F4i clutch arm mod... weld-less version. - Page 2

cashmoneyflo · 03-13-2008, 01:23 PM

can the same idea be used on a R6?

This ad is not displayed to registered members.
Register your free account today and become a member on StuntLife !

*nags* · 03-13-2008, 01:26 PM

Quote:

Originally Posted by Jt321

can you do this mode + ez pull lever? Will that be too much?

Thats the way to go. Friend of mine had it like that. Was sick.

NINER · 03-13-2008, 01:30 PM

I got the mod done and an easy pull set on the middle setting.

old man roger · 03-13-2008, 02:04 PM

making the arm longer will give you the same result

old man roger · 03-13-2008, 02:04 PM

Quote:

Originally Posted by cashmoneyflo

can the same idea be used on a R6?

haven't looked at the arm on an r6 but if there is room then it will work

NINER · 03-13-2008, 02:07 PM

Quote:

Originally Posted by old man roger

making the arm longer will give you the same result

It's as long as you can put on an f4i. I had to tapp it past the frame with a hammer as it was.

old man roger · 03-13-2008, 02:10 PM

Quote:

Originally Posted by NINER

It's as long as you can put on an f4i. I had to tapp it past the frame with a hammer as it was.

if you do it like the one in this thread you can go longer .....

you could still weld it or bolt it

NINER · 03-13-2008, 02:17 PM

Quote:

Originally Posted by old man roger

if you do it like the one in this thread you can go longer .....

I could have a bolt loosen up mid coaster and dump the clutch too, but I'd rather not.

old man roger · 03-13-2008, 02:25 PM

Quote:

Originally Posted by old man roger

if you do it like the one in this thread you can go longer .....

you could still weld it or bolt it

Quote:

Originally Posted by NINER

I could have a bolt loosen up mid coaster and dump the clutch too, but I'd rather not.

NINER · 03-13-2008, 02:30 PM

Bitch, don't make me come over there and kick your old ass out of your motorized scooter.

old man roger · 03-13-2008, 02:33 PM

Quote:

Originally Posted by NINER

Bitch, don't make me come over there and kick your old ass out of your motorized scooter.

you kinda big too , i shut up now

cirtem · 03-13-2008, 02:34 PM

OMR find a way to do this to a 600RR cause i've been trying...
i've thought about going up and over the case with the arm
slightly shaving the case to fit it (worst idea i've had lol)
there has got to be a way....

i want easy pull
i felt my buddies extended arm plus MSR and i wanted to kill myself haha

old man roger · 03-13-2008, 02:43 PM

Quote:

Originally Posted by cirtem

OMR find a way to do this to a 600RR cause i've been trying...
i've thought about going up and over the case with the arm
slightly shaving the case to fit it (worst idea i've had lol)
there has got to be a way....

i want easy pull
i felt my buddies extended arm plus MSR and i wanted to kill myself haha

some one did it exactly as you described it and they started a thread but i don't remember who it was....

Johnf · 03-13-2008, 03:11 PM

WOW,,,,, talk about blown out of the water,,,,,, i came up with a similer idea in dec and made a few and sent them around to some of the CO's around this indestry to see what thay thought about masspro this easy bolt on extion for the clutch arm,,,,, i made mine so you did not have to drill the stock arm,, and mad it so it had three settings like an easypull lever,,,, iv been runing mine for all three months now and nothing has loosened up,, and it is the sickest thing iv ever felt in the way of a clutch lever,, but i do use it with a MSR pro,,, i had to get used to how easy it pulled,,,, i found my self slipin the clutch a little when i didnt want to,,,,,, ill put pics of it and the insrutions for it on here when i get home,,,,,,, your idea works good cause the piece i made had to be welded together,,,,,,,,,,,,,, i knew i wasent that smart and somebody else was going to think of the same thing,,,,,,,,,,,,,,,,, good shit man and keep the good ideas comin

polish projecti · 03-13-2008, 04:40 PM

Quote:

Originally Posted by cirtem

OMR find a way to do this to a 600RR cause i've been trying...
i've thought about going up and over the case with the arm
slightly shaving the case to fit it (worst idea i've had lol)
there has got to be a way....

i want easy pull
i felt my buddies extended arm plus MSR and i wanted to kill myself haha

+1

but im thinking maybe with this drilling and adding (instead of welding) you could make the arm taller and then make it come over the case... if that makes any sense lol.

kj · 03-13-2008, 04:51 PM

Quote:

Originally Posted by NINER

I could have a bolt loosen up mid coaster and dump the clutch too, but I'd rather not.

This thought went through my mind too... until I felt how tight these bolts fit... + the red locktite.

The 6mm bolts are slightly too big for the 11/64 (shit i don't remember the exact size?) holes i drilled.

I'll be checking them daily just to be safe.

