What kinda stuff breaks on 636's?
Registered User
Joined: Jun 2004
Posts: 3,289
From: Toronto
Re: What kinda stuff breaks on 636's?
yeah I've seen the tucked frames, but I've also seen frames that just cracked. There was a 636 in the classifieds that had a welded crack on the right frame spar and T-dubby said that's exactly where his cracked too, but he replaced his instead of getting it welded. hmm, that's good to know
**** does happen and sometimes things break on their own, but that this is a cause for that type of crack....
F*(K Yut Uggh
Joined: May 2004
Posts: 1,421
From: Streets of Sacramento California
Re: What kinda stuff breaks on 636's?
**** learning circles I've broke all pegs on the left side three times. Having rear spool sliders helped a lot.
This bike is strong compared to my old 02 gsxr. Subframe tabs are MUCH stronger. All this bikes needs is a good cage, bar, front stay, cut down pegs, kleen mod, maybe rear spool sliders.
Others issues: small % of people have a problem with the forks and the rear tank mount bends every which way.
Besides that this bike is the shizzzzzzznit!
This bike is strong compared to my old 02 gsxr. Subframe tabs are MUCH stronger. All this bikes needs is a good cage, bar, front stay, cut down pegs, kleen mod, maybe rear spool sliders.
Others issues: small % of people have a problem with the forks and the rear tank mount bends every which way.
Besides that this bike is the shizzzzzzznit!
STUNTRIDE FRONTLINE
Joined: Jun 2005
Posts: 13,621
From: GEORGIA
Re: What kinda stuff breaks on 636's?
[QUOTE=287ridah;2727530]
Others issues: small % of people have a problem with the forks and the rear tank mount bends every which way.
QUOTE]
you mean the forks twisting in the clamps dont you.I can loosen the pinch bolts and staighten them and a few wheelies and endo's later its back how it was.At one point i was thinking up getting aftermarket tripple clams that would have a little more bite on the fork tubes.
Others issues: small % of people have a problem with the forks and the rear tank mount bends every which way.
QUOTE]
you mean the forks twisting in the clamps dont you.I can loosen the pinch bolts and staighten them and a few wheelies and endo's later its back how it was.At one point i was thinking up getting aftermarket tripple clams that would have a little more bite on the fork tubes.
Registered User
Joined: Feb 2006
Posts: 23,677
From: down souf
Re: What kinda stuff breaks on 636's?
***uuuugh,. ****. i just had some beers for lunch and i'm still on the clock...
Registered User
Joined: Jun 2006
Posts: 449
From: Delaware
Re: What kinda stuff breaks on 636's?
OH HELL NO BIATCH...YOU AINT PULLIN STOPPIES ON MY 636!!!
As far as the thread...I've rode both F4i's and 636's...I do like 636's better for endos...as far is which one is more durable...hell, if you're just started out, you're gonna brake sh*t on either one you choose...for the record, I recomend street fighterin the bitch until you learn anyway.
Registered User
Joined: May 2006
Posts: 458
From: New Bern, NC
Re: What kinda stuff breaks on 636's?
**** if anyone is gonna even succefully roll out a stoppie on Joe's perty 636 we all know it's gonna be me ... :YEAH :YEAH :YEAH :YEAH
hey man f4i's are sturdy..as far as stoppies go on them most people have problems with them cuz of the forks. so what they do it take 954 forks and switch everythign and that gives them better stoppies...
as far as the 636 goes..i'd have to choice it...they to me are better for stoppies...i mean how many people do u see rolling 8 or 900 ft stoppies on an f4i not sayin it isnt' happening but come on now...darius maybe... but 636's are preffered by most
:YEAH :YEAH :YEAH :YEAH hey man f4i's are sturdy..as far as stoppies go on them most people have problems with them cuz of the forks. so what they do it take 954 forks and switch everythign and that gives them better stoppies...
as far as the 636 goes..i'd have to choice it...they to me are better for stoppies...i mean how many people do u see rolling 8 or 900 ft stoppies on an f4i not sayin it isnt' happening but come on now...darius maybe... but 636's are preffered by most
Registered User
Joined: Feb 2006
Posts: 23,677
From: down souf
Re: What kinda stuff breaks on 636's?
