97 yamaha yzf1000 thunderace parts yzf 1000
04-09-2009, 10:39 AM
#21
Hate the smell of TPD
Thread Starter
Join Date: Jun 2008
Location: FLORIDA
Posts: 1,522
Re: 97 yamaha yzf1000 thunderace parts yzf 1000
justed listed all the parts i have copy and past this link to see the rest of the parts i have. thanks Dan
https://www.stuntlife.com/forums/464...ml#post3887620
https://www.stuntlife.com/forums/464...ml#post3887620
05-05-2009, 10:54 AM
#23
Hate the smell of TPD
Thread Starter
Join Date: Jun 2008
Location: FLORIDA
Posts: 1,522
08-23-2009, 09:12 AM
#24
Registered User
Join Date: Aug 2009
Location: JAX, NC
Posts: 1
Re: 97 yamaha yzf1000 thunderace parts yzf 1000
I just picked up a late-1996 YZF1000 for cheap, but it's a basketcase. There's a lot of parts that I need, so can you send me an updated list of the parts you still have left? I'm trying to save some cash by getting used or slightly damaged parts to get my bike running...
Please email me back ASAP!
Rick
Please email me back ASAP!
Rick
. email me at 921studio@gmail.com.
04-22-2010, 11:50 AM
#26
Registered User
Join Date: Apr 2010
Location: Benton, Il USA
Posts: 2
Re: 97 yamaha yzf1000 thunderace parts yzf 1000
i have some spare thunderace parts laying around i need to sell.
Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping.
cylinder needs honed been sitting on self. $50 plus shipping.
cylinder with cam chain tensioner need honned been sitting on self $60
bottom fairing piece but NOT the V piece for the font $50 plus shipping.
solo rear seat fairing pearl white $150 plus shipping.
COMPLETE triple trees (no ignition) $55 plus shipping
taillight $10 plus shipping
left side inner fairing panel $20 plus shipping
start and on/off switch i have 2 of them $10 a piece
i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame.
starter clutch and came chain $15
coils one good one bad $10
3 slave cylinders forgot which one is good $20 for all 3
Oiler line from block to head with bolts $10
shifter shaft $15
clipons with 3 extra bars which are bent $20
2 sets of pistons $15
clutch drum and shift forks $25
sprocket cover $10
inside rear tail peices $10
rear master cylinder and brake line $40
passinger rear sets $20
right side rear set $25
front axle with spacer $10
clutch master cylinder $20
turn signal switchs i have 2 of them neither highbeam switch works $20 a piece
throttle cable housing $10
radiator fan $20
oil pan with bolts $ 25
mirrors $40
gas tank with fuel valve and sending unit no gas cap $50
Email for pictures. thanks dan
Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping.
cylinder needs honed been sitting on self. $50 plus shipping.
cylinder with cam chain tensioner need honned been sitting on self $60
bottom fairing piece but NOT the V piece for the font $50 plus shipping.
solo rear seat fairing pearl white $150 plus shipping.
COMPLETE triple trees (no ignition) $55 plus shipping
taillight $10 plus shipping
left side inner fairing panel $20 plus shipping
start and on/off switch i have 2 of them $10 a piece
i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame.
starter clutch and came chain $15
coils one good one bad $10
3 slave cylinders forgot which one is good $20 for all 3
Oiler line from block to head with bolts $10
shifter shaft $15
clipons with 3 extra bars which are bent $20
2 sets of pistons $15
clutch drum and shift forks $25
sprocket cover $10
inside rear tail peices $10
rear master cylinder and brake line $40
passinger rear sets $20
right side rear set $25
front axle with spacer $10
clutch master cylinder $20
turn signal switchs i have 2 of them neither highbeam switch works $20 a piece
throttle cable housing $10
radiator fan $20
oil pan with bolts $ 25
mirrors $40
gas tank with fuel valve and sending unit no gas cap $50
Email for pictures. thanks dan
03-27-2011, 12:41 AM
#30
Registered User
Join Date: Mar 2011
Location: zephyrhills
Posts: 2
Re: 97 yamaha yzf1000 thunderace parts yzf 1000
William
03-27-2011, 12:45 AM
#31
Registered User
Join Date: Mar 2011
Location: zephyrhills
Posts: 2
Re: 97 yamaha yzf1000 thunderace parts yzf 1000
i have some spare thunderace parts laying around i need to sell.
Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping.
cylinder needs honed been sitting on self. $50 plus shipping.
cylinder with cam chain tensioner need honned been sitting on self $60
bottom fairing piece but NOT the V piece for the font $50 plus shipping.
solo rear seat fairing pearl white $150 plus shipping.
