Billet clutch perch/lever available SOON!!

[Righteous 1]

The "list" as it stands, now..... Stuntlife: -Nasty- OnEWhEeLNEAL TongWoo LOCO UpOnOne tsweers89 famousf4i onewheelboy deanknight636 Bray rance Judd cjones 636 travassb2121 WHEELIE Buddha 43 Up on 1 R6 evilsydeeggot A-BX tech1234 Fash00 moto1399 hafrak13 Beto sQuiD FigHTer Stuntride: sloppylobster Val_O LatinImagexx ryno Rebel Man Greg M SIC G

This ad is not displayed to registered members. Register your free account today and become a member on StuntLife !

[Righteous 1]

Originally Posted by OnEWhEeLNEAL

Wackkkkkkkkkk - you should be beat for getting everyones hope up lol. J/K - lemme know when they ready

Originally Posted by f4ibry

buster

Live and learn, man.........live and learn. My appologies.

[cjones_636]

Originally Posted by Righteous 1

Allright guys...........It's looking like my procrastinator of a machinist ISN'T going to have the complete units done by the end of the month....


I'm bummed....


As I told you before.......he(my machinist) is financing the ENTIRE production of these units. He has an aerospace contract as well as several other BIG SELLER items he produces. He fell behind on a couple orders and also received a few new orders from self-financed costumers, which inevitably sent me BACK to the back of the list.

I appologize that I set a deadline that I couldn't produce the clutch by............I honestly thought it would be done.


I ask that you guys that have been here from the begining, and the new guys alike..............please don't give up! The Righteous Stunt Clutch WILL be in production sometime soon!! I promise!!

It WILL be worth the wait!

If you were self financed, would you secure production priority?

Looking for an investor? hit me up with a pm...

[f4ibry]

im just bustin balls dude!

at least u havent taken money

[sQuiD FigHTer]

this clutch better be righteous hahaha

[WADESEC518]

Originally Posted by sQuiD FigHTer

this clutch better be righteous hahaha

+1 all this excitement on a "rumor"... he should be able to produce a prototype at the least for you to test before you go full blown production how do you know your design will even work the way its intended to???

[Buddha43]

Originally Posted by Righteous 1

Allright guys...........It's looking like my procrastinator of a machinist ISN'T going to have the complete units done by the end of the month....


I'm bummed....


As I told you before.......he(my machinist) is financing the ENTIRE production of these units. He has an aerospace contract as well as several other BIG SELLER items he produces. He fell behind on a couple orders and also received a few new orders from self-financed costumers, which inevitably sent me BACK to the back of the list.

I appologize that I set a deadline that I couldn't produce the clutch by............I honestly thought it would be done.


I ask that you guys that have been here from the begining, and the new guys alike..............please don't give up! The Righteous Stunt Clutch WILL be in production sometime soon!! I promise!!

It WILL be worth the wait!

no worries brah! as soon as its ready, then I am ready too....lol

[-Nasty-]

i say for being first on the list and waiting so long, u just give me one

[Righteous 1]

Originally Posted by WADESEC518

+1 all this excitement on a "rumor"... he should be able to produce a prototype at the least for you to test before you go full blown production how do you know your design will even work the way its intended to???

He's an interesting guy.......he says he doesn't want to make just one, since we are using a tried and tested product to get our demensions from.....chances are, the prototypes will work great.....and hopefully only need slight mods for the production run. He's making 40 prototypes, then we're going from there.

"rumor"......

[Righteous 1]

Originally Posted by sQuiD FigHTer

this clutch better be righteous hahaha

I'm SURE it will!

Originally Posted by Buddha43

no worries brah! as soon as its ready, then I am ready too....lol

Originally Posted by -Nasty-

i say for being first on the list and waiting so long, u just give me one

Ha ha.....not a chance. Thanks for your patience, bro!

[WADESEC518]

Originally Posted by Righteous 1

"rumor"......

"rumor" meaning that we havent even seen a picture nor a product yet so until one of the two happens, its still a rumor. if your machinist does make these and they do work as intended, than you can add me to the list also

[Righteous 1]

Originally Posted by WADESEC518

"rumor" meaning that we havent even seen a picture nor a product yet so until one of the two happens, its still a rumor. if your machinist does make these and they do work as intended, than you can add me to the list also

It may be a rumor to you, but its reality to me! I'm in the process of gathering financial investors, cause I'm over this being thrown to the backburner BS. You'll be on the list!

[scott3824]

Originally Posted by Righteous 1

The "list" as it stands, now.....

http://www.stuntlife.com/forums/post...1-post125.html

[Righteous 1]

Originally Posted by scott3824

http://www.stuntlife.com/forums/post...1-post125.html

Ha ha......sorry, bro! Didn't know if you were looking to get on the list or just letting me know to make both sizes of levers, and you'ld be interested in the future. Yer on!

[Righteous 1]

The "list" as it stands, now.....

Stuntlife:

-Nasty-
OnEWhEeLNEAL
TongWoo
LOCO
UpOnOne
tsweers89
famousf4i
onewheelboy
deanknight636
Bray
scott3824
rance
Judd
cjones 636
travassb2121
WHEELIE
Buddha 43
Up on 1 R6
evilsydeeggot
A-BX
tech1234
Fash00
moto1399
hafrak13
Beto
sQuiD FigHTer

Stuntride:

sloppylobster
Val_O
LatinImagexx
ryno
Rebel Man
Greg M
SIC G

[HighStyles]

so.. aug. is almost over.. haven't read the latest... are they done? seriously man, if you have the dimensions, i'll give you my machine shops number and they'll have you one by monday...

[HighStyles]

and as far as investors... why not just take pre-orders? should cover the cost.. figure 40.00 a pop ( no way it should be more then that. ) you got like 20 people already.. thats 800 bucks, that should be WAY more then enough for you to have this made at even the most pricest machine shops. OR tell him you'll get it done elsewhere and maybe he'll get on the ball.


*went back a read alittle bit*

[Righteous 1]

Originally Posted by HighStyles

and as far as investors... why not just take pre-orders? should cover the cost.. figure 40.00 a pop ( no way it should be more then that. ) you got like 20 people already.. thats 800 bucks, that should be WAY more then enough for you to have this made at even the most pricest machine shops. OR tell him you'll get it done elsewhere and maybe he'll get on the ball.


*went back a read alittle bit*

Nah......I won't take anyones money until they're ready to ship. I told him I'ld go elsewhere soon, if I don't see progress. Thanks for your offer. Just trying to work with a local......shit the machine shop is right across the street from my work......couldn't get much more convenient than that. He still says hes goona have levers done by Friday....we'll see.

[OnEWhEeLNEAL]

fuckin skanks.

[HighStyles]

Originally Posted by onewheelneal

fuckin skanks.

mom!!! Mom!!! Where the fucks my protien!!