i have 2 of them $10 a piece
i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame.
Also have another frame with clean and clear title in my name and its also polished no damage to frame $600.
starter clutch and came chain $15
coils one good one bad $10
have a good set of coils for $40
airbox with K&N filter $20
3 slave cylinders forgot which one is good $20 for all 3
Oiler line from block to head with bolts $10
shifter shaft $15
2 sets of pistons $15
clutch drum and shift forks $20
sprocket cover $10
inside rear tail peices $10
rear master cylinder and brake line $40
passinger rear sets $20
right side rear set $25
front axle with spacer $10
clutch master cylinder $20
turn signal switchs i have 2 of them neither highbeam switch works $20 a piece
throttle cable housing $10
radiator fan $20
i have 2 gas tanks with fuel valve and sending unit no gas cap $50 each
speedo with 26002 miles for $99
headlight which has had 2 tabs repaired $75
have clutch master cylinder line and slave cylinder in working order $60
have complete clutch basket assembly for $75
complete transmission for $75
good set of connecting rods $30
rear shock $50
heli handlbars $75 one is very slighty tweaked, I never noticed when mounted on my bike.
buyer pays whatever the shipping cost are.
I have more parts not listed i just cant remmber what they are.

email for pictures and if you need something i dont have listed.

I am open to all offers. Thanks Dan

Yamaha412

ill be hitting you up soon, might be picking a wrecked one up

Dan_DGAF666

ok just let me know. Thanks Dan

n3zix

Two questions-
Have you tested the headlight hi/lo switch to see whats wrong with them? Or opened them up?
Also, do you have any seats? I didnt see any listed.
Thanks

Dan_DGAF666

the wire for the highbeam broke off its contact point, headlight still works fine, one is set up to run on a switch to turn headlight on or off.

i have aftermarket corbin front seat no rips $125 shipped Thanks Dan

svn9low

Hello sir, I am interested in the following. Can you provided pics, if you still have them?

1.inside rear tail peices $10
2.speedo with 26002 miles for $99 (is this the full cluster? & does it fully illuminate?)
3.heli handlbars $75 one is very slighty tweaked

Also, do you have the rear brake rotor?

feel free to email pics to svn9low@yahoo.com

Dan_DGAF666

pictures have been sent, yes its full cluster and lights up. dont have a rear brake rotor. Dan

Alex of Rossia

Hi there! Shock is still available? Is it in good shape w/o any leaks? How much miles on it? Could you send it overseas in to Russia? I'll pay with PayPal. All overseas charges you can check here http://pe.usps.com/text/Imm/ps_013.htm#ep1603920 i prefer USPS Express mail international/
Let me know if you interested, thanks

Dan_DGAF666

i have responed to your pm. thanks dan

Dan_DGAF666

wheels have been sold, i only have 1 rear wheel left for $50 needs to be painted. still have a good clear title frame $600, also have gauge cluster $75 and aftermarket corbin seat for $100. open to all offers. have many rear sets, starters, altenators, cylinders, engine cases. etc.. let me know what you need i probably have it, i just forgot to list it.Thanks Dan

GoBozo

Send me pics of the tanks and throttle housing. agardner@kelleydrye.com

Dan_DGAF666

pictures have been sent, also forgot to list i have 2 complete wires harness with all the electric boxes, both came from running bikes. also Have hindle header. Dan