1001091312a.jpg



1001091322.jpg

 

So all in all im just rippin her down to the frame and suspention.
cab mounts im cuttin off next thursday and then unbolting the tranny and motor and then thats coming out. then im getting a sandblaster and blasting it down then por 15 coating it.

now im shopping around for a 12v cummings motor. so i can put that damn thing in. do some suspention and break work. then mod in a f350 dash and steering coloum. racing seats. 08 ford center council. fix the floor pans. put her back together. and then paint then she will be all done for the most part. some odds and ends after that. (weatherstripping, electronic locks and windows. new wheels and tires and performance upgrades.

 

sweeetttt

 

i might come out of this with under 5 grand into it including the truck. my buddy has a 79 that needs a motor cuz his is hydrolocked. and he has a cummins for his dodge. (he doesnt know about diesels all that much, so he bought a 12v instead of a 24v for his 2004. So we might trade motors. im pretty stoked.

 

Yah so photobucket went all stupid on me. So heres the link to my album for the build. And how the hell do you edit posts >

http://s20.photobucket.com/albums/b2...mmins%20Build/

 

no post editing except for moderators... welcome to stuntlife...


but it was being abused pretty heavy back in the day DRAMA!

 

hmmm. maybe i should just have the tread deleted and start a new one.

 

Going to pick up my cummins motor tomorrow for 2 grand. only 48k miles out of a 96 dodge. with a updated p1700 fuel pump and fuel plate work and timing work
now i just gotta order my mounting kit. and find a dang 4x4 trans cuz I know that trans will not hold up to cummins haha. and its a redic amount for adapter plates. way over what i can just buy a used trans for.

 

picked up my motor today! WOOOOOOOOO

1012092205.jpg
1012092205a.jpg
1012092205b.jpg
1012092205c.jpg
1012092206.jpg

these motors are hugeeee. it dwarfs the powerstroke 7.3

 

thats blasphemy

 

how so

 

I know you are going to clean,paint and polish that biatcch before it goes in

 

already started. im postin pics in a lil bit. went out and got a **** ton of high temp paint. gotta get some more wire wheels tomorrow to do the tappet covers and the chrome parts of the turbo.

 

Took a few hours and started cleaning, degrease, and sanding **** down. Got some high temp. paint and a spray gun and started going at it. was just gunna do the exhaust manifold and turbo exhuast housing. but then i said screw it and might as well do the whole block.
Tomarrow I gotta go to browns before class and get a wire wheel for my drill. gunna polish up the end of the turbo. the top tappet covers. alternator, pumps, intake manifold, and some other vairous things. then gunna go get a gloss heat temp paint and gloss some other things just so its not all just flat black. should be sweet when its done.

I dont have much time tomorrow cuz i got work then class. but wends. im gunna finish up the rest of that side. the do the other majority of the front and the whole other side.

1013091939.jpg
1013091939a.jpg
1013091540.jpg
1013092121.jpg
1013092121a.jpg
1013092126.jpg
1013092127.jpg
1013092127a.jpg
1013092312.jpg
1013092312a.jpg

1013092313a.jpg
1013092322.jpg

God it looks a trillin times better already.

 

Did some more painting and cleaning today. just got a lil more scrubbing to do on the front below the oil fill. theres like a pound of burn access oil under there lol.
painted my turbo, intake manifold, and polished my alternator and a/c pump and tension pulley. umm cant seem to get my clutch fan off. have to find someone who has a tool for it :/
ohh well. oh and if anyone has a 4x4 trans that will work with my 96 motor that would be sweet to buy. Id prefer a manual but ill take an auto if its a good deal.

1014091557.jpg
1014091628.jpg
1014091712.jpg
1014091908.jpg
1014091909.jpg
1014091920.jpg

1014091953.jpg
1014092018.jpg
1014092022.jpg

 

Got up eairly this morning and finished the intake and tappet covers on top.
pry got about another hour left of work and the motor will be set.

im gunna try and get a few people over today so i can get the cab off of my truck.

then i can start taking out the motor.

1015091015.jpg

 

Did a quick job on the bottom of the bed.
took a wire wheel and did a quick undercoat.
its kinda a crappy job but it will do for a bit till i can fix up some rust sports and can save up some extra money for more por 15

1016091712.jpg

 

Got the cab off!!!
Wooo, and wow was it a damn nightmare.
it took 6 of us and it was still fricken heavy.

takin the motor out Tuesday.

heres some pix


1018091623.jpg
Jarret likes humpin my motor 4:1018091628.jpg
1018091630.jpg
1018091630a.jpg
1018091631.jpg
1018091631a.jpg
1018091631b.jpg
1018091631c.jpg
1018091631d.jpg
1018091632.jpg
1018091633.jpg
1018091634.jpg
1018091634a.jpg
1018091634b.jpg

 

Got my hood all high temp painted today.

Ohh yah and got the motor, trans, t-case, and driveshafts off :party018::party018:

my tear down is offically complete besides some interior peices and my brake system.:headbang:

the motor came out pretty easy. the tractor didnt like lifting summin that heavy tho. but other than that its all good.

I have thursday off work and class so ill pry spend it cleaning up the motor and trans to get ready to sell. hopefully my por-15 will be here by then so i can sand blast the frame and get it all coated.

1020091410.jpg
1020091410a.jpg
1020091654.jpg
1020091655.jpg
1020091729.jpg
1020091729a.jpg
1020091729b.jpg
1020091730.jpg
1020091729c.jpg

 

the diff is showing what a cash money hustler you are...