Build or Buy a Tranny Jack - Open Forum

Reyals Bemus · 10-17-2007, 08:42 PM

I need to replace the clutch on my truck, and part of that procedure is getting the transmission off. I was thinking that I could probably build a plate or mount and bolt it onto my car jack and that'll work fine. But I just want to get this done ASAP so if I could find one of those inexpensive transmission jacks (or just a product like I described above that bolts onto a standard jack) then please tell me where I could pick one up for less. Thanks.

bikerboy · 10-18-2007, 03:56 AM

your thinking too hard.

Here's its $50.... don't waste time fkkin around. You can do it without it but this will save trouble.

here......

http://www.brandsonsale.com/transmis...pter-jack.html

StrictlyStunt · 10-18-2007, 04:01 AM

get someone to help you or use a floor jack. I've done clutch's by myself with a floor jack.

Reyals Bemus · 10-18-2007, 08:06 AM

Yeah.

CHADf · 10-18-2007, 03:18 PM

all you need is a floor jack or get a friend and a 12 pack and yank that bitch out,then stab it back in.

Reyals Bemus · 10-18-2007, 07:34 PM

That's pretty much what I plan to do now.. Really don't have any money to burn on a little transmission jack adapter, I just don't want to drop it or bend/break anything.

Beto · 10-18-2007, 08:56 PM

you'll be fine, just be sure to have a friend to help you out. Not a weak one either

Reyals Bemus · 10-24-2007, 08:25 AM

Yesterday I got the driveshaft, transmission, and clutch off. No problems. To be on the safe side, I built a simple rig that fit tightly around the transmission and bolted it to my floor jack. Everything went really smooth all things considered.

My biggest problem while doing this (which made me approach everything cautiously) was that I did not have any perspective on how heavy everything would be. But now I could put everything back together in a few hours because I've now got some experience...

Thanks for the advice.

10-17-2007, 08:42 PM	#1
Reyals Bemus Registered User Join Date: Nov 2006 Location: Billerica, MA, USA Age: 17 Bike: '04 CRF250x, 1977 Sears Tractor Gender: Male Posts: 1,198	Build or Buy a Tranny Jack I need to replace the clutch on my truck, and part of that procedure is getting the transmission off. I was thinking that I could probably build a plate or mount and bolt it onto my car jack and that'll work fine. But I just want to get this done ASAP so if I could find one of those inexpensive transmission jacks (or just a product like I described above that bolts onto a standard jack) then please tell me where I could pick one up for less. Thanks.

10-18-2007, 03:56 AM	#2
bikerboy I Love To Post! Join Date: Jul 2003 Location: San Diego, Ca Age: 87 Bike: 07 CBR 1000 RR Gender: Male Posts: 9,915	Re: Build or Buy a Tranny Jack your thinking too hard. Here's its $50.... don't waste time fkkin around. You can do it without it but this will save trouble. here...... http://www.brandsonsale.com/transmis...pter-jack.html __________________ thundercats.vpga.com www.richstevens.com -------------------- .................--.. .............../??/) ............,/?../ .........../..../ ...../??/'...'/???`?? ../'/.../..../......./??\ ('(...?...?.... ?~/'...') .\.................'...../ ..'\'...\.......... _.?? ....\..............( ......\.............\

10-18-2007, 04:01 AM	#3
StrictlyStunt BRAAAP! Join Date: Sep 2004 Location: Coopersburg PA Age: Bike: OMR PREPPED F4I, KTM450 supermoto, 50, superjet Gender: Male Posts: 5,269	Re: Build or Buy a Tranny Jack get someone to help you or use a floor jack. I've done clutch's by myself with a floor jack. __________________ OMR SUBCAGES!!!

10-18-2007, 08:06 AM	#4
Reyals Bemus Registered User Join Date: Nov 2006 Location: Billerica, MA, USA Age: 17 Bike: '04 CRF250x, 1977 Sears Tractor Gender: Male Posts: 1,198	Re: Build or Buy a Tranny Jack Yeah.

10-18-2007, 03:18 PM	#5
CHADf Registered User Join Date: Nov 2006 Location: ATL GA Age: Bike: GSX-R Gender: Male Posts: 2,028	Re: Build or Buy a Tranny Jack all you need is a floor jack or get a friend and a 12 pack and yank that bitch out,then stab it back in.

10-18-2007, 07:34 PM	#6
Reyals Bemus Registered User Join Date: Nov 2006 Location: Billerica, MA, USA Age: 17 Bike: '04 CRF250x, 1977 Sears Tractor Gender: Male Posts: 1,198	Re: Build or Buy a Tranny Jack That's pretty much what I plan to do now.. Really don't have any money to burn on a little transmission jack adapter, I just don't want to drop it or bend/break anything.

10-18-2007, 08:56 PM	#7
Beto Mexi-PIMP Join Date: Jun 2003 Location: Clanton, AL Age: 19 Bike: 06 636 with HoHey/SI/OMR parts Gender: Male Posts: 7,494	Re: Build or Buy a Tranny Jack you'll be fine, just be sure to have a friend to help you out. Not a weak one either

10-24-2007, 08:25 AM	#8
Reyals Bemus Registered User Join Date: Nov 2006 Location: Billerica, MA, USA Age: 17 Bike: '04 CRF250x, 1977 Sears Tractor Gender: Male Posts: 1,198	Re: Build or Buy a Tranny Jack Yesterday I got the driveshaft, transmission, and clutch off. No problems. To be on the safe side, I built a simple rig that fit tightly around the transmission and bolted it to my floor jack. Everything went really smooth all things considered. My biggest problem while doing this (which made me approach everything cautiously) was that I did not have any perspective on how heavy everything would be. But now I could put everything back together in a few hours because I've now got some experience... Thanks for the advice.