905 Race railz touching down??

-SKETCHY- · 07-02-2009, 10:19 AM

Has anyone experianced decking out these railz while cornering? A customer of ours was scrubbing both sides while cornering in the mountains which caused a wreck, a pretty bad one.

Input Please

This ad is not displayed to registered members.
Register your free account today and become a member on StuntLife !

ROWDY · 07-02-2009, 10:23 AM

Thats what he gets for trying to be Ben Spies...

ELBOWS ARE NOT SUPPOSED TO TOUCH ON PUBLIC ROADWAYS

Rainey0000 · 07-02-2009, 10:42 AM

nice avatar picture... haha

ShaneGSXR21 · 07-02-2009, 10:59 AM

my friend has a set he's not balls to the wall revlimiter racer (tho he could be, he just doesnt care) but hes banged them when were ridin in the mountains and there are banked swithcbacks.

-SKETCHY- · 07-02-2009, 11:16 AM

I feel bad cause he shattered his wrist, this was sunday. Then I drove his 09' Wrx on Monday & blew the motor

frayz · 07-02-2009, 11:21 AM

I would like to see someone who can scrub both sides in a turn...:shrugg

JMZ · 07-02-2009, 11:21 AM

I have a set on my 07 1krr and I had to cut the slider pucks down cause they were touching and now people behind me say I'm still close to touching on backroads. Not to mention the vibration from my bike (least that's what Aaron says) is breaking the welds, sent em back and had em rewelded and PC'ed and they did it again. Bout to take em off, not happy with em at all to be honest!

-SKETCHY- · 07-02-2009, 11:23 AM

Quote:

Originally Posted by JMZ

I have a set on my 07 1krr and I had to cut the slider pucks down cause they were touching and now people behind me say I'm still close to touching on backroads. Not to mention the vibration from my bike (least that's what Aaron says) is breaking the welds, sent em back and had em rewelded and PC'ed and they did it again. Bout to take em off, not happy with em at all to be honest!

Yea, the pucks where hitting big time

JMZ · 07-02-2009, 11:28 AM

I've always though about the outcome if I did touch rail to ground, they stick out way to far, tryin to get SI to fab me some since theirs are against the bike pretty much.... think they may come off today

biggie smalls · 07-02-2009, 11:31 AM

that sucks... dont be worried about the wrx motor tho. its a common problem with the new 09 motor.

more info @ www.nasioc.com

John LegionST · 07-02-2009, 11:49 AM

He needs to work on his body position. Getting off the bike more = less lean angle for a given speed and corner. First time I went to the track I had a similar problem, got some pointers from some expert racers, improved my body position, and was carrying MORE speed and LESS lean angle. Get off the seat folks, body pos. makes a HUGE difference!

still, hope he heels up fast and if he's going to ride like that it would be a great investment on his part to go to some track days!!!

ShaneGSXR21 · 07-02-2009, 11:50 AM

Quote:

Originally Posted by -SKETCHY-

I feel bad cause he shattered his wrist, this was sunday. Then I drove his 09' Wrx on Monday & blew the motor

09 wrx's are poppin like crazy, dealership should be goos at fixxin that shit for him quick..... if he broke his right wrist and its a manual it shouldnt bother him anyway haha

-SKETCHY- · 07-02-2009, 11:58 AM

Quote:

Originally Posted by ShaneGSXR21

09 wrx's are poppin like crazy, dealership should be goos at fixxin that shit for him quick..... if he broke his right wrist and its a manual it shouldnt bother him anyway haha

yea, there putting a new motor in it under warranty

*trix* · 07-02-2009, 12:06 PM

http://forums.nasioc.com/forums/show....php?t=1648372

i read like half of this already man the 09's suck

Austin913 · 07-02-2009, 12:12 PM

not familiar with the 905's. I've run the Powers Race Railz out at Heartland Park on the road course, no problems. Plenty of corner clearance.

