Calling aLL NY stunters and stunteresses - Page 1059

ScottFuries · 11-07-2009, 02:05 PM

Quote:

Originally Posted by ScottFuries

gonna try to make it tomorrow. gonna call gill later, he said hes down.
finally done with the new oven and shop is all set back up...so im all good now

slept in....yawn

This ad is not displayed to registered members.
Register your free account today and become a member on StuntLife !

Ethiopian · 11-07-2009, 02:08 PM

Quote:

Originally Posted by OnEWhEeLNEAL

I would text him telling him to bring them coz he probably wont check back on here.

I think we use to pay $35 for 8 feet 7/8 aluminum. This last time around though we got a sick deal but I cant remember the specifics. It was something like $20 per person and we each got 18 feet I think

He was relocating gettin rid of inventory.

Oh fuck cuttin the shit - take a pipe cutter and run it around in circles 10 times and the shit will be cut. Pipe cutter and a bench vise grip to hold it. Shits easy. But not a small pipe cutter - has to be a little bigger than the really small $3 one they sell.

do you guys use solid 6061 aluminum too?

OnEWhEeLNEAL · 11-07-2009, 02:11 PM

Quote:

Originally Posted by Ethiopian

do you guys use solid 6061 aluminum too?

OH SCHNAPP - yours is SOLID. Nah ours isnt solid but the inner wall is thicker than the vortex so they're a little stronger. Hmmmmm I dunno if I'd personally wanna use solid right now just coz Im such a squid and all but one day I could see me doing that

Thats when I'll hit u up to get your aluminum guys info lol

Ethiopian · 11-07-2009, 02:13 PM

zac uses solid steel in his lmao. i smashed my f4i into the ground and never broke a clamp but i dont really crank mine down crazy so they will rotate in a hard wreck.

Ethiopian · 11-07-2009, 02:16 PM

i dont go to a aluminum guy i just get it from the local fastenal.

OnEWhEeLNEAL · 11-07-2009, 02:18 PM

Quote:

Originally Posted by Ethiopian

zac uses solid steel in his lmao. i smashed my f4i into the ground and never broke a clamp but i dont really crank mine down crazy so they will rotate in a hard wreck.

Quote:

Originally Posted by Ethiopian

i dont go to a aluminum guy i just get it from the local fastenal.

Word - Im sure I'll be able to find some solid 6061. I never looked tho coz I didnt wanna fuck shit up. I just cut up 14 tubes the other day. One day Ima sit there and drill a hole in each one for my throttle and then I'll have a shitload of spares ready to go. Thats how I doos it kid

toneth · 11-07-2009, 03:19 PM

Gah all this shit is discouraging... The exhaust won't line up either, and when I went to put it down I laid it down in a pile of dogshit.

Gonna be about $600 to get everything I need. I'll be ordering it all on Friday.

MikeM · 11-07-2009, 06:00 PM

Quote:

Originally Posted by OnEWhEeLNEAL

I would text him telling him to bring them coz he probably wont check back on here.

I think we use to pay $35 for 8 feet 7/8 aluminum. This last time around though we got a sick deal but I cant remember the specifics. It was something like $20 per person and we each got 18 feet I think

He was relocating gettin rid of inventory.

Oh fuck cuttin the shit - take a pipe cutter and run it around in circles 10 times and the shit will be cut. Pipe cutter and a bench vise grip to hold it. Shits easy. But not a small pipe cutter - has to be a little bigger than the really small $3 one they sell.

yeah i normally use a big pipe cutter instead of the saw

MikeM · 11-07-2009, 06:01 PM

Quote:

Originally Posted by Ethiopian

do you guys use solid 6061 aluminum too?

we use 3/16" wall 6061

MikeM · 11-07-2009, 06:02 PM

Quote:

Originally Posted by OnEWhEeLNEAL

OH SCHNAPP - yours is SOLID. Nah ours isnt solid but the inner wall is thicker than the vortex so they're a little stronger. Hmmmmm I dunno if I'd personally wanna use solid right now just coz Im such a squid and all but one day I could see me doing that

Thats when I'll hit u up to get your aluminum guys info lol

solid is only a tiny bit stronger than what we use

MikeM · 11-07-2009, 06:03 PM

Quote:

Originally Posted by toneth

Gah all this shit is discouraging... The exhaust won't line up either, and when I went to put it down I laid it down in a pile of dogshit.

Gonna be about $600 to get everything I need. I'll be ordering it all on Friday.

stunter exhaust pipes never line up unless theyre new. yougotta make a bracket

BOB WITTMAN · 11-07-2009, 08:56 PM

Quote:

Originally Posted by ScottFuries

slept in....yawn

yo bro you live closer to philly now??

