check out my hb bracket - Page 2 - Psycho Boyz - PBZ

Shawn_PBZ · 04-14-2006, 01:11 AM

i can't believe there isn't a company out there that will design and sell one, that would be a hot item i would think

Kyle_PBZ · 04-14-2006, 10:19 AM

There was supposed to be but they dropped the ball on that idea I guess.

Shawn_PBZ · 04-14-2006, 10:41 AM

i wonder why? liability??

Kyle_PBZ · 04-14-2006, 01:29 PM

Some place out of Ohio. I contacted them and they said they were getting ready to do one. Never heard back from them and no replies to emails. So who knows.

Wheeliest · 04-14-2006, 02:00 PM

when it comes to welding aluminum u gotta have them lay knickels on that crap n let that bracket sit for 2 weeks so the aluminum cures. and don't GRIND OFF the damn welds.

LEASNIT · 04-15-2006, 04:04 AM

Quote:

Originally Posted by Wheeliest

when it comes to welding aluminum u gotta have them lay knickels on that crap n let that bracket sit for 2 weeks so the aluminum cures. and don't GRIND OFF the damn welds.

Alum cures? Cancer?... Nickles? I mean I can lay beauty beads all day, doesnt mean there's penetration ... like Niner said, cast is very poris ... when welding to cast it needs to cool slowly, 2 weeks? No.. PAINT doesnt even take 2 weeks to cure.. lol... Not sure about alum, but cast steel/iron needs to be cooled in sand, or it'll become brittle...

Wheeliest · 04-15-2006, 04:24 AM

i don't know anything. your right. its the metals fault for being crappy cast right...

Kolat · 04-15-2006, 06:43 AM

I'd get it all back together like it was before you put it on, then instead of actully putting it on the bike, find someplace with a CNC machine and bring some beer and trade beer for them making a copy of yours on the CNC machine, mabey even get it done out of titanium or at least a nice strong aluminum :-)

T

Kyle_PBZ · 04-15-2006, 10:56 AM

That's a good idea too. Then you can make a bunch and sell them and get rich. Why didn't I think of this?! lol

Shawn_PBZ · 04-15-2006, 12:44 PM

i'm off to the liquor store to buy some beer

LEASNIT · 04-15-2006, 12:54 PM

Quote:

Originally Posted by Shawn_PBZ

i'm off to the liquor store to buy some beer

You can find someone to program a cnc for beer, let me know ... I'll be a millionare... :YEAH :YEAH

LEASNIT · 04-15-2006, 12:55 PM

Quote:

Originally Posted by Wheeliest

i don't know anything. your right.

I mean u proved that in ur first post, didnt need a 2nd one to point out the obvious.

Kolat · 04-15-2006, 06:03 PM

Quote:

Originally Posted by LEASIN IT

You can find someone to program a cnc for beer, let me know ... I'll be a millionare... :YEAH :YEAH

One of my friends used to do it, not sure if he still runs the CNC machine at his work though. I used to have some problems with breaking axles in my old RC car.....Titanium ones fixed that problem :-)

T

Shawn_PBZ · 04-15-2006, 07:54 PM

Quote:

Originally Posted by Kolat

One of my friends used to do it, not sure if he still runs the CNC machine at his work though. I used to have some problems with breaking axles in my old RC car.....Titanium ones fixed that problem :-)

T

i don't think the welding shop that i use has a CNC machine, i live in a pretty small town , not much high tech shop's or machine's for that matter here
its good to know people

420gsxr1000 · 04-17-2006, 12:47 AM

id still but one!!!

let me know when ya mock up a 03-04 gix 1000!!! lol

nohands · 06-02-2006, 02:13 AM

905 has one out now for the 636,I just got a pro. valve welded in my lower m.c. and it works like a champ, i work at a machine shop and everyone loves beer there,and even at that there is no way they would program shit for beer. takes a lot of time to mock everything up and write the program, the bracket did look really really nice...oh and my 636 has been a pain in the ass lately too, there brittle peices of shit..... or maybe im just hard on it....

Shawn_PBZ · 06-02-2006, 10:18 AM

i'm ready to change mine back to a dual caliper, i'm not liking the mushy feel with cheap hb kit i am using. i will have to check the 905 guys and get me one of those

mnchvgs79 · 06-02-2006, 10:48 AM

Couldn't you just get custom brake lines made with a 3 way splitter... one to the foot brake and one to the hand brake?

Kyle_PBZ · 06-03-2006, 12:26 AM

Quote:

Originally Posted by mnchvgs79

Couldn't you just get custom brake lines made with a 3 way splitter... one to the foot brake and one to the hand brake?

Won't work that way. I'd explain but don't feel like it now.

mnchvgs79 · 06-03-2006, 02:55 AM

Quote:

Originally Posted by Kyle_PBZ

Won't work that way. I'd explain but don't feel like it now.

When you feel up to it, I'd like to know why....

