**Post pictures of F4i's here** - Page 30 - Stunt Bike Pictures

stuntin101 · 05-23-2008, 05:52 PM

Heres a few of my peice...

stuntin101 · 05-23-2008, 06:01 PM

Quote:

Originally Posted by ahenry

any master will work. get a 929 or 954 one

Thats what I thought but a friend of mine said he put 06 1000rr on it and it was mad spongy, expanding his lines and locking up the front end.

Think it has to be 929 or 954? or can it be any one (06 1000rr)

ahenry · 05-23-2008, 06:07 PM

Quote:

Originally Posted by stuntin101

Thats what I thought but a friend of mine said he put 06 1000rr on it and it was mad spongy, expanding his lines and locking up the front end.

Think it has to be 929 or 954? or can it be any one (06 1000rr)

that sounds like bleeding problems.. Im sure the 1000rr would work, get you some stainless lines, you can get a set of russel front f4i lines for real cheap. screw stock lines.

stuntin101 · 05-23-2008, 06:13 PM

Quote:

Originally Posted by ahenry

that sounds like bleeding problems.. Im sure the 1000rr would work, get you some stainless lines, you can get a set of russel front f4i lines for real cheap. screw stock lines.

Thats wassup man.. Thanks..
I wish I wouldve talked to you earlier. I let one go on ebay cause I thought it wouldnt work.. Damn..

ahenry · 05-23-2008, 06:47 PM

if you need a hook up on prices on brake lines or pads.
Custommotorsportsva.com (website sucks) gives us a call we can ship anything if Im not here tell them adam on stuntlife sent you.

Sparks! · 05-24-2008, 06:49 AM

Quote:

Originally Posted by stuntin101

Hey man. I have a couple of questions.. if you dont mind helpin me out.

Im wondering what front radial master will work on the f4i rather than that stock big boxy one. I have vortex clipons and the stock master hits so I cant slide everything all the way on.

Also I wanna put a bar just like the one you have on the red one. what round bar is that? did it bolt right on or did you have to cut it down some?

Hi, I run a ducati 748 brembo, its 16mm non -radial and feels really nice, plenty powerful enough for me. I have a 1000rr throttle as well as the standard hits the upper fairing way too easily. But as said, almost any master will fit its just finding one to clear... of course if you go radial from a newer 05 onwards bike then you won't have the problem at all and can slide it right down to the end of the bar...

The bar is a Sick Innovations, I didn't have to do anything to the bar at all, just bolts straight on easily enough.. the seat unit was a bit akward to get on though... I didn't want to cut too much off really so I just cut off the bare minimum it needed to fit, it was a bit of a pain to bolt up but it looks sooo good it's worth it.

Just needs tail saver, cage, front mudguard and rear wheel doing :YEAH

stuntin101 · 05-27-2008, 11:09 AM

I really appreciate all the help guys

got some work to do now

eazenutz33 · 05-27-2008, 02:32 PM

my new paint

MikeOnTheBike · 06-04-2008, 11:29 PM

well here is what I got so far. fresh paint for the new season. still have to polish the front rim lip. I'll post a bunch of pics from the show this weekend too.

and 3 weeks ago when I picked it up!!!

ahenry · 06-05-2008, 12:25 AM

damn that thing looks good. i love the colors!

spoondogg · 06-05-2008, 01:19 AM

yeah mike that looks sic..... i dont see a clutch or handbrake though. you have those right? haha.... oh hey did you find some pegs for my bike? i can still ride without them. its just very annoying

*nags* · 06-05-2008, 01:38 AM

Quote:

Originally Posted by Sparks!

Hi, I run a ducati 748 brembo, its 16mm non -radial and feels really nice, plenty powerful enough for me. I have a 1000rr throttle as well as the standard hits the upper fairing way too easily. But as said, almost any master will fit its just finding one to clear... of course if you go radial from a newer 05 onwards bike then you won't have the problem at all and can slide it right down to the end of the bar...

The bar is a Sick Innovations, I didn't have to do anything to the bar at all, just bolts straight on easily enough.. the seat unit was a bit akward to get on though... I didn't want to cut too much off really so I just cut off the bare minimum it needed to fit, it was a bit of a pain to bolt up but it looks sooo good it's worth it.

Just needs tail saver, cage, front mudguard and rear wheel doing :YEAH

Whys your front sitting so high?

DoubleSustanon · 06-05-2008, 01:44 AM

Quote:

Originally Posted by nags

Whys your front sitting so high?

prolly cuz theres no front fender on it

*nags* · 06-05-2008, 01:49 AM

I meant more the distance from the clipons to the ram air covers

REVLIMIT · 06-05-2008, 03:10 AM

Heli bars maybe that raise it up? or maybe just cause it's flipped race clamps so the angle makes it look higher. Whatever it is...that looks strange haha

MikeOnTheBike · 06-05-2008, 03:32 AM

Quote:

Originally Posted by spoondogg

yeah mike that looks sic..... i dont see a clutch or handbrake though. you have those right? haha.... oh hey did you find some pegs for my bike? i can still ride without them. its just very annoying

nope

no clutch or handbrake but I have loaners lined up for the show:YEAH:YEAH and then after I am going to do something with HO HEY!!! cause they are the best thing out. still have not found a peg. I have a bent left passenger peg but no shifter peg yet.