-SKETCHY- · 07-02-2009, 12:14 PM

Quote:

Originally Posted by *trix*

http://forums.nasioc.com/forums/show....php?t=1648372

i read like half of this already man the 09's suck

That makes me feel better

Tomball_D · 07-02-2009, 01:06 PM

seems like they are more stunt oriented anyways, twisty riders might wanna go with frame sliders even though they are worthless over 10mph, jmo

Cincykillz · 07-02-2009, 01:22 PM

frame sliders help from breaking covers but your fairings get fucked

-SKETCHY- · 07-02-2009, 01:31 PM

I think frame sliders are a complete waste of money

rookie stunter · 07-02-2009, 03:25 PM

ive seen a few times where they have really saved a bike from a lot of damage.

07-02-2009, 10:23 AM	#2
ROWDY AM O.G Join Date: Jun 2004 Location: ATL , GA Age: 33 Bike: THE 1'S with wings on'em Gender: Male Posts: 2,671	Re: 905 Race railz touching down?? Thats what he gets for trying to be Ben Spies... ELBOWS ARE NOT SUPPOSED TO TOUCH ON PUBLIC ROADWAYS __________________ www.wheelieshow.com, www.theinhouse.com, www.overtwocustoms.com www.sickinnovations.com, www.Hoheydesigns.com, www.bbcracing.com www.damagecontrolproducts.webs.com

07-02-2009, 10:42 AM	#3
Rainey0000 Registered User Join Date: Sep 2006 Location: New Castle, Pa, United States Age: 23 Bike: f4i Gender: Male Posts: 340	Re: 905 Race railz touching down?? nice avatar picture... haha

07-02-2009, 10:59 AM	#4
ShaneGSXR21 Registered User Join Date: Oct 2007 Location: DCL, Maryland Bike: 05 gixxer Gender: Male Posts: 514	Re: 905 Race railz touching down?? my friend has a set he's not balls to the wall revlimiter racer (tho he could be, he just doesnt care) but hes banged them when were ridin in the mountains and there are banked swithcbacks. __________________ My wheelies are garbage and I drink cheap beer through a funnel.

07-02-2009, 11:16 AM	#5
-SKETCHY- Sketchy Stunts Join Date: Jun 2005 Location: my name is Andy & "I" like to party!! Age: 29 Bike: 05' KAWI!!!! Gender: Male Posts: 13,476	Re: 905 Race railz touching down?? I feel bad cause he shattered his wrist, this was sunday. Then I drove his 09' Wrx on Monday & blew the motor __________________ Need parts?? Hit me up PORZIO PERFORMANCE INC. www.hoheydesigns.com www.magura.com

07-02-2009, 11:21 AM	#6
frayz J Blox Join Date: Sep 2004 Location: Mobile, Abalama Age: 24 Bike: 06 636,06 zx10, 05 crf150 Gender: Male Posts: 3,866	Re: 905 Race railz touching down?? I would like to see someone who can scrub both sides in a turn...:shrugg __________________ I got mad multidirectional Blox Originally Posted by Griffy you could probably do knee in bar podiums full fairing.

07-02-2009, 11:21 AM	#7
JMZ Like I Give A Fu@k! Join Date: Jan 2004 Location: Right Here! Age: 30 Bike: A Sick/HoHey f4i/929/1000rr, 07 cbr 1000rr, 03 xr50, 06 raptor 700 Gender: Male Posts: 2,331	Re: 905 Race railz touching down?? I have a set on my 07 1krr and I had to cut the slider pucks down cause they were touching and now people behind me say I'm still close to touching on backroads. Not to mention the vibration from my bike (least that's what Aaron says) is breaking the welds, sent em back and had em rewelded and PC'ed and they did it again. Bout to take em off, not happy with em at all to be honest!

