05 600RR won't start - fuel pump isn't priming, headlights not coming on - Stunt Discussion

Hobie · 12-07-2007, 01:56 PM

I know this belongs elsewhere, but I'm in a hurry and that sub-forum gets NO traffic.

Bike is stock with 10K miles.

I would start checking fuses, but I have NO tools here, can't get the seat off ;-( I'm 70 miles away from my tools and other vehicle.

I'm hoping someone knows exactly what it is, then I'll walk to the auto parts store and buy exactly what tools I need to get to it. (like how the sensor in the airbox will make the low oil light come on if it comes unplugged, this could be something different than a fuse under the seat)

JoeR1 · 12-07-2007, 01:59 PM

so the gauges light up but when you flip the run switch the pump doesn't prime? Or no power at all? Did you try pop starting it?

JoeR1 · 12-07-2007, 02:02 PM

No tools in the stock tool kit location under the Mid fairing?

Hobie · 12-07-2007, 02:08 PM

Quote:

Originally Posted by JoeR1

so the gauges light up but when you flip the run switch the pump doesn't prime? Or no power at all? Did you try pop starting it?

Backlight for the gauges doesn't come on, neutral light does, oil light does, tach swings, speedo counts down to 0.

Tail light is on, bike spins over, but doesn't fire.

It actually started for a second when I first hopped on it, then died. Was running for two seconds or so.

I thought that was weird, but I got gas in this shithole in the sticks and thought maybe it was bad, so I bumped it again and it didn't start. Took me a minute to notice the headlights weren't on.

Took my helmet off, turned the key again, then noticed it wasn't priming.

No stock tool kit, I took it out. I usually ride with an emergency set of tools, but left my backpack at the shop. This is a nice minty bike, I had faith in it, apparently too much

JoeR1 · 12-07-2007, 02:12 PM

looks like you have to get that seat off at least and check the fuses first...try getting the allen screws with the key or something.

I changed my seat bolts to the quick pin locks so I don't need any tools to pull it off...comes in helpful.

Hobie · 12-07-2007, 02:25 PM

All I could find in the house was a pair of dikes, a crescent, some phillips screwdrivers, and lots of paint supplies (in a box marked tools)

So yeah, there is an autozone about a mile away, looks like it's time to get walking.

y2kmk · 12-07-2007, 02:31 PM

Hey faggot get on AIM or msg me back on dfwstangs, i got some ideas!

MikeM · 12-07-2007, 02:32 PM

Quote:

Originally Posted by JoeR1

I changed my seat bolts to the quick pin locks so I don't need any tools to pull it off...comes in helpful.

thats a good idea. im gettin some of those when i get home tonight

y2kmk · 12-07-2007, 02:33 PM

check the tip sensor hobe?

Hobie · 12-07-2007, 02:48 PM

Quote:

Originally Posted by y2kmk

check the tip sensor hobe?

Sent you a pm on DFW

Quote:

Originally Posted by MikeM

thats a good idea. im gettin some of those when i get home tonight

Sounds like a GREAT idea.

Hobie · 12-07-2007, 03:27 PM

Bought some allens, fuses inside the left mid are fine, so is the main fuse under the seat...AAARRRGGGHHH

dizzie56 · 12-07-2007, 03:31 PM

if its anything like the 05 ikrr then the main fuse would be under the seat. could be the battery dieing a bit. do you have a trickle charger? might also be the stator or even the rectifier as well...good luck

y2kmk · 12-07-2007, 03:32 PM

check tipover, seems liek that's all thats left to kill fuel delivery unless your FP just died.

Hobie · 12-07-2007, 04:19 PM

Shit is getting weird, I took all the fuses out of the left side box, put a 10A fuse in for start/bank angle sensor that was in one of the other slots.

Boom, pump primed, bike started. I just figured something went bad with the fuse, but didn't actually blow it. So I look at it and decide not to plug the fuse for the indicators in (because it's a 10A and I don't have blinkers anways) but when I plugged in the head light the bike died, same problem, turned the key and no prime.

I quickly tried a few things, so I don't remember the order, but I used a different order and I think it was when I plugged the gauges in the bike died.

Have to take them all out and put the run/bank angle fuse back in to start the bike, plugging them all in kills the bike, WTF?

OnEWhEeLNEAL · 12-07-2007, 04:57 PM

Quote:

Originally Posted by MikeM

thats a good idea. im gettin some of those when i get home tonight

I have a bunch laying around somewhere from my Ducati that I can bring to the spot. I'll let you know if I cant find em.

killthatoneguy · 12-07-2007, 08:19 PM

im gonna say that the bank angle sensor is jacked

Scott- · 12-07-2007, 08:25 PM

try posting this in the right area

Hobie · 12-08-2007, 12:30 AM

Quote:

Originally Posted by Scott-

try posting this in the right area

Seriously, first line of the first post.

Quote:

Originally Posted by Hobie

I know this belongs elsewhere, but I'm in a hurry and that sub-forum gets NO traffic.

