Someone has to know what this is... - Open Forum

snowpainter · 11-10-2007, 05:08 PM

I bought this bike at a garage sale thinking it would be a good starter bike for my daughter. :YEAH Now I am looking for a new carb and it has me feeling like an idiot because I have no clue what the hell it is

If anyone has an idea please let me know because it's kicking me in the nuts!

Motor has AR95-100737 stamped on it....google was no help!

old man roger · 11-10-2007, 05:14 PM

if you can't figure out what it is it looks just like a scooter motor any carb the same size should work take the carb off and go to a local shop that sells scooters and mopeds and just find one that looks like it will fit ......

the size of the intake port will be the deciding factor along with the style of the throttle cable

or just fix the carb thats on it

snowpainter · 11-10-2007, 05:19 PM

right on, any idea if one would be beefier than the other, or would it make little difference on such a small bike

snowpainter · 11-10-2007, 05:21 PM

right now the only adjustment is the throttle screw, it runs great for about 5 mins then bogs like it's flooded, may have just bought junk...

old man roger · 11-10-2007, 05:24 PM

have you checked to make sure there isn't crap in the tank ?

and if there is a petcock make sure it flows good......

old man roger · 11-10-2007, 05:25 PM

and i don't see a vent tube on the cap ,when it starts running crappy take off the cap and see if it doesn't start running better

snowpainter · 11-10-2007, 05:59 PM

you know your shit Roger! I took off that cap and it runs good but then it poors from the overflow and will probably end up setting my leg on fire...haha Jason was right though, your the man with the answers!!! THANKS

Kelm · 11-10-2007, 06:05 PM

Roger is like old but yet kick ass and cool with the answers.... kinda like,

old man roger · 11-10-2007, 06:06 PM

if it pours out the over flow your float is either to high or your needle and seat is not sealing properly if it's the needle and seat then there is probably just a peice of dirt or corrosion in there ....

the needle and seat is what lets the gas in the bowl and the float goes up when the bowl is full and that closes the needle and seat

snowpainter · 11-10-2007, 06:14 PM

here's a better pic of d carb. the red cap is what I took off.... Sounds like a new carb is the easiest way for a quick fix, it's not like they are an arm and a leg..haha

old man roger · 11-10-2007, 06:23 PM

i have never seen a carb like that in my life........lol

give cleaning it a try and if that works your good and if you fuck it up so what you were gonna buy a new one any ways......

snowpainter · 11-10-2007, 06:45 PM

Now you know what I mean about the kick in the nuts! It's not the fact that I am mechanicaly retarded, but I have never seen one either, what realy sucks is the fact that it's a 2stroke and it's self-mixing. lesson learned today.... "Impulsive buying can give you gas"

old man roger · 11-10-2007, 06:53 PM

aaaaaaaahhhhhhhhh that brings a whole new aspect to the subject......

put a new plug in it and block off the pump that mixes the oil and just pre mix it in the tank.....................40 parts gas and 1 part oil would be a good starting point as long as there is smoke coming out the tail pipe and you are not fouling plugs then you are good if there isn't smoke add more oil if it fouls the plug quick then less oil..........

snowpainter · 11-10-2007, 06:59 PM

will do, wish I knew who made this beast, of all the things you could use an owner's manuel for, this would be one of em'

old man roger · 11-10-2007, 07:06 PM

once you start messing with it i don't really think you will need a manual those little bikes are made very simple..

every thing i ever owned that had oil injection the first thing i do is take it off because if it brakes while your riding and it will you will blow your motor

old duffer · 11-10-2007, 07:14 PM

http://www.alphasportsmotors.com

old man roger · 11-10-2007, 07:17 PM

Tomberlin™
3123 Washington Rd.
Augusta, GA 30907
Phone: (706) 860. 8880
Fax: (706) 860.1252

well then duffer has found them.........lol

DLISH · 11-10-2007, 10:27 PM

we sell these at my work, the crf 50 bigbore kit hops 'em up decent

snowpainter · 11-10-2007, 10:50 PM

That's sick bro, I don't think I have seen a scooter like that around KU...hahaha uptight yuppies
I wonder what difference that kit would make on this bike

bikerboy · 11-11-2007, 01:42 AM

Quote:

Originally Posted by Derek M

we sell these at my work, the crf 50 bigbore kit hops 'em up decent

that looks kinda cool actually.

11-10-2007, 05:14 PM	#2
old man roger also known as OMR Join Date: Jul 2006 Location: OMR INDUSTRIES in west palm beach florida Age: Bike: OMR PREPPED 636 Gender: Male Posts: 50,450	Re: Someone has to know what this is... if you can't figure out what it is it looks just like a scooter motor any carb the same size should work take the carb off and go to a local shop that sells scooters and mopeds and just find one that looks like it will fit ...... the size of the intake port will be the deciding factor along with the style of the throttle cable or just fix the carb thats on it

11-10-2007, 05:19 PM	#3
snowpainter Registered User Join Date: Oct 2007 Location: Lawrence,KS Age: 34 Bike: 50..555 Gender: Male Posts: 11	Re: Someone has to know what this is... right on, any idea if one would be beefier than the other, or would it make little difference on such a small bike

11-10-2007, 05:21 PM	#4
snowpainter Registered User Join Date: Oct 2007 Location: Lawrence,KS Age: 34 Bike: 50..555 Gender: Male Posts: 11	Re: Someone has to know what this is... right now the only adjustment is the throttle screw, it runs great for about 5 mins then bogs like it's flooded, may have just bought junk...