07-02-2009, 11:28 AM	#9
JMZ Like I Give A Fu@k! Join Date: Jan 2004 Location: Right Here! Age: 30 Bike: A Sick/HoHey f4i/929/1000rr, 07 cbr 1000rr, 03 xr50, 06 raptor 700 Gender: Male Posts: 2,331	Re: 905 Race railz touching down?? I've always though about the outcome if I did touch rail to ground, they stick out way to far, tryin to get SI to fab me some since theirs are against the bike pretty much.... think they may come off today

07-02-2009, 11:31 AM	#10
biggie smalls Registered User Join Date: Jul 2008 Location: ohio Bike: 03 r6 stunna Gender: Male Posts: 150	Re: 905 Race railz touching down?? that sucks... dont be worried about the wrx motor tho. its a common problem with the new 09 motor. more info @ www.nasioc.com

07-02-2009, 11:49 AM	#11
John LegionST Group Moderator Join Date: Oct 2002 Location: Morrisville, PA (now philly) Age: 30 Bike: '03 636/'05 CBR600RR streeter (gone '04 636 really going to miss that bike!!!) Gender: Male Posts: 6,974	Re: 905 Race railz touching down?? He needs to work on his body position. Getting off the bike more = less lean angle for a given speed and corner. First time I went to the track I had a similar problem, got some pointers from some expert racers, improved my body position, and was carrying MORE speed and LESS lean angle. Get off the seat folks, body pos. makes a HUGE difference! still, hope he heels up fast and if he's going to ride like that it would be a great investment on his part to go to some track days!!! __________________ SPONSORS: For the best deals be sure to mention John Legion www.FullThrottleInc.NET Everyone needs a handbrake, get the highest quality and best prices here. www.FICages.com www.Sickinnovations.com

07-02-2009, 12:06 PM	#14
trix MERK STEP UGHHHHHH Join Date: Oct 2008 Location: baldwin, ny, united states Bike: 05 636/pepboys special 70cc/yamaha xt125 street legal Gender: Male Posts: 3,460	Re: 905 Race railz touching down?? http://forums.nasioc.com/forums/show....php?t=1648372 i read like half of this already man the 09's suck __________________ www.SPbikeshop.com my names mike......I do wheelies.....wheelies are fun....

07-02-2009, 12:12 PM	#15
Austin913 shady since the 80's Join Date: Jun 2009 Location: Kansas City Age: 32 Bike: '04 ZX6R, 02 f4i, BMS MIDI, Fit Series 2 Gender: Male Posts: 377	Re: 905 Race railz touching down?? not familiar with the 905's. I've run the Powers Race Railz out at Heartland Park on the road course, no problems. Plenty of corner clearance.

07-02-2009, 01:06 PM	#17
Tomball_D Registered User Join Date: Mar 2009 Location: Houston, Texas, USA Bike: 99 DR350 - 04 CRF50 Sold the Stunter Gender: Male Posts: 829	Re: 905 Race railz touching down?? seems like they are more stunt oriented anyways, twisty riders might wanna go with frame sliders even though they are worthless over 10mph, jmo __________________ HooDoo?WeDo...

07-02-2009, 01:22 PM	#18
Cincykillz Registered User Join Date: Aug 2007 Location: Cincy, Oh, US Age: 21 Bike: 05 GSXR 600, 06 636, 03f4i Gender: Male Posts: 883	Re: 905 Race railz touching down?? frame sliders help from breaking covers but your fairings get fucked

07-02-2009, 01:31 PM	#19
-SKETCHY- Sketchy Stunts Join Date: Jun 2005 Location: my name is Andy & "I" like to party!! Age: 29 Bike: 05' KAWI!!!! Gender: Male Posts: 13,476	Re: 905 Race railz touching down?? I think frame sliders are a complete waste of money __________________ Need parts?? Hit me up PORZIO PERFORMANCE INC. www.hoheydesigns.com www.magura.com

07-02-2009, 03:25 PM	#20
rookie stunter ***tastic Join Date: Apr 2007 Location: elizabeth city, nc Age: 28 Bike: f4ez, yfz450, crf fiddy Gender: Male Posts: 691	Re: 905 Race railz touching down?? ive seen a few times where they have really saved a bike from a lot of damage. __________________ i dont have one