StrictlyStunt · 11-07-2009, 09:10 PM

Quote:

Originally Posted by ScottFuries

slept in....yawn

I slept too

i didnt get to the lot till 330

Quote:

Originally Posted by BOB WITTMAN

yo bro you live closer to philly now??

he's up round jim thorpe area...

You comin ridin tomorrow?

inolen · 11-07-2009, 10:41 PM

Quote:

Originally Posted by toneth

Gah all this shit is discouraging... The exhaust won't line up either, and when I went to put it down I laid it down in a pile of dogshit.

Gonna be about $600 to get everything I need. I'll be ordering it all on Friday.

Should have bought Leah's bike

OnEWhEeLNEAL · 11-07-2009, 10:48 PM

Quote:

Originally Posted by inolen

Should have bought Leah's bike

+ motherfuckin One Million. 1600 for the bike - 600 for parts but what does that include??? Is that cage, bar & everything you need or 600 to get it running but then you still need a cage bar and whatever else??? All said and done as you piece shit together - its gonna be more than the cost of Leah's bike to have all the same goodies. You shoulda gave a deposit and paid in off in a month coz you said its gonna be a month until youre ready to start rippin on it anyway. Complete

move

MikeM · 11-07-2009, 10:49 PM

Quote:

Originally Posted by inolen

Should have bought Leah's bike

i think her bike was a little too hooked up for him

OnEWhEeLNEAL · 11-07-2009, 10:56 PM

Quote:

Originally Posted by MikeM

i think her bike was a little too hooked up for him

yeah it had too much good stuff on there for Sloth

Off to the garage

I been lazy but Im gettin busy now. Lookin forward to wheelies tomorrow. Hopefully I'll have idle on the tank tomorrow. I caught idle a few times but not smoothly

toneth · 11-07-2009, 11:17 PM

Quote:

Originally Posted by OnEWhEeLNEAL

+ motherfuckin One Million. 1600 for the bike - 600 for parts but what does that include??? Is that cage, bar & everything you need or 600 to get it running but then you still need a cage bar and whatever else??? All said and done as you piece shit together - its gonna be more than the cost of Leah's bike to have all the same goodies. You shoulda gave a deposit and paid in off in a month coz you said its gonna be a month until youre ready to start rippin on it anyway. Complete

move

$600 includes
A town Cage
sick Bar
Throttle & Clutch Cables
Rearsets
Your MSR
various bolts
cowl
brake fluid & oil
rear tire

Yeah I coulda got mondays for $900 more even or leahs for a bit more. Oh and Neal.. if you didn't hear anything about the form, don't sweat it. That kid Anthony seemed legit and when I bought the bike said if I needed the bill of sale he'd meet me half way or something. I'll just ride out there next weekend and get it and get your MSR in the process.

joejoe898 · 11-07-2009, 11:17 PM

Quote:

Originally Posted by inolen

Should have bought Leah's bike

THANKS 4 getin back to me about leah's bike ur the man

toneth · 11-07-2009, 11:18 PM

Quote:

Originally Posted by OnEWhEeLNEAL

yeah it had too much good stuff on there for Sloth

I'm not THAT tall you oompa loompa mothafucka.

11-07-2009, 02:13 PM	#21164
Ethiopian Soup Mafia Join Date: Sep 2006 Location: Vero Beach, Fl USA Age: 21 Bike: 04 zx6rr Gender: Male Posts: 7,372	Re: Calling aLL NY stunters and stunteresses zac uses solid steel in his lmao. i smashed my f4i into the ground and never broke a clamp but i dont really crank mine down crazy so they will rotate in a hard wreck. __________________ Soup Mafia

11-07-2009, 02:16 PM	#21165
Ethiopian Soup Mafia Join Date: Sep 2006 Location: Vero Beach, Fl USA Age: 21 Bike: 04 zx6rr Gender: Male Posts: 7,372	Re: Calling aLL NY stunters and stunteresses i dont go to a aluminum guy i just get it from the local fastenal. __________________ Soup Mafia

11-07-2009, 03:19 PM	#21167
toneth Zippy Tie Rider Join Date: Mar 2009 Location: SI NYC Age: 25 Bike: 08 GSXR600, 01 F4i Gender: Male Posts: 2,235	Re: Calling aLL NY stunters and stunteresses Gah all this shit is discouraging... The exhaust won't line up either, and when I went to put it down I laid it down in a pile of dogshit. Gonna be about $600 to get everything I need. I'll be ordering it all on Friday.