**** if anyone is gonna even succefully roll out a stoppie on Joe's perty 636 we all know it's gonna be me ... :YEAH :YEAH :YEAH :YEAH
hey man f4i's are sturdy..as far as stoppies go on them most people have problems with them cuz of the forks. so what they do it take 954 forks and switch everythign and that gives them better stoppies...
as far as the 636 goes..i'd have to choice it...they to me are better for stoppies...i mean how many people do u see rolling 8 or 900 ft stoppies on an f4i not sayin it isnt' happening but come on now...darius maybe... but 636's are preffered by most
:YEAH :YEAH :YEAH :YEAH hey man f4i's are sturdy..as far as stoppies go on them most people have problems with them cuz of the forks. so what they do it take 954 forks and switch everythign and that gives them better stoppies...
as far as the 636 goes..i'd have to choice it...they to me are better for stoppies...i mean how many people do u see rolling 8 or 900 ft stoppies on an f4i not sayin it isnt' happening but come on now...darius maybe... but 636's are preffered by most
Registered User
Joined: Feb 2006
Posts: 23,677
From: down souf
Re: What kinda stuff breaks on 636's?
OH HELL NO BIATCH...YOU AINT PULLIN STOPPIES ON MY 636!!!
As far as the thread...I've rode both F4i's and 636's...I do like 636's better for endos...as far is which one is more durable...hell, if you're just started out, you're gonna brake sh*t on either one you choose...for the record, I recomend street fighterin the bitch until you learn anyway.
As far as the thread...I've rode both F4i's and 636's...I do like 636's better for endos...as far is which one is more durable...hell, if you're just started out, you're gonna brake sh*t on either one you choose...for the record, I recomend street fighterin the bitch until you learn anyway.
Thread Starter
Registered User
Joined: Nov 2006
Posts: 2,698
From: ..
Re: What kinda stuff breaks on 636's?
**** if anyone is gonna even succefully roll out a stoppie on Joe's perty 636 we all know it's gonna be me ... :YEAH :YEAH :YEAH :YEAH
hey man f4i's are sturdy..as far as stoppies go on them most people have problems with them cuz of the forks. so what they do it take 954 forks and switch everythign and that gives them better stoppies...
as far as the 636 goes..i'd have to choice it...they to me are better for stoppies...i mean how many people do u see rolling 8 or 900 ft stoppies on an f4i not sayin it isnt' happening but come on now...darius maybe... but 636's are preffered by most
:YEAH :YEAH :YEAH :YEAH hey man f4i's are sturdy..as far as stoppies go on them most people have problems with them cuz of the forks. so what they do it take 954 forks and switch everythign and that gives them better stoppies...
as far as the 636 goes..i'd have to choice it...they to me are better for stoppies...i mean how many people do u see rolling 8 or 900 ft stoppies on an f4i not sayin it isnt' happening but come on now...darius maybe... but 636's are preffered by most
http://www.esd-mfg.com/esd/products/rearsets.php
Crash and Trachito need to get to work and stop day dreamin about doin stoppies on my "perty" 636
Registered User
Joined: Feb 2006
Posts: 23,677
From: down souf
Re: What kinda stuff breaks on 636's?
Thread Starter
Registered User
Joined: Nov 2006
Posts: 2,698
From: ..
Re: What kinda stuff breaks on 636's?
So has anyone used these rear sets on an F4i? They look pretty tough right?
http://www.esd-mfg.com/esd/products/rearsets.php
http://www.esd-mfg.com/esd/products/rearsets.php
Registered User
Joined: Feb 2006
Posts: 23,677
From: down souf
Re: What kinda stuff breaks on 636's?
So has anyone used these rear sets on an F4i? They look pretty tough right?
http://www.esd-mfg.com/esd/products/rearsets.php
http://www.esd-mfg.com/esd/products/rearsets.php
everybody seems to recommend woodcraft though. so i dont know.
Registered User
Joined: Nov 2004
Posts: 2,401
From: Sunny SW Florida
Re: What kinda stuff breaks on 636's?
people recommended woodcrafts because that's pretty much all there was.... and vortex... those esd's are the new hotness:YEAH I'd like to know how much different they are from the stock footpeg loction.. woodcrafts and vortex generally moved your foot up and further back, which is conducive to racing.