Kolat · 06-05-2008, 04:35 AM

and I did this last weekend.

T

Sparks! · 06-05-2008, 04:45 PM

Quote:

Originally Posted by nags

Whys your front sitting so high?

I don't know?? Just got harris race clip ons flipped and swapped, they angle up rather than down so they'll be further from the duct covers..... the front is standard and bolted up as per standard .... might just be the angle of the picture or something

it does look rather high in the pics, but f4i's always have a high front end, one thing I've always disliked about them....

jstuntlocke · 06-07-2008, 11:48 AM

Quote:

Originally Posted by MikeOnTheBike

well here is what I got so far. fresh paint for the new season. still have to polish the front rim lip. I'll post a bunch of pics from the show this weekend too.

and 3 weeks ago when I picked it up!!!

I'm approaching two weeks having mine, and I wish I would be this far in a week!!! looks pretty good from what you started with.... I'll be posting up similar pics soon myself...

& holy loud pipes batman!!!

And what does Kolat mean Kolat?

Kolat · 06-07-2008, 02:55 PM

heh it was from a game I played as a kid back when I was really nerdy, I started using it back then and have used it for everything since. Basically it was a ninja in the game I played :-)

T

05-23-2008, 05:52 PM	#581
stuntin101 Registered User Join Date: Aug 2004 Location: Deltona, Florida Age: 26 Bike: cbr900rr Gender: Male Posts: 174	Re: Post pictures of F4i's here Heres a few of my peice... Last edited by stuntin101 : 05-23-2008 at 05:53 PM. Reason: wrong urls

05-23-2008, 06:47 PM	#585
ahenry Registered User Join Date: Apr 2006 Location: lynchburg va Age: 24 Bike: custommotorsportsva.com f4i!! 06 crf Fiddy Gender: Male Posts: 929	Re: Post pictures of F4i's here if you need a hook up on prices on brake lines or pads. Custommotorsportsva.com (website sucks) gives us a call we can ship anything if Im not here tell them adam on stuntlife sent you.

05-27-2008, 11:09 AM	#587
stuntin101 Registered User Join Date: Aug 2004 Location: Deltona, Florida Age: 26 Bike: cbr900rr Gender: Male Posts: 174	Re: Post pictures of F4i's here I really appreciate all the help guys got some work to do now

06-04-2008, 11:29 PM	#589
MikeOnTheBike WWW.IDOLRIDERS.COM Join Date: Mar 2006 Location: Sacramento, Ca, USA, Earth Age: 27 Bike: HONDA Stunt Machine Gender: Male Posts: 897	Re: Post pictures of F4i's here well here is what I got so far. fresh paint for the new season. still have to polish the front rim lip. I'll post a bunch of pics from the show this weekend too. and 3 weeks ago when I picked it up!!!

06-05-2008, 12:25 AM	#590
ahenry Registered User Join Date: Apr 2006 Location: lynchburg va Age: 24 Bike: custommotorsportsva.com f4i!! 06 crf Fiddy Gender: Male Posts: 929	Re: Post pictures of F4i's here damn that thing looks good. i love the colors!

06-05-2008, 01:19 AM	#591
spoondogg Registered User Join Date: Feb 2007 Location: willows,CA Age: 15 Bike: '01 f4BZ!, '05 Drz400s Gender: Male Posts: 671	Re: Post pictures of F4i's here yeah mike that looks sic..... i dont see a clutch or handbrake though. you have those right? haha.... oh hey did you find some pegs for my bike? i can still ride without them. its just very annoying

06-05-2008, 01:49 AM	#594
nags FUCK IT. Join Date: Sep 2002 Location: S. Florida Age: 26 Bike: 2003 F4i / 2002 Honda CBR954 / Yamaha Zuma Gender: Male Posts: 58,032	Re: Post pictures of F4i's here I meant more the distance from the clipons to the ram air covers __________________ Advertise Here! http://www.the-nags.com/ http://www.stuntex.com http://www.moto-heaven.com

06-05-2008, 03:10 AM	#595
REVLIMIT Registered User Join Date: Jul 2005 Location: On the Island of Oahu, HI Age: 25 Bike: 96 GSXR750 Gender: Male Posts: 458	Re: Post pictures of F4i's here Heli bars maybe that raise it up? or maybe just cause it's flipped race clamps so the angle makes it look higher. Whatever it is...that looks strange haha

06-05-2008, 04:35 AM	#597
Kolat Registered User Join Date: Jul 2005 Location: Warshington Age: 26 Bike: f4easy Gender: Male Posts: 553	Re: Post pictures of F4i's here and I did this last weekend. T

06-07-2008, 02:55 PM	#600
Kolat Registered User Join Date: Jul 2005 Location: Warshington Age: 26 Bike: f4easy Gender: Male Posts: 553	Re: Post pictures of F4i's here heh it was from a game I played as a kid back when I was really nerdy, I started using it back then and have used it for everything since. Basically it was a ninja in the game I played :-) T