Turtle has a secret admireor (sp)

 

i admire turtle, he's man sexy.

 

don't hate sir

What is his display picture? Post up the myspace link

awwww you are sweet....for an ethiopian

 

dont hate congratulate

 

http://www.myspace.com/big_anger956

 

I I havent read the entire thread so I hope I am not repeating anyones thoughts, 900RR's and F3's had a 5 bolt sprocket, that may have been the mix up. More than likely the reason it doesnt fit a chain besides an old one is that he took measurements off an old sprocket when he was drawing it up, they make sprocket/gear drawing programs which do most of the math for you, at most he would have had to mic the roller on the chain to get the proper radius. Looks like powder coating to me, the thick edges of the teeth is a dead give away. The powder coating will also give you an issue with chain fitment because it tends to be thicker than paint, I had a sprocket powder coated once and it was a tight fit till it chipped off. I wouldnt trust that sprocket if it was made out of titanium, there was way too much metal removed. The squids should have been the only cut outs.

 

Buyer beware. Drgnazz is now running some other shop called KC Customs - or something like that? I saw it in his profile under his screen name. Just beware that if you buy something you may get screwed in the long run

 

nice find neal

 

Actually its DC Kustoms. Here's a link to his profile. Again BUYER BEWARE. I dont care how nice of a guy he is to his friends - the fact remains is he fucked a lot of people over on this forum and thats not nice

https://www.stuntlife.com/forums/mem...5-drgnazz.html

drgnazz
DC Kustoms




Join Date: Oct 2004
Location: Muldrow, Oklahoma
Age: 31
Bike: 02 F4I
Gender: Male
Posts: 480


Word Turtle Every time I bump any of my other threads that need bumping, this is gonna get bumped along with it unless he wants to straighten this **** out. I got a new unused sprocket sitting here collecting dust. You ride a fixxer draginazz. Buy this **** back and put it on your fixxer

 

actually he rides an f4i but i hear ya bump away.

 

He used to ride fixxers anyway.

 

Nice find. He got me too.

 

I told several of you that I only sold them, the guy that was cutting them was Tim Rogers. his number is 479-462-2227. good luck getting an answer, he got fired from his job where I found out later that he was stealing the material from and cutting them when he was supposed to be doing his work. he owes me a lot of money too. if you dont like it then **** off ! if you worked at hai and sold somebody something that didnt work would you personally be responsible for refunding their money out of your pocket if you didnt work there anymore? **** no you wouldnt. get off my ******* nuts. the company closed, I got screwed, you got screwed. deal with it. and DC Kustoms is a shop that is labor only. I bag and body drop trucks. I have been doing that since 2000, and have never had a customer complaint, so go **** yourselves.

 

Are you ******* for real with this post? So what you are saying is that I am going to start a bizz and sell stuff that I get from other people and when it's doesn't work of fit or for that matter is totally wrong I should give them the number to the company that makes it and tell them to take it up with them not me that ******* TARD WHO SOLD IT? You can't be for real on this you dip ****! Face it you are a ******* dead beat who takes peoples money gives them some **** box part you made from legos that doesn't fit **** and will not refund anyones money. You are scum and I hope you go to buy a house or some **** to find out the owner before you was a bigger **** bag then you and fucked up all kinds of **** in it and didn't tell and when you say " I don't want this house it's a **** box" They say " here is the number of the guy who built it take it up with him" ****** loser

 

MINE fit JUST FINE!!!!

 

what part of " I just sold them" do you not understand? I sold them for someone else. they went out of business, I lost money. people got screwed and I am one of them. I ran those sprockets myself and so did a lot of people that had no problems. I had one on my gixxer and have one for my F4i. they fit fine. I seriously dont see how you guys expect me to pay out of my pocket for products I sold as an employee of a company that went out of business. thats rediculous. think what you want, I know what happened and have told all of you so say what you want. I am done with all you wana be internet gangstas. glad I gave you something to hate about to bring some excitement to your pathetic lives.

 

Suck a dick ******. If you were willing to sell there product, you should be willing to back that product. Not punk someone else out and say "get at them" Get outta here with that bullshit

 

is that your bussiness moto? so much for "the customer is always right" I guess, haha

bwahahhahahha

 

Hahahahahahaha you know I'll agree with everyone else. NEVER once did you tell me you just worked for them. When we spoke the first time when I ordered the subframe (which took 4-5 months to received btw) you said that you and your homie started tandem designworks so thats straight up bullshit. I posted this thread to put out there that you do bad business and I wasnt expecting this many people to chime in saying how much of a crook you and your company were. If I was the only one who got screwed it'd be one thing but there's a shitload of people who got fucked over by "your" company and I'm pretty sure they all didnt approach you after the company closed down. And I'm not surprised your little venture didnt pan out - you made a shitty product that didnt fit anyones bike and was full of flaws. And your posts dont make it sound as if you work for them - you made it sound like its your company:

https://www.stuntlife.com/forums/pos...495-post5.html

https://www.stuntlife.com/forums/pos...362-post1.html

https://www.stuntlife.com/forums/pos...487-post6.html

https://www.stuntlife.com/forums/464...kets-sale.html

So please save the bullshit. More importantly than your bullshit excuses is the manner in which you conduct business. This thread proves you're really an ******* and that even if someone bought something from you personally and you fucked up that you would do absolutely NOTHING to rectify the situation. Scumbags are just like that. I know some of your friends came to your rescue about how you're a great guy and all but this has nothing to do with that. I'll help them reword it - that drgnazz is a great guy but sucks at business. That would be more like it. So in closing, I'll agree with everyone else and tell you to **** off and I hope that any venture that you partake in leads to nothing but FAILURE. Until then I'll keep bumping this thread so people know you're a phony - especially if I see any "for sale" threads from you. I'll be sure to post this thread in any of your threads so people know what to expect when they send you loot.

 

man thats all i can do dont get me wrong im not saying that you are wrong If i got a part that i paid for i would expect it to fit no ?'s asked and if it didnt i would want a refund but just like you said i am just a friend we ride on weekends and are cool the one i got was a little off just a little grinding and it worked but you shouldnt have to do that if you paid for it to fit right. but like you said above is right