02 Gsxr 600 For Sale Cheap (telefonica)

[BunaRocket]

I'm selling my 2002 GSXR 600M. The telefonica bodywork was repainted over by the previous owner. There's absolutely nothing wrong with the engine or anything. It's got low mileage (6,000 with gearing so I'm guessing about 4,900 miles). It's set up to stunt but I do drive it to work and back (It's street legal, working tailight, and headlight). Mods it has:

GSXR 1000 Brake Caliper Upgrade (Front and Back)
Clipons turned out for greater advantage on circles and stoppies (can be returned to normal without problem)
New Brakes on Front and Back
Oil Pickup Modification for Stuntex.com (will throw in stock oil pickup)
Reinforced Frame (bottom left frame tab is now way stronger)
The baddest Subframe around (highchair scrapes, the works and it doesn't even budge unlike all other gixxers. It's reinforced with Steel and is the best design I've ever seen for the gixxers, PROBLEM SOLVED!!!)
Gearing is -2, +3
Freestyle Ingenuity 12 Bar ($125)
Almost Brand New Racing 905 Cage ($275 installed it a week ago, and have had one crash on it and that thing is bad A)

Here's the best Distributed use only oil. You can't buy this in a store anywhere. It's independently distributed and cost $25 a quart. Here's why this is the best and you won't find it in any other bike in the market because of its rare status. The oil will not leave the bike, you can actually drain all the oil out of your bike and because I put on quart of this in there you can crank it up and run it without any problems. (EVEN FURTHER FIX FOR THE OIL STARVATION)

Bike has Clean/Clear Texas Title, and low mileage.

Here's what's wrong:'
Fairing stay is bent
Dent in right side of frame (was like that before I bought it and everything is straight and true) IN fact the side fairing covers it up.
Hairline crack around the fairing stay mount (nothing big, I've never had any problems with it)
Bodywork is STUNT!!!!!!!!!!!! Bodywork, but is in better condition that most.
Upper is cracked up because of the bent fairing stay
Tank has some dents, but does not affect riding ability


PERKS!!!
I'm selling it to buy an engagement ring so I need what I'm asking the price is $4,500
For that price I will be throwing in:
66th Rear Sprocket
Another Tail Section cut for the wheelie bar (stunt)
Spare Gas Tank (came with the bike I replaced because it had a crease in the crotch area. However it doesn't leak and I put padding there and rode with it for months, just didn't like the look of camo and padding, lol)
Spare stock Steering damper in MINT Condition
Spare Chain
2nd Stunt windshield (zip tied)

BONUS for $4,900 I'll thow in my Arai helmet ($700 dollars), only scratches are from cliff hangers and rock chips. 3 Sheilds with it ($60 each), Speedrag Stunter Jacket ($300), and Speedrag Gloves ($50).

That will get you set up and on your way for all you need whether it's commuting to work, or scraping highchairs and you don't want to worry about your subframe breaking!!!! Perfect for anyone!!!!! I can crank it up for anyone, or they can download video of the bike in action at www.codebluestuntteam.com.

Here's PICS with the other tank on and before I bent the fairing stay. I'll get some updated pics Monday without the front fairing on because I bent the fairing stay.

Don't Miss Out, I hate to get rid of it but rings are expensive. Bike has no problems whatsoever!!!! Clean/Clear Title, and a mess load of extra stuff for $4,900 w gear, bike, and extras :YEAH
$4,500 w bike and extras

UPDATE:
$4,350 w bike and extras
$4,750 for everything!!!!!

[BunaRocket]

My stoppies went from 90ft, to 375ft after upgrading the front calipers. More PICS will come tomorrow, and you'll see that it's a good bike. In fact you could make this bike mint for about 900 bucks (there's a set of telefonica plastics on ebay right now that includes everything this bike needs to be back to a fine bike for about 725 right now. OR stunt it, Somebody needs a bike??????

[headache]

If i only had some money.... Good luck with the sale

[Skiboarder311]

damnnnnnnn I wish u weren't in texas, Cuz i am lookin for a new bike right now!


How much u think it would cost to ship it?

[BunaRocket]

$400 bucks to ship is usually what it cost, through forwardair.com.

Master cylinder has been fixed now, and the levers turned out. I rode it today and rolled stoppies 200ft, plus at 50mph just from turning the handlebars out (it also helps with circles).

Any offers????

[Skiboarder311]

I'll find out by the end of today weather or not my buddy is buyin my bike,

If he is, I'll PM you my # so we can discuss details

[BunaRocket]

cool, just let me know

[Lb3]

Hey justin, if you bring the bike to austin I can ship it from our shop to anywhere in the US for 175 bucks.

[Skiboarder311]

its lookin good that my bike is gone, But i'm thinkin if this happens i may take a weekend off and drive down and pick it up.

I don't like the idea of buyin sumthin without seein it in person first, Yah know what i'm sayin

[DECEPTICON13]

i'll give you 3200 shipped for it. thats the best i can give you for a cracked frame. i just lost my license again so i need a straight stunt bike....let me know

720-490-7237

robby
call me and we could work something out.

[BunaRocket]

sorry I've been out of town, check all your emails. and sorry I can't go that low, and the frame will be fixed up this week.

[CC900RR]

How far are you from DALLAS texas??? I've been lookin foe a good stunt bike sounds right let me know where exactly Buna is and i might make the trip

[BunaRocket]

I am exactly 5 to 5 and a half hours south of Dallas in the Beaumont Texas Area. I was just in Dallas for a convention with Ecoquest International this weekend, and if you don't take the wrong turns like I did, lol, that's how long it takes.

BUT, don't think that cash talks. Not being rude but my price is my price. If I get offered a penny less, I'll go up a penny. I can't afford to take a loss, because it's a good price.