Quote:

Originally Posted by polish projecti

+1

but im thinking maybe with this drilling and adding (instead of welding) you could make the arm taller and then make it come over the case... if that makes any sense lol.

This would probably work.... if not too tall.

andreeoidee · 03-13-2008, 04:54 PM

chuje.....

polish projecti · 03-13-2008, 04:55 PM

Quote:

Originally Posted by kj

This would probably work.... if not too tall.

im thinken a bolt with one or two nuts in between the new arm for height and then bolted on top... hahaha god this is gonna look ghetto

eazenutz33 · 03-13-2008, 05:52 PM

Quote:

Originally Posted by Jt321

can you do this mode + ez pull lever? Will that be too much?

thats how mine is.....got the MSR, plus we added a shade over 3/4"

we used a wider thinner piece of steel when we welded it on...cause we ran into the problem towliee talked about, but with the wider, thinner piece of steel there I simply use a flat screw driver and pry it down to get the clutch cover back on, then once inside the frame it straightens out and works perfectly and is butta!

cashmoneyflo · 03-13-2008, 09:24 PM

doesnt look like i have room to do it on mine

03-13-2008, 01:30 PM	#23
NINER HATES ****ING SNOW!!!!! Join Date: Mar 2003 Location: Westland, MI Age: 29 Bike: '02 CRF450, '02 954, '06 DRZ400SM, '87 650SX Gender: Male Posts: 37,479	Re: F4i clutch arm mod... weld-less version. I got the mod done and an easy pull set on the middle setting. __________________ I NEED 954 PARTS! List of parts needed: http://www.stuntlife.com/forums/465-bike-parts-wanted/251223-954-parts-needed.html

03-13-2008, 02:04 PM	#24
old man roger also known as OMR Join Date: Jul 2006 Location: OMR INDUSTRIES in west palm beach florida Bike: OMR PREPPED 636 Gender: Male Posts: 74,220	Re: F4i clutch arm mod... weld-less version. making the arm longer will give you the same result

03-13-2008, 02:30 PM	#30
NINER HATES ****ING SNOW!!!!! Join Date: Mar 2003 Location: Westland, MI Age: 29 Bike: '02 CRF450, '02 954, '06 DRZ400SM, '87 650SX Gender: Male Posts: 37,479	Re: F4i clutch arm mod... weld-less version. Bitch, don't make me come over there and kick your old ass out of your motorized scooter. __________________ I NEED 954 PARTS! List of parts needed: http://www.stuntlife.com/forums/465-bike-parts-wanted/251223-954-parts-needed.html

03-13-2008, 02:34 PM	#32
cirtem Registered User Join Date: Nov 2006 Location: Calgary, []+[] Age: 25 Bike: '03 600RR, '06 crf50/88 Gender: Male Posts: 246	Re: F4i clutch arm mod... weld-less version. OMR find a way to do this to a 600RR cause i've been trying... i've thought about going up and over the case with the arm slightly shaving the case to fit it (worst idea i've had lol) there has got to be a way.... i want easy pull i felt my buddies extended arm plus MSR and i wanted to kill myself haha

03-13-2008, 03:11 PM	#34
Johnf Registered User Join Date: Dec 2004 Location: Jacksonville,nc damn it Age: 33 Bike: F4I Great White Shark Edition,2001 r/b 929rr 2001 cbr 929RR Eiron ED/ 05 gsxr600 Gender: Male Posts: 578	Re: F4i clutch arm mod... weld-less version. WOW,,,,, talk about blown out of the water,,,,,, i came up with a similer idea in dec and made a few and sent them around to some of the CO's around this indestry to see what thay thought about masspro this easy bolt on extion for the clutch arm,,,,, i made mine so you did not have to drill the stock arm,, and mad it so it had three settings like an easypull lever,,,, iv been runing mine for all three months now and nothing has loosened up,, and it is the sickest thing iv ever felt in the way of a clutch lever,, but i do use it with a MSR pro,,, i had to get used to how easy it pulled,,,, i found my self slipin the clutch a little when i didnt want to,,,,,, ill put pics of it and the insrutions for it on here when i get home,,,,,,, your idea works good cause the piece i made had to be welded together,,,,,,,,,,,,,, i knew i wasent that smart and somebody else was going to think of the same thing,,,,,,,,,,,,,,,,, good shit man and keep the good ideas comin Last edited by Johnf; 03-13-2008 at 03:21 PM.

03-13-2008, 04:54 PM	#37
andreeoidee Registered User Join Date: Jun 2005 Location: tr Age: 33 Bike: 600rr Gender: Male Posts: 17	Re: F4i clutch arm mod... weld-less version. chuje.....

03-13-2008, 09:24 PM	#40
cashmoneyflo Registered User Join Date: Jul 2007 Location: Lancaster, PA Age: 24 Bike: 04 R6 Gender: Male Posts: 728	Re: F4i clutch arm mod... weld-less version. doesnt look like i have room to do it on mine