04-14-2006, 01:11 AM	#21
Shawn_PBZ Registered User Join Date: Nov 2002 Location: Centralia, IL Age: 27 Bike: 03' 636, 50 Gender: Male Posts: 1,353	Re: check out my hb bracket i can't believe there isn't a company out there that will design and sell one, that would be a hot item i would think

04-14-2006, 10:19 AM	#22
Kyle_PBZ 2 WHEELS UP! Join Date: Oct 2002 Location: So. IL Age: 32 Bike: 1970 Honda S90 Gender: Male Posts: 6,084	Re: check out my hb bracket There was supposed to be but they dropped the ball on that idea I guess. __________________ www.psychoboyz.com

04-14-2006, 10:41 AM	#23
Shawn_PBZ Registered User Join Date: Nov 2002 Location: Centralia, IL Age: 27 Bike: 03' 636, 50 Gender: Male Posts: 1,353	Re: check out my hb bracket i wonder why? liability??

04-14-2006, 01:29 PM	#24
Kyle_PBZ 2 WHEELS UP! Join Date: Oct 2002 Location: So. IL Age: 32 Bike: 1970 Honda S90 Gender: Male Posts: 6,084	Re: check out my hb bracket Some place out of Ohio. I contacted them and they said they were getting ready to do one. Never heard back from them and no replies to emails. So who knows. __________________ www.psychoboyz.com

04-14-2006, 02:00 PM	#25
Wheeliest I Love To Post! Join Date: May 2004 Location: Avondale Az Age: 25 Bike: 03 954 RRRRR Gender: Male Posts: 8,812	Re: check out my hb bracket when it comes to welding aluminum u gotta have them lay knickels on that crap n let that bracket sit for 2 weeks so the aluminum cures. and don't GRIND OFF the damn welds. __________________ I Powder Coat - PM ME! WWW.FOX-CONCEPTS.COM coming soon...

04-15-2006, 04:24 AM	#27
Wheeliest I Love To Post! Join Date: May 2004 Location: Avondale Az Age: 25 Bike: 03 954 RRRRR Gender: Male Posts: 8,812	Re: check out my hb bracket i don't know anything. your right. its the metals fault for being crappy cast right... __________________ I Powder Coat - PM ME! WWW.FOX-CONCEPTS.COM coming soon...

04-15-2006, 06:43 AM	#28
Kolat Registered User Join Date: Jul 2005 Location: Warshington Age: 26 Bike: f4easy Gender: Male Posts: 553	Re: check out my hb bracket I'd get it all back together like it was before you put it on, then instead of actully putting it on the bike, find someplace with a CNC machine and bring some beer and trade beer for them making a copy of yours on the CNC machine, mabey even get it done out of titanium or at least a nice strong aluminum :-) T

04-15-2006, 10:56 AM	#29
Kyle_PBZ 2 WHEELS UP! Join Date: Oct 2002 Location: So. IL Age: 32 Bike: 1970 Honda S90 Gender: Male Posts: 6,084	Re: check out my hb bracket That's a good idea too. Then you can make a bunch and sell them and get rich. Why didn't I think of this?! lol __________________ www.psychoboyz.com

04-15-2006, 12:44 PM	#30
Shawn_PBZ Registered User Join Date: Nov 2002 Location: Centralia, IL Age: 27 Bike: 03' 636, 50 Gender: Male Posts: 1,353	Re: check out my hb bracket i'm off to the liquor store to buy some beer

04-17-2006, 12:47 AM	#35
420gsxr1000 Registered User Join Date: Jan 2006 Location: c'bus oHIGHo Age: 39 Bike: 04gixxxk1 Gender: Male Posts: 170	Re: check out my hb bracket id still but one!!! let me know when ya mock up a 03-04 gix 1000!!! lol

06-02-2006, 02:13 AM	#36
nohands Registered User Join Date: May 2004 Location: Crystal Lake, IL Age: 25 Bike: 04 kawi 636, 04 GSXR 750 Gender: Male Posts: 405	Re: check out my hb bracket 905 has one out now for the 636,I just got a pro. valve welded in my lower m.c. and it works like a champ, i work at a machine shop and everyone loves beer there,and even at that there is no way they would program shit for beer. takes a lot of time to mock everything up and write the program, the bracket did look really really nice...oh and my 636 has been a pain in the ass lately too, there brittle peices of shit..... or maybe im just hard on it....

06-02-2006, 10:18 AM	#37
Shawn_PBZ Registered User Join Date: Nov 2002 Location: Centralia, IL Age: 27 Bike: 03' 636, 50 Gender: Male Posts: 1,353	Re: check out my hb bracket i'm ready to change mine back to a dual caliper, i'm not liking the mushy feel with cheap hb kit i am using. i will have to check the 905 guys and get me one of those

06-02-2006, 10:48 AM	#38
mnchvgs79 Registered User Join Date: Nov 2003 Location: Nash-Lantic City, NH Age: 29 Bike: Sellout on a Harley Gender: Male Posts: 1,778	Re: check out my hb bracket Couldn't you just get custom brake lines made with a 3 way splitter... one to the foot brake and one to the hand brake? __________________ www.vacustoms.com