nags

Whats the advantage? Are they the same length?

*Tanus*

there like an 1 1/2- 2 inchs longer

kj

advantage is you can rotate them downward under the bar so they don't ever get damaged.... and at the same time keep your kill switch in the correct position.

on the f4i the throttle cable and kill switch are one piece... 1krr is 2 separate.

Stubbz

good description. we lined them up and they seem to be about 1-1.5 inches longer, helps a little for db bars. we used the stock f4i tube and handlebar control tho because if you need to have both things on thier its just taking up more space but may be a good idea if you have the room

50slut

so if you get a 1000rr throttle control setup, it will work on a f4i, cables will hook right up???? does the 1000rr kill switch work to? will it plug right in????

nags

Apparently it wont plug in but the wires all match right up and ya just have to splice 'em together.

Towlieee

Sick info to know!

Definitely gonna go that route to replace my rusted bent throttle cables..

My DB bars put as stretch on my cables!

50slut

NICE im goin that route 2, im sick of dealin with the stock f4i controls their junk!!!! so i could just cut the plug off the f4i control and wire it up to the 1000rr set up?

kj

+1

different plug... but same color wires.

kj

Thats what i did...

50slut

cool thanks

Scott-

I Ride With A Few Guys That Rock The 100rr Throttle Works Great And Yes Just Cut The Wires And Plice Together Thwy All Match Up

Afflicted

just curious because i use to have an f4i, or still kind of do, but does it still have the same throttle throw? or is it longer cause its off a 1000?

kj

same thing...

eazenutz33

I used my stock F4i throttle cables....did the exact same thing on my 600RR, and now got 1/2 of it done on my F4i...the throttle housing is on, but I still have the F4i kill switch mounted in my airduct.

On my RR I did the throttle housing and the kill switch, I never hit my kill switch when riding so I may just leave it in the airduct.

Also, if the 1000RR throttle tube has a diff. "throw" to it changing the twitchiness or whatever, put your F4i throttle tube in the same housing. I have 3 spares throttle tubes from an RR, F4i, 1000RR.....they all seem pretty close, but do have subtle differences.

On the wiring....splice it in, works fine. Make sure to do a good job splicing....I have a wirenut come loose and shut my **** off....I soldered that **** and heat shrinked it!

mike1984

u can also use a 07 600rr setup... not sure about cable length but the setup works the same

nags

So I'm putting these on right now. Why the **** wont the top one reach to the bracket

nags

Ok, so if I adjust the slack up on the tube so that its non existant I can't fight the cable on. But obviously the throttle is tight as **** like that.

*Tanus*

thats weird, try loosening the slack on the bottom line too, or if you have to take off the nut and just run one on the lower cable

nice avatar dog,reppin the sauce

Scott-

hell ya hommie