11-10-2007, 05:24 PM	#5
old man roger also known as OMR Join Date: Jul 2006 Location: OMR INDUSTRIES in west palm beach florida Age: Bike: OMR PREPPED 636 Gender: Male Posts: 50,450	Re: Someone has to know what this is... have you checked to make sure there isn't crap in the tank ? and if there is a petcock make sure it flows good......

11-10-2007, 05:25 PM	#6
old man roger also known as OMR Join Date: Jul 2006 Location: OMR INDUSTRIES in west palm beach florida Age: Bike: OMR PREPPED 636 Gender: Male Posts: 50,450	Re: Someone has to know what this is... and i don't see a vent tube on the cap ,when it starts running crappy take off the cap and see if it doesn't start running better

11-10-2007, 05:59 PM	#7
snowpainter Registered User Join Date: Oct 2007 Location: Lawrence,KS Age: 34 Bike: 50..555 Gender: Male Posts: 11	Re: Someone has to know what this is... you know your shit Roger! I took off that cap and it runs good but then it poors from the overflow and will probably end up setting my leg on fire...haha Jason was right though, your the man with the answers!!! THANKS

11-10-2007, 06:05 PM	#8
Kelm Haters make me famous! Join Date: Jul 2003 Location: Fredericksburg, VA Age: 20 Bike: 01 F4i bitches! Gender: Male Posts: 8,098	Re: Someone has to know what this is... Roger is like old but yet kick ass and cool with the answers.... kinda like, __________________ F4i Parts for Sale... Listed with prices! http://www.stuntlife.com/forums/464-bike-parts-sale/237465-f4i-parts-sale-w.html

11-10-2007, 06:06 PM	#9
old man roger also known as OMR Join Date: Jul 2006 Location: OMR INDUSTRIES in west palm beach florida Age: Bike: OMR PREPPED 636 Gender: Male Posts: 50,450	Re: Someone has to know what this is... if it pours out the over flow your float is either to high or your needle and seat is not sealing properly if it's the needle and seat then there is probably just a peice of dirt or corrosion in there .... the needle and seat is what lets the gas in the bowl and the float goes up when the bowl is full and that closes the needle and seat

11-10-2007, 06:23 PM	#11
old man roger also known as OMR Join Date: Jul 2006 Location: OMR INDUSTRIES in west palm beach florida Age: Bike: OMR PREPPED 636 Gender: Male Posts: 50,450	Re: Someone has to know what this is... i have never seen a carb like that in my life........lol give cleaning it a try and if that works your good and if you fuck it up so what you were gonna buy a new one any ways......

11-10-2007, 06:45 PM	#12
snowpainter Registered User Join Date: Oct 2007 Location: Lawrence,KS Age: 34 Bike: 50..555 Gender: Male Posts: 11	Re: Someone has to know what this is... Now you know what I mean about the kick in the nuts! It's not the fact that I am mechanicaly retarded, but I have never seen one either, what realy sucks is the fact that it's a 2stroke and it's self-mixing. lesson learned today.... "Impulsive buying can give you gas"

11-10-2007, 06:53 PM	#13
old man roger also known as OMR Join Date: Jul 2006 Location: OMR INDUSTRIES in west palm beach florida Age: Bike: OMR PREPPED 636 Gender: Male Posts: 50,450	Re: Someone has to know what this is... aaaaaaaahhhhhhhhh that brings a whole new aspect to the subject...... put a new plug in it and block off the pump that mixes the oil and just pre mix it in the tank.....................40 parts gas and 1 part oil would be a good starting point as long as there is smoke coming out the tail pipe and you are not fouling plugs then you are good if there isn't smoke add more oil if it fouls the plug quick then less oil..........

11-10-2007, 06:59 PM	#14
snowpainter Registered User Join Date: Oct 2007 Location: Lawrence,KS Age: 34 Bike: 50..555 Gender: Male Posts: 11	Re: Someone has to know what this is... will do, wish I knew who made this beast, of all the things you could use an owner's manuel for, this would be one of em'

11-10-2007, 07:06 PM	#15
old man roger also known as OMR Join Date: Jul 2006 Location: OMR INDUSTRIES in west palm beach florida Age: Bike: OMR PREPPED 636 Gender: Male Posts: 50,450	Re: Someone has to know what this is... once you start messing with it i don't really think you will need a manual those little bikes are made very simple.. every thing i ever owned that had oil injection the first thing i do is take it off because if it brakes while your riding and it will you will blow your motor

11-10-2007, 07:14 PM	#16
old duffer _____________ Join Date: Apr 2004 Location: . Age: 25 Bike: . Gender: Male Posts: 29,241	Re: Someone has to know what this is... http://www.alphasportsmotors.com

11-10-2007, 07:17 PM	#17
old man roger also known as OMR Join Date: Jul 2006 Location: OMR INDUSTRIES in west palm beach florida Age: Bike: OMR PREPPED 636 Gender: Male Posts: 50,450	Re: Someone has to know what this is... Tomberlin™ 3123 Washington Rd. Augusta, GA 30907 Phone: (706) 860. 8880 Fax: (706) 860.1252 well then duffer has found them.........lol

11-10-2007, 10:27 PM	#18
DLISH go big block or go home Join Date: Nov 2002 Location: Denver Age: 30 Bike: classic cars Gender: Male Posts: 14,942	Re: Someone has to know what this is... we sell these at my work, the crf 50 bigbore kit hops 'em up decent

11-10-2007, 10:50 PM	#19
snowpainter Registered User Join Date: Oct 2007 Location: Lawrence,KS Age: 34 Bike: 50..555 Gender: Male Posts: 11	Re: Someone has to know what this is... That's sick bro, I don't think I have seen a scooter like that around KU...hahaha uptight yuppies I wonder what difference that kit would make on this bike