I didn't make it to where I needed to be

Scott- · 12-08-2007, 02:39 AM

seriously post in the right section thats why theres a help and how to what are u fuckin new u set a shitty example for newbies coming to this site

Scott- · 12-08-2007, 02:41 AM

oh and the help and how to gets traffic if u post in the right section i mite help u with your prob and other guys will also

12-07-2007, 01:56 PM	#1
Hobie Registered User Join Date: Feb 2004 Location: F-U I'm from Texas Age: 27 Bike: Several these days Gender: Male Posts: 308	05 600RR won't start - fuel pump isn't priming, headlights not coming on I know this belongs elsewhere, but I'm in a hurry and that sub-forum gets NO traffic. Bike is stock with 10K miles. I would start checking fuses, but I have NO tools here, can't get the seat off ;-( I'm 70 miles away from my tools and other vehicle. I'm hoping someone knows exactly what it is, then I'll walk to the auto parts store and buy exactly what tools I need to get to it. (like how the sensor in the airbox will make the low oil light come on if it comes unplugged, this could be something different than a fuse under the seat)

12-07-2007, 01:59 PM	#2
JoeR1 Registered User Join Date: Jan 2005 Location: Woodbridge,Ct Age: Bike: 02 R1 Gender: Male Posts: 1,455	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on so the gauges light up but when you flip the run switch the pump doesn't prime? Or no power at all? Did you try pop starting it? Last edited by JoeR1 : 12-07-2007 at 02:01 PM.

12-07-2007, 02:02 PM	#3
JoeR1 Registered User Join Date: Jan 2005 Location: Woodbridge,Ct Age: Bike: 02 R1 Gender: Male Posts: 1,455	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on No tools in the stock tool kit location under the Mid fairing?

12-07-2007, 02:12 PM	#5
JoeR1 Registered User Join Date: Jan 2005 Location: Woodbridge,Ct Age: Bike: 02 R1 Gender: Male Posts: 1,455	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on looks like you have to get that seat off at least and check the fuses first...try getting the allen screws with the key or something. I changed my seat bolts to the quick pin locks so I don't need any tools to pull it off...comes in helpful.

12-07-2007, 02:25 PM	#6
Hobie Registered User Join Date: Feb 2004 Location: F-U I'm from Texas Age: 27 Bike: Several these days Gender: Male Posts: 308	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on All I could find in the house was a pair of dikes, a crescent, some phillips screwdrivers, and lots of paint supplies (in a box marked tools) So yeah, there is an autozone about a mile away, looks like it's time to get walking.

12-07-2007, 02:31 PM	#7
y2kmk Registered User Join Date: Mar 2004 Location: texas or vegas... hell i dont know. Age: Bike: thump* pitbike, 05 6durty6 Gender: Male Posts: 963	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on Hey faggot get on AIM or msg me back on dfwstangs, i got some ideas!

12-07-2007, 02:33 PM	#9
y2kmk Registered User Join Date: Mar 2004 Location: texas or vegas... hell i dont know. Age: Bike: thump* pitbike, 05 6durty6 Gender: Male Posts: 963	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on check the tip sensor hobe?

12-07-2007, 03:27 PM	#11
Hobie Registered User Join Date: Feb 2004 Location: F-U I'm from Texas Age: 27 Bike: Several these days Gender: Male Posts: 308	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on Bought some allens, fuses inside the left mid are fine, so is the main fuse under the seat...AAARRRGGGHHH

12-07-2007, 03:31 PM	#12
dizzie56 Registered User Join Date: Jul 2006 Location: Clearwater Age: 26 Bike: somethin that doesnt start....ever Gender: Male Posts: 2,130	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on if its anything like the 05 ikrr then the main fuse would be under the seat. could be the battery dieing a bit. do you have a trickle charger? might also be the stator or even the rectifier as well...good luck

12-07-2007, 03:32 PM	#13
y2kmk Registered User Join Date: Mar 2004 Location: texas or vegas... hell i dont know. Age: Bike: thump* pitbike, 05 6durty6 Gender: Male Posts: 963	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on check tipover, seems liek that's all thats left to kill fuel delivery unless your FP just died.

12-07-2007, 04:19 PM	#14
Hobie Registered User Join Date: Feb 2004 Location: F-U I'm from Texas Age: 27 Bike: Several these days Gender: Male Posts: 308	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on Shit is getting weird, I took all the fuses out of the left side box, put a 10A fuse in for start/bank angle sensor that was in one of the other slots. Boom, pump primed, bike started. I just figured something went bad with the fuse, but didn't actually blow it. So I look at it and decide not to plug the fuse for the indicators in (because it's a 10A and I don't have blinkers anways) but when I plugged in the head light the bike died, same problem, turned the key and no prime. I quickly tried a few things, so I don't remember the order, but I used a different order and I think it was when I plugged the gauges in the bike died. Have to take them all out and put the run/bank angle fuse back in to start the bike, plugging them all in kills the bike, WTF?

12-07-2007, 08:19 PM	#16
killthatoneguy Registered User Join Date: Sep 2007 Location: reno.nv Age: Bike: gsxr 600 Gender: Male Posts: 30	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on im gonna say that the bank angle sensor is jacked

12-07-2007, 08:25 PM	#17
Scott- I Enjoy Posting At StuntLife! Join Date: Apr 2006 Location: Apple Valley CA Age: 28 Bike: 2001cbr600f4i and a p.o.s 05 GSXR 6 STREETS Gender: Male Posts: 4,833	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on try posting this in the right area

12-08-2007, 02:39 AM	#19
Scott- I Enjoy Posting At StuntLife! Join Date: Apr 2006 Location: Apple Valley CA Age: 28 Bike: 2001cbr600f4i and a p.o.s 05 GSXR 6 STREETS Gender: Male Posts: 4,833	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on seriously post in the right section thats why theres a help and how to what are u fuckin new u set a shitty example for newbies coming to this site

12-08-2007, 02:41 AM	#20
Scott- I Enjoy Posting At StuntLife! Join Date: Apr 2006 Location: Apple Valley CA Age: 28 Bike: 2001cbr600f4i and a p.o.s 05 GSXR 6 STREETS Gender: Male Posts: 4,833	Re: 05 600RR won't start - fuel pump isn't priming, headlights not coming on oh and the help and how to gets traffic if u post in the right section i mite help u with your prob and other guys will also