COMPLETE triple trees (no ignition) $55 plus shipping
taillight $10 plus shipping
left side inner fairing panel $20 plus shipping
start and on/off switch i have 2 of them $10 a piece
i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame.
starter clutch and came chain $15
coils one good one bad $10
3 slave cylinders forgot which one is good $20 for all 3
Oiler line from block to head with bolts $10
shifter shaft $15
clipons with 3 extra bars which are bent $20
2 sets of pistons $15
clutch drum and shift forks $25
sprocket cover $10
inside rear tail peices $10
rear master cylinder and brake line $40
passinger rear sets $20
right side rear set $25
front axle with spacer $10
clutch master cylinder $20
turn signal switchs i have 2 of them neither highbeam switch works $20 a piece
throttle cable housing $10
radiator fan $20
oil pan with bolts $ 25
mirrors $40
gas tank with fuel valve and sending unit no gas cap $50
Email for pictures. thanks dan
Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping.
cylinder needs honed been sitting on self. $50 plus shipping.
cylinder with cam chain tensioner need honned been sitting on self $60
bottom fairing piece but NOT the V piece for the font $50 plus shipping.
solo rear seat fairing pearl white $150 plus shipping.
COMPLETE triple trees (no ignition) $55 plus shipping
taillight $10 plus shipping
left side inner fairing panel $20 plus shipping
start and on/off switch i have 2 of them $10 a piece
i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame.
starter clutch and came chain $15
coils one good one bad $10
3 slave cylinders forgot which one is good $20 for all 3
Oiler line from block to head with bolts $10
shifter shaft $15
clipons with 3 extra bars which are bent $20
2 sets of pistons $15
clutch drum and shift forks $25
sprocket cover $10
inside rear tail peices $10
rear master cylinder and brake line $40
passinger rear sets $20
right side rear set $25
front axle with spacer $10
clutch master cylinder $20
turn signal switchs i have 2 of them neither highbeam switch works $20 a piece
throttle cable housing $10
radiator fan $20
oil pan with bolts $ 25
mirrors $40
gas tank with fuel valve and sending unit no gas cap $50
Email for pictures. thanks dan
William
04-13-2011, 05:18 AM
#32
Re: 97 yamaha yzf1000 thunderace parts yzf 1000
i have some spare thunderace parts laying around i need to sell.
Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping.
cylinder needs honed been sitting on self. $50 plus shipping.
cylinder with cam chain tensioner need honned been sitting on self $60
bottom fairing piece but NOT the V piece for the font $50 plus shipping.
solo rear seat fairing pearl white $150 plus shipping.
COMPLETE triple trees (no ignition) $55 plus shipping
taillight $10 plus shipping
left side inner fairing panel $20 plus shipping
start and on/off switch i have 2 of them $10 a piece
i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame.
starter clutch and came chain $15
coils one good one bad $10
3 slave cylinders forgot which one is good $20 for all 3
Oiler line from block to head with bolts $10
shifter shaft $15
clipons with 3 extra bars which are bent $20
2 sets of pistons $15
clutch drum and shift forks $25
sprocket cover $10
inside rear tail peices $10
rear master cylinder and brake line $40
passinger rear sets $20
right side rear set $25
front axle with spacer $10
clutch master cylinder $20
turn signal switchs i have 2 of them neither highbeam switch works $20 a piece
throttle cable housing $10
radiator fan $20
oil pan with bolts $ 25
mirrors $40
gas tank with fuel valve and sending unit no gas cap $50
Email for pictures. thanks dan
Good set of engine cases (one of the retainer screws that holds trans in place broke off in bottom case, no big deal i just dont have the tool to remove it) ill take $90 plus shipping.
cylinder needs honed been sitting on self. $50 plus shipping.
cylinder with cam chain tensioner need honned been sitting on self $60
bottom fairing piece but NOT the V piece for the font $50 plus shipping.
solo rear seat fairing pearl white $150 plus shipping.
COMPLETE triple trees (no ignition) $55 plus shipping
taillight $10 plus shipping
left side inner fairing panel $20 plus shipping
start and on/off switch i have 2 of them $10 a piece
i also have the frame its good and straight one small dent from when bike was knocked over and landed on the corner of a cender block. it has a rebuilt tilte in my name, i would prefer not to ship it but i can, i will take $400 for the frame.
starter clutch and came chain $15
coils one good one bad $10
3 slave cylinders forgot which one is good $20 for all 3
Oiler line from block to head with bolts $10
shifter shaft $15
clipons with 3 extra bars which are bent $20
2 sets of pistons $15
clutch drum and shift forks $25
sprocket cover $10
inside rear tail peices $10
rear master cylinder and brake line $40
passinger rear sets $20
right side rear set $25
front axle with spacer $10
clutch master cylinder $20
turn signal switchs i have 2 of them neither highbeam switch works $20 a piece
throttle cable housing $10
radiator fan $20
oil pan with bolts $ 25
mirrors $40
gas tank with fuel valve and sending unit no gas cap $50
Email for pictures. thanks dan
04-30-2011, 10:14 PM
#33
Registered User
Join Date: Mar 2011
Location: Leesburg, VA USA
Posts: 3
Re: 97 yamaha yzf1000 thunderace parts yzf 1000
Hi... Need complete Thunderace engine - do you have that? Thanks... Replay to czarsmith@aol.com
Thread
Thread Starter
Forum
Replies
Last Post
